[PATCH V2 3/4] clk: meson: c3: add support for the C3 SoC PLL clock
Jerome Brunet
jbrunet at baylibre.com
Tue Oct 17 06:06:19 PDT 2023
On Tue 17 Oct 2023 at 14:15, Xianwei Zhao <xianwei.zhao at amlogic.com> wrote:
> Hi Jerome,
>
>
> On 2023/10/13 15:49, Jerome Brunet wrote:
>> [ EXTERNAL EMAIL ]
>> On Tue 10 Oct 2023 at 14:29, Xianwei Zhao <xianwei.zhao at amlogic.com>
>> wrote:
>>
>>> Add the C3 PLL clock controller driver for the Amlogic C3 SoC family.
>>>
>>> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
>>> ---
>>> V1 -> V2: Delete macro definition.
>>> ---
>>> drivers/clk/meson/Kconfig | 12 +
>>> drivers/clk/meson/Makefile | 1 +
>>> drivers/clk/meson/c3-pll.c | 808 +++++++++++++++++++++++++++++++++++++
>>> drivers/clk/meson/c3-pll.h | 35 ++
>>> 4 files changed, 856 insertions(+)
>>> create mode 100644 drivers/clk/meson/c3-pll.c
>>> create mode 100644 drivers/clk/meson/c3-pll.h
>>>
>>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>>> index c5303e4c1604..76be4bbd2afb 100644
>>> --- a/drivers/clk/meson/Kconfig
>>> +++ b/drivers/clk/meson/Kconfig
>>> @@ -128,6 +128,18 @@ config COMMON_CLK_A1_PERIPHERALS
>>> device, A1 SoC Family. Say Y if you want A1 Peripherals clock
>>> controller to work.
>>>
>>> +config COMMON_CLK_C3_PLL
>>> + tristate "Amlogic C3 PLL clock controller"
>>> + default y
>>> + select COMMON_CLK_MESON_REGMAP
>>> + select COMMON_CLK_MESON_PLL
>>> + select COMMON_CLK_MESON_CLKC_UTILS
>>> + help
>>> + Support for the PLL clock controller on Amlogic C302X and C308L devices,
>>> + AKA c3. Amlogic C302X and C308L devices include AW402, AW409 and AW419.
>>> + Say Y if you want the board to work, because PLLs are the parent of most
>>> + peripherals.
>>> +
>>> config COMMON_CLK_G12A
>>> tristate "G12 and SM1 SoC clock controllers support"
>>> depends on ARM64
>>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>>> index 9ee4b954c896..4420af628b31 100644
>>> --- a/drivers/clk/meson/Makefile
>>> +++ b/drivers/clk/meson/Makefile
>>> @@ -19,6 +19,7 @@ obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
>>> obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>>> obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
>>> obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
>>> +obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
>>> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>>> obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
>>> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
>>> diff --git a/drivers/clk/meson/c3-pll.c b/drivers/clk/meson/c3-pll.c
>>> new file mode 100644
>>> index 000000000000..97619bc7ab79
>>> --- /dev/null
>>> +++ b/drivers/clk/meson/c3-pll.c
>>> @@ -0,0 +1,808 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/*
>>> + * Amlogic C3 PLL Controller Driver
>>> + *
>>> + * Copyright (c) 2023 Amlogic, inc.
>>> + * Author: Chuan Liu <chuan.liu at amlogic.com>
>>> + */
>>> +
>>> +#include <linux/clk-provider.h>
>>> +#include <linux/of_device.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/clk.h>
>>> +#include "clk-regmap.h"
>>> +#include "clk-pll.h"
>>> +#include "c3-pll.h"
>>> +#include "meson-clkc-utils.h"
>>> +#include <dt-bindings/clock/amlogic,c3-pll-clkc.h>
>>> +
>>> +static const struct clk_parent_data pll_dco_parent = {
>>> + .fw_name = "pll_in",
>>> +};
>>> +
>>> +static const struct clk_parent_data mclk_pll_dco_parent = {
>>> + .fw_name = "mclk_pll_in",
>>> +};
>> I'm assuming this section relates to Documentation section 6.6.3.5 MPLL
>> because all the fixed clock looks very familiar.
>> Because of the naming of another clock below, I'm not quite sure. Please
>> clarify
>>
> MPLL is not included in C3 SoC. Document was not updated to reflect this
> change.
