[PATCH v3 4/4] pwm: meson: add generic compatible for meson8 to sm1
Jerome Brunet
jbrunet at baylibre.com
Wed Nov 29 05:40:00 PST 2023
Introduce a new compatible support in the Amlogic PWM driver.
The PWM HW is actually the same for all SoCs supported so far.
A specific compatible is needed only because the clock sources
of the PWMs are hard-coded in the driver.
It is better to have the clock source described in DT but this
changes the bindings so a new compatible must be introduced.
When all supported platform have migrated to the new compatible,
support for the legacy ones may be removed from the driver.
Adding a callback to setup the clock will also make it easier
to add support for the new PWM HW found in a1, s4, c3 and t7 SoC
families.
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
drivers/pwm/pwm-meson.c | 224 ++++++++++++++++++++++++----------------
1 file changed, 133 insertions(+), 91 deletions(-)
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 5cbd65cae28a..d5d745a651d3 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -95,6 +95,7 @@ struct meson_pwm_channel {
struct meson_pwm_data {
const char * const *parent_names;
+ int (*channels_init)(struct device *dev);
};
struct meson_pwm {
@@ -333,95 +334,6 @@ static const struct pwm_ops meson_pwm_ops = {
.get_state = meson_pwm_get_state,
};
-static const char * const pwm_meson8b_parent_names[] = {
- "xtal", NULL, "fclk_div4", "fclk_div3"
-};
-
-static const struct meson_pwm_data pwm_meson8b_data = {
- .parent_names = pwm_meson8b_parent_names,
-};
-
-/*
- * Only the 2 first inputs of the GXBB AO PWMs are valid
- * The last 2 are grounded
- */
-static const char * const pwm_gxbb_ao_parent_names[] = {
- "xtal", "clk81", NULL, NULL,
-};
-
-static const struct meson_pwm_data pwm_gxbb_ao_data = {
- .parent_names = pwm_gxbb_ao_parent_names,
-};
-
-static const char * const pwm_axg_ee_parent_names[] = {
- "xtal", "fclk_div5", "fclk_div4", "fclk_div3"
-};
-
-static const struct meson_pwm_data pwm_axg_ee_data = {
- .parent_names = pwm_axg_ee_parent_names,
-};
-
-static const char * const pwm_axg_ao_parent_names[] = {
- "xtal", "axg_ao_clk81", "fclk_div4", "fclk_div5"
-};
-
-static const struct meson_pwm_data pwm_axg_ao_data = {
- .parent_names = pwm_axg_ao_parent_names,
-};
-
-static const char * const pwm_g12a_ao_ab_parent_names[] = {
- "xtal", "g12a_ao_clk81", "fclk_div4", "fclk_div5"
-};
-
-static const struct meson_pwm_data pwm_g12a_ao_ab_data = {
- .parent_names = pwm_g12a_ao_ab_parent_names,
-};
-
-static const char * const pwm_g12a_ao_cd_parent_names[] = {
- "xtal", "g12a_ao_clk81", NULL, NULL,
-};
-
-static const struct meson_pwm_data pwm_g12a_ao_cd_data = {
- .parent_names = pwm_g12a_ao_cd_parent_names,
-};
-
-static const struct of_device_id meson_pwm_matches[] = {
- {
- .compatible = "amlogic,meson8b-pwm",
- .data = &pwm_meson8b_data
- },
- {
- .compatible = "amlogic,meson-gxbb-pwm",
- .data = &pwm_meson8b_data
- },
- {
- .compatible = "amlogic,meson-gxbb-ao-pwm",
- .data = &pwm_gxbb_ao_data
- },
- {
- .compatible = "amlogic,meson-axg-ee-pwm",
- .data = &pwm_axg_ee_data
- },
- {
- .compatible = "amlogic,meson-axg-ao-pwm",
- .data = &pwm_axg_ao_data
- },
- {
- .compatible = "amlogic,meson-g12a-ee-pwm",
- .data = &pwm_meson8b_data
- },
- {
- .compatible = "amlogic,meson-g12a-ao-pwm-ab",
- .data = &pwm_g12a_ao_ab_data
- },
- {
- .compatible = "amlogic,meson-g12a-ao-pwm-cd",
- .data = &pwm_g12a_ao_cd_data
- },
- {},
-};
-MODULE_DEVICE_TABLE(of, meson_pwm_matches);
-
static int meson_pwm_init_clocks_legacy(struct device *dev,
struct clk_parent_data *mux_parent_data)
{
@@ -528,12 +440,15 @@ static int meson_pwm_init_clocks_legacy(struct device *dev,
return 0;
}
-static int meson_pwm_init_channels(struct device *dev)
+static int meson_pwm_init_channels_legacy(struct device *dev)
{
struct clk_parent_data mux_parent_data[MESON_NUM_MUX_PARENTS] = {};
struct meson_pwm *meson = dev_get_drvdata(dev);
int i;
+ dev_info(dev, "using obsolete compatible, please consider updating dt\n");
+
+
for (i = 0; i < MESON_NUM_MUX_PARENTS; i++) {
mux_parent_data[i].index = -1;
mux_parent_data[i].name = meson->data->parent_names[i];
@@ -542,6 +457,133 @@ static int meson_pwm_init_channels(struct device *dev)
return meson_pwm_init_clocks_legacy(dev, mux_parent_data);
}
+static int meson_pwm_init_channels_meson8b_v2(struct device *dev)
+{
+ struct clk_parent_data mux_parent_data[MESON_NUM_MUX_PARENTS] = {};
+ int i;
+
+ /*
+ * NOTE: Instead of relying on the hard coded names in the driver
+ * as the legacy version, this relies on DT to provide the list of
+ * clocks.
