[PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
Anand Moon
linux.amoon at gmail.com
Wed Nov 29 21:31:26 PST 2023
Add the binding example for the USB3.1 Genesys Logic GL3523
integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
hub.
For onboard hub controllers that support USB 3.x and USB 2.0 hubs
with shared resets and power supplies, this property is used to identify
the hubs with which these are shared.
[Conor Dooley: upgrade peer-hub description]
Signed-off-by: Anand Moon <linux.amoon at gmail.com>
---
v5: upgrade peer-hub description : Conor Dooley
[0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
v4: Fix the description of peer-hub and update the commit message.
Schematics of the Odroid N2+
https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
V3: fix the dt_binding_check error, added new example for Genesys GL3523
v2: added Genesys GL3523 binding
v1: none
---
.../bindings/usb/genesys,gl850g.yaml | 65 +++++++++++++++++--
1 file changed, 61 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
index ee08b9c3721f..499192ea4074 100644
--- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
+++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
@@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
maintainers:
- Icenowy Zheng <uwu at icenowy.me>
-allOf:
- - $ref: usb-device.yaml#
-
properties:
compatible:
enum:
@@ -27,12 +24,46 @@ properties:
vdd-supply:
description:
- the regulator that provides 3.3V core power to the hub.
+ phandle to the regulator that provides power to the hub.
+
+ peer-hub:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ For onboard hub controllers that support USB 3.x and USB 2.0 hubs
+ with shared resets and power supplies, this property is used to identify
+ the hubs with which these are shared.
required:
- compatible
- reg
+allOf:
+ - $ref: usb-device.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - usb5e3,608
+ then:
+ properties:
+ peer-hub: false
+ vdd-supply: false
+ reset-gpios: true
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - usb5e3,610
+ - usb5e3,620
+ then:
+ properties:
+ peer-hub: true
+ vdd-supply: true
+ reset-gpios: true
+
additionalProperties: false
examples:
@@ -49,3 +80,29 @@ examples:
reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
};
};
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ usb {
+ dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub at 1 {
+ compatible = "usb5e3,610";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc_5v>;
+ };
+
+ /* 3.1 hub on port 4 */
+ hub_3_0: hub at 2 {
+ compatible = "usb5e3,620";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc_5v>;
+ };
+ };
--
2.42.0
More information about the linux-amlogic
mailing list