> Mclk_Pll is designed for sensor in C3 Soc.
>>> +
>>> +static struct clk_regmap fixed_pll_dco = {
>>> + .data = &(struct meson_clk_pll_data){
>>> + .en = {
>>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>>> + .shift = 28,
>>> + .width = 1,
>>> + },
>>> + .m = {
>>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>>> + .shift = 0,
>>> + .width = 8,
>>> + },
>>> + .n = {
>>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>>> + .shift = 16,
>>> + .width = 5,
>>> + },
>>> + .l = {
>>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>>> + .shift = 31,
>>> + .width = 1,
>>> + },
>>> + .rst = {
>>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>>> + .shift = 29,
>>> + .width = 1,
>>> + },
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "fixed_pll_dco",
>>> + .ops = &meson_clk_pll_ro_ops,
>>> + .parent_data = &pll_dco_parent,
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap fixed_pll = {
>>> + .data = &(struct clk_regmap_div_data){
>>> + .offset = ANACTRL_FIXPLL_CTRL0,
>>> + .shift = 12,
>>> + .width = 3,
>>> + .flags = CLK_DIVIDER_POWER_OF_TWO,
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "fixed_pll",
>>> + .ops = &clk_regmap_divider_ro_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fixed_pll_dco.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>> Need a comment about why this is using RO ops
>>
> Will do.
>
>>> +
>>> +static struct clk_fixed_factor fclk_div40_div = {
>>> + .mult = 1,
>>> + .div = 40,
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "fclk_div40_div",
>>> + .ops = &clk_fixed_factor_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fixed_pll.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap fclk_div40 = {
>>> + .data = &(struct clk_regmap_gate_data){
>>> + .offset = ANACTRL_FIXPLL_CTRL4,
>>> + .bit_idx = 0,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "fclk_div40",
>>> + .ops = &clk_regmap_gate_ro_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fclk_div40_div.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>> Don't see div40 in the diagram, where does it come from ?
>> The div40 is an alias of fixpll_clk50m in sec 6.6.5.3 about FIXPLL.
Then maybe clk50m something is better name for it
>>> +
>>> +static struct clk_fixed_factor fclk_div2_div = {
>>> + .mult = 1,
>>> + .div = 2,
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "fclk_div2_div",
>>> + .ops = &clk_fixed_factor_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fixed_pll.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap fclk_div2 = {
>>> + .data = &(struct clk_regmap_gate_data){
>>> + .offset = ANACTRL_FIXPLL_CTRL4,
>>> + .bit_idx = 24,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "fclk_div2",
>>> + .ops = &clk_regmap_gate_ro_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fclk_div2_div.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_fixed_factor fclk_div2p5_div = {
>>> + .mult = 2,
>>> + .div = 5,
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "fclk_div2p5_div",
>>> + .ops = &clk_fixed_factor_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fixed_pll.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>> This one is wrong if I follow the doc.
>> It is supposed to be fixed 8 divider taking it's source directly from
>> the DCO, skipping the OD post divider ... assuming the doc is up to date.
>>
> No, C3 SoC div2p5 is not skipping the OD post divider.
I a bit surprised there would be a frequency multiplier considering the
complexity of it, when skiping a divider is possible HW wise. Are you
sure ?