+ * For once, using input numbers actually makes more sense than names.
+ * Also DT requires clock-names to be explicitly ordered, so there is
+ * no point bothering with clock names in this case.
+ */
+ for (i = 0; i < MESON_NUM_MUX_PARENTS; i++)
+ mux_parent_data[i].index = i;
+
+ return meson_pwm_init_clocks_legacy(dev, mux_parent_data);
+}
+
+static const char * const pwm_meson8b_parent_names[] = {
+ "xtal", NULL, "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_meson8b_data = {
+ .parent_names = pwm_meson8b_parent_names,
+ .channels_init = meson_pwm_init_channels_legacy,
+};
+
+/*
+ * Only the 2 first inputs of the GXBB AO PWMs are valid
+ * The last 2 are grounded
+ */
+static const char * const pwm_gxbb_ao_parent_names[] = {
+ "xtal", "clk81", NULL, NULL,
+};
+
+static const struct meson_pwm_data pwm_gxbb_ao_data = {
+ .parent_names = pwm_gxbb_ao_parent_names,
+ .channels_init = meson_pwm_init_channels_legacy,
+};
+
+static const char * const pwm_axg_ee_parent_names[] = {
+ "xtal", "fclk_div5", "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_axg_ee_data = {
+ .parent_names = pwm_axg_ee_parent_names,
+ .channels_init = meson_pwm_init_channels_legacy,
+};
+
+static const char * const pwm_axg_ao_parent_names[] = {
+ "xtal", "axg_ao_clk81", "fclk_div4", "fclk_div5"
+};
+
+static const struct meson_pwm_data pwm_axg_ao_data = {
+ .parent_names = pwm_axg_ao_parent_names,
+ .channels_init = meson_pwm_init_channels_legacy,
+};
+
+static const char * const pwm_g12a_ao_ab_parent_names[] = {
+ "xtal", "g12a_ao_clk81", "fclk_div4", "fclk_div5"
+};
+
+static const struct meson_pwm_data pwm_g12a_ao_ab_data = {
+ .parent_names = pwm_g12a_ao_ab_parent_names,
+ .channels_init = meson_pwm_init_channels_legacy,
+};
+
+static const char * const pwm_g12a_ao_cd_parent_names[] = {
+ "xtal", "g12a_ao_clk81", NULL, NULL,
+};
+
+static const struct meson_pwm_data pwm_g12a_ao_cd_data = {
+ .parent_names = pwm_g12a_ao_cd_parent_names,
+ .channels_init = meson_pwm_init_channels_legacy,
+};
+
+static const struct meson_pwm_data pwm_meson8_v2_data = {
+ .channels_init = meson_pwm_init_channels_meson8b_v2,
+};
+
+static const struct of_device_id meson_pwm_matches[] = {
+ {
+ .compatible = "amlogic,meson8-pwm-v2",
+ .data = &pwm_meson8_v2_data
+ },
+ /*
+ * The following compatibles are obsolete.
+ * Support for these may be removed once the related
+ * platforms have been updated
+ */
+ {
+ .compatible = "amlogic,meson8b-pwm",
+ .data = &pwm_meson8b_data
+ },
+ {
+ .compatible = "amlogic,meson-gxbb-pwm",
+ .data = &pwm_meson8b_data
+ },
+ {
+ .compatible = "amlogic,meson-gxbb-ao-pwm",
+ .data = &pwm_gxbb_ao_data
+ },
+ {
+ .compatible = "amlogic,meson-axg-ee-pwm",
+ .data = &pwm_axg_ee_data
+ },
+ {
+ .compatible = "amlogic,meson-axg-ao-pwm",
+ .data = &pwm_axg_ao_data
+ },
+ {
+ .compatible = "amlogic,meson-g12a-ee-pwm",
+ .data = &pwm_meson8b_data
+ },
+ {
+ .compatible = "amlogic,meson-g12a-ao-pwm-ab",
+ .data = &pwm_g12a_ao_ab_data
+ },
+ {
+ .compatible = "amlogic,meson-g12a-ao-pwm-cd",
+ .data = &pwm_g12a_ao_cd_data
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, meson_pwm_matches);
+
static int meson_pwm_probe(struct platform_device *pdev)
{
struct meson_pwm *meson;
@@ -573,7 +615,7 @@ static int meson_pwm_probe(struct platform_device *pdev)
return -ENODEV;
}
- err = meson_pwm_init_channels(&pdev->dev);
+ err = meson->data->channels_init(&pdev->dev);
if (err < 0)
return err;
--
2.42.0
More information about the linux-amlogic
mailing list