>>> +
>>> +static struct clk_regmap fclk_div2p5 = {
>>> + .data = &(struct clk_regmap_gate_data){
>>> + .offset = ANACTRL_FIXPLL_CTRL4,
>>> + .bit_idx = 4,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "fclk_div2p5",
>>> + .ops = &clk_regmap_gate_ro_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fclk_div2p5_div.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_fixed_factor fclk_div3_div = {
>>> + .mult = 1,
>>> + .div = 3,
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "fclk_div3_div",
>>> + .ops = &clk_fixed_factor_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fixed_pll.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap fclk_div3 = {
>>> + .data = &(struct clk_regmap_gate_data){
>>> + .offset = ANACTRL_FIXPLL_CTRL4,
>>> + .bit_idx = 20,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "fclk_div3",
>>> + .ops = &clk_regmap_gate_ro_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fclk_div3_div.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_fixed_factor fclk_div4_div = {
>>> + .mult = 1,
>>> + .div = 4,
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "fclk_div4_div",
>>> + .ops = &clk_fixed_factor_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fixed_pll.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap fclk_div4 = {
>>> + .data = &(struct clk_regmap_gate_data){
>>> + .offset = ANACTRL_FIXPLL_CTRL4,
>>> + .bit_idx = 21,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "fclk_div4",
>>> + .ops = &clk_regmap_gate_ro_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fclk_div4_div.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_fixed_factor fclk_div5_div = {
>>> + .mult = 1,
>>> + .div = 5,
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "fclk_div5_div",
>>> + .ops = &clk_fixed_factor_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fixed_pll.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap fclk_div5 = {
>>> + .data = &(struct clk_regmap_gate_data){
>>> + .offset = ANACTRL_FIXPLL_CTRL4,
>>> + .bit_idx = 22,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "fclk_div5",
>>> + .ops = &clk_regmap_gate_ro_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fclk_div5_div.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_fixed_factor fclk_div7_div = {
>>> + .mult = 1,
>>> + .div = 7,
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "fclk_div7_div",
>>> + .ops = &clk_fixed_factor_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fixed_pll.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap fclk_div7 = {
>>> + .data = &(struct clk_regmap_gate_data){
>>> + .offset = ANACTRL_FIXPLL_CTRL4,
>>> + .bit_idx = 23,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "fclk_div7",
>>> + .ops = &clk_regmap_gate_ro_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &fclk_div7_div.hw
>>> + },
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static const struct reg_sequence c3_gp0_init_regs[] = {
>>> + { .reg = ANACTRL_GP0PLL_CTRL1, .def = 0x0 },
This would change frac
>>> + { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x0 },
This might be OK
>> This should re-init GP0 rate on boot which is not desirable in case the
>> bootloader had already set a rate (for splash screen for example)
>> Sugguest you drop these
> If I drop these ,set rate will be failed.
> There are two differences between C3 SoC PLL and the previous SoC PLL.
> It recommends reconfiguring PLL according to time sequence each time when
> C3 PLL set rate. When previous SoC set rate, it set frequency related
> parameters and enable PLL after directly reset PLL about previous SoC.
> When setting C3 PLL, you need to reset a pll lock rst bit, otherwise the
> PLL lock bit will not refresh.
1. The amlogic off tree driver might using this for every set_rate() but
upstream does not. this is only used for init.
2. We have a rst parameter explicitly for this. This bit is poked. It is
part of the enable sequence.
>>
>>> + { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x48681c00 },
>>> + { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x88770290 },
>>> + { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x3927200a },
>>> + { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x56540000, .delay_us = 10 },
---
>>> + { .reg = ANACTRL_GP0PLL_CTRL0, .def = 0x080304fa },
>>> + { .reg = ANACTRL_GP0PLL_CTRL0, .def = 0x380304fa, .delay_us = 10 },
>>> + { .reg = ANACTRL_GP0PLL_CTRL0, .def = 0X180304fa }
This definitely is not.
For all I can tell, in addition to an hard coded rate,
This disable 'en' and 'rst', put them back to 1 - wait 10us then disable
rst again.
On set_rate() here what the current driver would do with this (assuming
the clock was enabled)
- disable: rst 0 -> 1 ; en 1 -> 0;
- set_rate : write m, n, and frac
- enable: en 0 -> 1; rst 1 -> 0;
If you think the current sequence used by clk-pll.c is not approriate,
feel free to submit a patch.
>>> +};
>>> +
>>> +static const struct pll_params_table c3_gp0_pll_params_table[] = {
>>> + PLL_PARAMS(150, 1), /* DCO = 3600M */
>>> + PLL_PARAMS(130, 1), /* DCO = 3120M */
>>> + PLL_PARAMS(192, 1), /* DCO = 4608M */
>>> + PLL_PARAMS(125, 1), /* DCO = 3000M */
>>> + { /* sentinel */ }
>>> +};
>> Why can't C3 use mult_range for GP0, like the other SoC ?
>> Doc says DCO can do 3 to 6GHz
>>
> The mult_range method is time-consuming and not suitable for scenarios
> requiring high frequency cutting performance.
Do you have numbers backing this up ?
I might be wrong but I don't think going through the mult_range
calculation is even a topic when you consider the time it takes to
relock the PLL or the delay added in the sequence.
> We generally only use a few commonly used frequencies.
You do yes. A driver is about enabling the HW, not just what a set of
people are doing with it.
>>> +
>>> +/* The maximum frequency divider supports is 32, not 128(2^7) */
>>> +static const struct clk_div_table c3_gp0_pll_od_table[] = {
>>> + { 0, 1 },
>>> + { 1, 2 },
>>> + { 2, 4 },
>>> + { 3, 8 },
>>> + { 4, 16 },
>>> + { 5, 32 },
>>> + { /* sentinel */ }
>>> +};
>> Please put that table next to the related divider
>> Same for other instances
>>
> Will do.
>>> +
>>> +static struct clk_regmap gp0_pll_dco = {
>>> + .data = &(struct meson_clk_pll_data){
>>> + .en = {
>>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>>> + .shift = 28,
>>> + .width = 1,
>>> + },
>>> + .m = {
>>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>>> + .shift = 0,
>>> + .width = 9,
>>> + },
>>> + .frac = {
>>> + .reg_off = ANACTRL_GP0PLL_CTRL1,
>>> + .shift = 0,
>>> + .width = 19,
>>> + },
>>> + .n = {
>>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>>> + .shift = 10,
>>> + .width = 5,
>>> + },
>>> + .l = {
>>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>>> + .shift = 31,
>>> + .width = 1,
>>> + },
>>> + .rst = {
>>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>>> + .shift = 29,
>>> + .width = 1,
>>> + },
>>> + .table = c3_gp0_pll_params_table,
>>> + .init_regs = c3_gp0_init_regs,
>>> + .init_count = ARRAY_SIZE(c3_gp0_init_regs),
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "gp0_pll_dco",
>>> + .ops = &meson_clk_pll_ops,
>>> + .parent_data = &pll_dco_parent,
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap gp0_pll = {
>>> + .data = &(struct clk_regmap_div_data){
>>> + .offset = ANACTRL_GP0PLL_CTRL0,
>>> + .shift = 16,
>>> + .width = 3,
>>> + .table = c3_gp0_pll_od_table,
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "gp0_pll",
>>> + .ops = &clk_regmap_divider_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &gp0_pll_dco.hw
>>> + },
>>> + .num_parents = 1,
>>> + .flags = CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>>> +static const struct reg_sequence c3_hifi_init_regs[] = {
>>> + { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x08010496 },
>>> + { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x38010496 },
>> Same here, this an hidden hard coded rate init, with enable on top.
>> Please drop this
>> If you need a specific rate after the init, use assigned-rate in DT
>>
>>> + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x0000ce40 },
>>> + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 },
>>> + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a285c00 },
>>> + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 },
>>> + { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x3927200a },
>>> + { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x56540000, .delay_us = 50 },
>>> + { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x18010496, .delay_us = 20 },
>>> +};
>>> +
>>> +static const struct pll_params_table c3_hifi_pll_params_table[] = {
>>> + PLL_PARAMS(150, 1), /* DCO = 3600M */
>>> + PLL_PARAMS(130, 1), /* DCO = 3120M */
>>> + PLL_PARAMS(192, 1), /* DCO = 4608M */
>>> + PLL_PARAMS(125, 1), /* DCO = 3000M */
>>> + { /* sentinel */ }
>>> +};
>> Again, why can't HiFi use mult range ?
>>
> The mult_range method is time-consuming and not suitable for scenarios
> requiring high frequency cutting performance.
Again, I'd be curious how this can be a problem when considering the
time it takes to reloc the PLL.
How often do you relock a PLL for HiFi use cases ?
>>> +
>>> +static struct clk_regmap hifi_pll_dco = {
>>> + .data = &(struct meson_clk_pll_data){
>>> + .en = {
>>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>>> + .shift = 28,
>>> + .width = 1,
>>> + },
>>> + .m = {
>>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>>> + .shift = 0,
>>> + .width = 8,
>>> + },
>>> + .frac = {
>>> + .reg_off = ANACTRL_HIFIPLL_CTRL1,
>>> + .shift = 0,
>>> + .width = 19,
>>> + },
>>> + .n = {
>>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>>> + .shift = 10,
>>> + .width = 5,
>>> + },
>>> + .l = {
>>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>>> + .shift = 31,
>>> + .width = 1,
>>> + },
>>> + .rst = {
>>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>>> + .shift = 29,
>>> + .width = 1,
>>> + },
>>> + .table = c3_hifi_pll_params_table,
>>> + .init_regs = c3_hifi_init_regs,
>>> + .init_count = ARRAY_SIZE(c3_hifi_init_regs),
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "hifi_pll_dco",
>>> + .ops = &meson_clk_pll_ops,
>>> + .parent_data = &pll_dco_parent,
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap hifi_pll = {
>>> + .data = &(struct clk_regmap_div_data){
>>> + .offset = ANACTRL_HIFIPLL_CTRL0,
>>> + .shift = 16,
>>> + .width = 2,
>>> + .flags = CLK_DIVIDER_POWER_OF_TWO,
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "hifi_pll",
>>> + .ops = &clk_regmap_divider_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &hifi_pll_dco.hw
>>> + },
>>> + .num_parents = 1,
>>> + .flags = CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>> I cannot make out what all the mclk section below relates to in
>> documentation clock. Could you please clarify ?
>>
>>> +static const struct reg_sequence c3_mclk_init_regs[] = {
>>> + { .reg = ANACTRL_MPLL_CTRL0, .def = 0x20011063 },
>>> + { .reg = ANACTRL_MPLL_CTRL0, .def = 0x30011063 },
>> Again, hidden rate set on init ...
>>
>>> + { .reg = ANACTRL_MPLL_CTRL1, .def = 0x1420500f },
>>> + { .reg = ANACTRL_MPLL_CTRL2, .def = 0x00023041 },
>>> + { .reg = ANACTRL_MPLL_CTRL3, .def = 0x18180000 },
>>> + { .reg = ANACTRL_MPLL_CTRL0, .def = 0x10011063 },
>>> + { .reg = ANACTRL_MPLL_CTRL2, .def = 0x00023001 }
>>> +};
>>> +
>>> +static const struct pll_params_table c3_mclk_pll_params_table[] = {
>>> + PLL_PARAMS(99, 1), /* VCO = 2376M */
>>> + { /* sentinel */ }
>>> +};
>>> +
>>> +static const struct clk_div_table c3_mpll_od_table[] = {
>>> + { 0, 1 },
>>> + { 1, 2 },
>>> + { 2, 4 },
>>> + { 3, 8 },
>>> + { 4, 16 },
>>> + { /* sentinel */ }
>>> +};
>>> +
>>> +static struct clk_regmap mclk_pll_dco = {
>>> + .data = &(struct meson_clk_pll_data){
>>> + .en = {
>>> + .reg_off = ANACTRL_MPLL_CTRL0,
>>> + .shift = 28,
>>> + .width = 1,
>>> + },
>>> + .m = {
>>> + .reg_off = ANACTRL_MPLL_CTRL0,
>>> + .shift = 0,
>>> + .width = 9,
>>> + },
>>> + .n = {
>>> + .reg_off = ANACTRL_MPLL_CTRL0,
>>> + .shift = 10,
>>> + .width = 5,
>>> + },
>>> + .l = {
>>> + .reg_off = ANACTRL_MPLL_CTRL0,
>>> + .shift = 31,
>>> + .width = 1,
>>> + },
>>> + .rst = {
>>> + .reg_off = ANACTRL_MPLL_CTRL0,
>>> + .shift = 29,
>>> + .width = 1,
>>> + },
>>> + .table = c3_mclk_pll_params_table,
>>> + .init_regs = c3_mclk_init_regs,
>>> + .init_count = ARRAY_SIZE(c3_mclk_init_regs),
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "mclk_pll_dco",
>>> + .ops = &meson_clk_pll_ops,
>>> + .parent_data = &mclk_pll_dco_parent,
>>> + .num_parents = 1,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap mclk_pll = {
>>> + .data = &(struct clk_regmap_div_data){
>>> + .offset = ANACTRL_MPLL_CTRL0,
>>> + .shift = 12,
>>> + .width = 3,
>>> + .table = c3_mpll_od_table,
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "mclk_pll",
>>> + .ops = &clk_regmap_divider_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &mclk_pll_dco.hw
>>> + },
>>> + .num_parents = 1,
>>> + .flags = CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap mclk_pll_clk = {
>>> + .data = &(struct clk_regmap_div_data){
>>> + .offset = ANACTRL_MPLL_CTRL4,
>>> + .shift = 16,
>>> + .width = 5,
>>> + .flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "mclk_pll_clk",
>>> + .ops = &clk_regmap_divider_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &mclk_pll.hw
>>> + },
>>> + .num_parents = 1,
>>> + .flags = CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>> "mclk_pll" then "mclk_pll_clk" ... that is confusing
>>
> Maybe mclk_pll rename mclk_pll_od.>> +
>>> +static const struct clk_parent_data mclk_parent[] = {
>>> + { .hw = &mclk_pll_clk.hw },
>>> + { .fw_name = "mclk_pll_in" },
>>> + { .hw = &fclk_div40.hw }
>>> +};
>>> +
>>> +static struct clk_regmap mclk0_sel = {
>>> + .data = &(struct clk_regmap_mux_data){
>>> + .offset = ANACTRL_MPLL_CTRL4,
>>> + .mask = 0x3,
>>> + .shift = 4,
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "mclk0_sel",
>>> + .ops = &clk_regmap_mux_ops,
>>> + .parent_data = mclk_parent,
>>> + .num_parents = ARRAY_SIZE(mclk_parent),
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap mclk0_sel_out = {
>>> + .data = &(struct clk_regmap_gate_data){
>>> + .offset = ANACTRL_MPLL_CTRL4,
>>> + .bit_idx = 1,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "mclk0_sel_out",
>>> + .ops = &clk_regmap_gate_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &mclk0_sel.hw
>>> + },
>>> + .num_parents = 1,
>>> + .flags = CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap mclk0_div = {
>>> + .data = &(struct clk_regmap_div_data){
>>> + .offset = ANACTRL_MPLL_CTRL4,
>>> + .shift = 2,
>>> + .width = 1,
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "mclk0_div",
>>> + .ops = &clk_regmap_divider_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &mclk0_sel_out.hw
>>> + },
>>> + .num_parents = 1,
>>> + .flags = CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap mclk0 = {
>>> + .data = &(struct clk_regmap_gate_data){
>>> + .offset = ANACTRL_MPLL_CTRL4,
>>> + .bit_idx = 0,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "mclk0",
>>> + .ops = &clk_regmap_gate_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &mclk0_div.hw
>>> + },
>>> + .num_parents = 1,
>>> + .flags = CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap mclk1_sel = {
>>> + .data = &(struct clk_regmap_mux_data){
>>> + .offset = ANACTRL_MPLL_CTRL4,
>>> + .mask = 0x3,
>>> + .shift = 12,
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "mclk1_sel",
>>> + .ops = &clk_regmap_mux_ops,
>>> + .parent_data = mclk_parent,
>>> + .num_parents = ARRAY_SIZE(mclk_parent),
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap mclk1_sel_out = {
>>> + .data = &(struct clk_regmap_gate_data){
>>> + .offset = ANACTRL_MPLL_CTRL4,
>>> + .bit_idx = 9,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "mclk1_sel_out",
>>> + .ops = &clk_regmap_gate_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &mclk1_sel.hw
>>> + },
>>> + .num_parents = 1,
>>> + .flags = CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap mclk1_div = {
>>> + .data = &(struct clk_regmap_div_data){
>>> + .offset = ANACTRL_MPLL_CTRL4,
>>> + .shift = 10,
>>> + .width = 1,
>>> + },
>>> + .hw.init = &(struct clk_init_data){
>>> + .name = "mclk1_div",
>>> + .ops = &clk_regmap_divider_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &mclk1_sel_out.hw
>>> + },
>>> + .num_parents = 1,
>>> + .flags = CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>>> +static struct clk_regmap mclk1 = {
>>> + .data = &(struct clk_regmap_gate_data){
>>> + .offset = ANACTRL_MPLL_CTRL4,
>>> + .bit_idx = 8,
>>> + },
>>> + .hw.init = &(struct clk_init_data) {
>>> + .name = "mclk1",
>>> + .ops = &clk_regmap_gate_ops,
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &mclk1_div.hw
>>> + },
>>> + .num_parents = 1,
>>> + .flags = CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>> +
>>> +static struct clk_hw *c3_pll_hw_clks[] = {
>>> + [CLKID_FIXED_PLL_DCO] = &fixed_pll_dco.hw,
>>> + [CLKID_FIXED_PLL] = &fixed_pll.hw,
>>> + [CLKID_FCLK_DIV40_DIV] = &fclk_div40_div.hw,
>>> + [CLKID_FCLK_DIV40] = &fclk_div40.hw,
>>> + [CLKID_FCLK_DIV2_DIV] = &fclk_div2_div.hw,
>>> + [CLKID_FCLK_DIV2] = &fclk_div2.hw,
>>> + [CLKID_FCLK_DIV2P5_DIV] = &fclk_div2p5_div.hw,
>>> + [CLKID_FCLK_DIV2P5] = &fclk_div2p5.hw,
>>> + [CLKID_FCLK_DIV3_DIV] = &fclk_div3_div.hw,
>>> + [CLKID_FCLK_DIV3] = &fclk_div3.hw,
>>> + [CLKID_FCLK_DIV4_DIV] = &fclk_div4_div.hw,
>>> + [CLKID_FCLK_DIV4] = &fclk_div4.hw,
>>> + [CLKID_FCLK_DIV5_DIV] = &fclk_div5_div.hw,
>>> + [CLKID_FCLK_DIV5] = &fclk_div5.hw,
>>> + [CLKID_FCLK_DIV7_DIV] = &fclk_div7_div.hw,
>>> + [CLKID_FCLK_DIV7] = &fclk_div7.hw,
>>> + [CLKID_GP0_PLL_DCO] = &gp0_pll_dco.hw,
>>> + [CLKID_GP0_PLL] = &gp0_pll.hw,
>>> + [CLKID_HIFI_PLL_DCO] = &hifi_pll_dco.hw,
>>> + [CLKID_HIFI_PLL] = &hifi_pll.hw,
>>> + [CLKID_MCLK_PLL_DCO] = &mclk_pll_dco.hw,
>>> + [CLKID_MCLK_PLL] = &mclk_pll.hw,
>>> + [CLKID_MCLK_PLL_CLK] = &mclk_pll_clk.hw,
>>> + [CLKID_MCLK0_SEL] = &mclk0_sel.hw,
>>> + [CLKID_MCLK0_SEL_OUT] = &mclk0_sel_out.hw,
>>> + [CLKID_MCLK0_DIV] = &mclk0_div.hw,
>>> + [CLKID_MCLK0] = &mclk0.hw,
>>> + [CLKID_MCLK1_SEL] = &mclk1_sel.hw,
>>> + [CLKID_MCLK1_SEL_OUT] = &mclk1_sel_out.hw,
>>> + [CLKID_MCLK1_DIV] = &mclk1_div.hw,
>>> + [CLKID_MCLK1] = &mclk1.hw
>>> +};
>>> +
>>> +/* Convenience table to populate regmap in .probe */
>>> +static struct clk_regmap *const c3_pll_clk_regmaps[] = {
>>> + &fixed_pll_dco,
>>> + &fixed_pll,
>>> + &fclk_div40,
>>> + &fclk_div2,
>>> + &fclk_div2p5,
>>> + &fclk_div3,
>>> + &fclk_div4,
>>> + &fclk_div5,
>>> + &fclk_div7,
>>> + &gp0_pll_dco,
>>> + &gp0_pll,
>>> + &hifi_pll_dco,
>>> + &hifi_pll,
>>> + &mclk_pll_dco,
>>> + &mclk_pll,
>>> + &mclk_pll_clk,
>>> + &mclk0_sel,
>>> + &mclk0_sel_out,
>>> + &mclk0_div,
>>> + &mclk0,
>>> + &mclk1_sel,
>>> + &mclk1_sel_out,
>>> + &mclk1_div,
>>> + &mclk1,
>>> +};
>>> +
>>> +static struct regmap_config clkc_regmap_config = {
>>> + .reg_bits = 32,
>>> + .val_bits = 32,
>>> + .reg_stride = 4,
>>> +};
>>> +
>>> +static struct meson_clk_hw_data c3_pll_clks = {
>>> + .hws = c3_pll_hw_clks,
>>> + .num = ARRAY_SIZE(c3_pll_hw_clks),
>>> +};
>>> +
>>> +static int aml_c3_pll_probe(struct platform_device *pdev)
>>> +{
>>> + struct device *dev = &pdev->dev;
>>> + struct regmap *regmap;
>>> + void __iomem *base;
>>> + int clkid, ret, i;
>>> +
>>> + base = devm_platform_ioremap_resource(pdev, 0);
>>> + if (IS_ERR(base))
>>> + return PTR_ERR(base);
>>> +
>>> + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
>>> + if (IS_ERR(regmap))
>>> + return PTR_ERR(regmap);
>>> +
>>> + /* Populate regmap for the regmap backed clocks */
>>> + for (i = 0; i < ARRAY_SIZE(c3_pll_clk_regmaps); i++)
>>> + c3_pll_clk_regmaps[i]->map = regmap;
>>> +
>>> + for (clkid = 0; clkid < c3_pll_clks.num; clkid++) {
>>> + /* array might be sparse */
>>> + if (!c3_pll_clks.hws[clkid])
>>> + continue;
>>> +
>>> + ret = devm_clk_hw_register(dev, c3_pll_clks.hws[clkid]);
>>> + if (ret) {
>>> + dev_err(dev, "Clock registration failed\n");
>>> + return ret;
>>> + }
>>> + }
>>> +
>>> + return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get,
>>> + &c3_pll_clks);
>>> +}
>>> +
>>> +static const struct of_device_id c3_pll_clkc_match_table[] = {
>>> + {
>>> + .compatible = "amlogic,c3-pll-clkc",
>>> + },
>>> + {}
>>> +};
>>> +MODULE_DEVICE_TABLE(of, c3_pll_clkc_match_table);
>>> +
>>> +static struct platform_driver c3_pll_driver = {
>>> + .probe = aml_c3_pll_probe,
>>> + .driver = {
>>> + .name = "c3-pll-clkc",
>>> + .of_match_table = c3_pll_clkc_match_table,
>>> + },
>>> +};
>>> +
>>> +module_platform_driver(c3_pll_driver);
>>> +MODULE_AUTHOR("Chuan Liu <chuan.liu at amlogic.com>");
>>> +MODULE_LICENSE("GPL");
>>> diff --git a/drivers/clk/meson/c3-pll.h b/drivers/clk/meson/c3-pll.h
>>> new file mode 100644
>>> index 000000000000..92a08196a46f
>>> --- /dev/null
>>> +++ b/drivers/clk/meson/c3-pll.h
>>> @@ -0,0 +1,35 @@
>>> +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
>>> +/*
>>> + * Copyright (c) 2023 Amlogic, inc.
>>> + * Author: Chuan Liu <chuan.liu at amlogic.com>
>>> + */
>>> +
>>> +#ifndef __AML_C3_PLL_H__
>>> +#define __AML_C3_PLL_H__
>>> +
>>> +#define ANACTRL_FIXPLL_CTRL0 0x0040
>>> +#define ANACTRL_FIXPLL_CTRL4 0x0050
>>> +#define ANACTRL_GP0PLL_CTRL0 0x0080
>>> +#define ANACTRL_GP0PLL_CTRL1 0x0084
>>> +#define ANACTRL_GP0PLL_CTRL2 0x0088
>>> +#define ANACTRL_GP0PLL_CTRL3 0x008c
>>> +#define ANACTRL_GP0PLL_CTRL4 0x0090
>>> +#define ANACTRL_GP0PLL_CTRL5 0x0094
>>> +#define ANACTRL_GP0PLL_CTRL6 0x0098
>>> +#define ANACTRL_GP0PLL_STS 0x009c
>>> +#define ANACTRL_HIFIPLL_CTRL0 0x0100
>>> +#define ANACTRL_HIFIPLL_CTRL1 0x0104
>>> +#define ANACTRL_HIFIPLL_CTRL2 0x0108
>>> +#define ANACTRL_HIFIPLL_CTRL3 0x010c
>>> +#define ANACTRL_HIFIPLL_CTRL4 0x0110
>>> +#define ANACTRL_HIFIPLL_CTRL5 0x0114
>>> +#define ANACTRL_HIFIPLL_CTRL6 0x0118
>>> +#define ANACTRL_HIFIPLL_STS 0x011c
>>> +#define ANACTRL_MPLL_CTRL0 0x0180
>>> +#define ANACTRL_MPLL_CTRL1 0x0184
>>> +#define ANACTRL_MPLL_CTRL2 0x0188
>>> +#define ANACTRL_MPLL_CTRL3 0x018c
>>> +#define ANACTRL_MPLL_CTRL4 0x0190
>>> +#define ANACTRL_MPLL_STS 0x01a4
>>> +
>>> +#endif /* __AML_C3_PLL_H__ */
>>
More information about the linux-amlogic
mailing list