[PATCH v9 04/12] dt-bindings: phy: amlogic,g12a-mipi-dphy-analog: drop unneeded reg property and example
Neil Armstrong
neil.armstrong at linaro.org
Fri Nov 24 05:50:58 PST 2023
Hi Conor,
On 24/11/2023 13:36, Conor Dooley wrote:
> On Fri, Nov 24, 2023 at 09:41:15AM +0100, Neil Armstrong wrote:
>> The amlogic,g12a-mipi-dphy-analog is a feature of the simple-mfd
>> amlogic,meson-axg-hhi-sysctrl system control register zone which is an
>> intermixed registers zone, thus it's very hard to define clear ranges for
>> each SoC controlled features even if possible.
>>
>> The amlogic,g12a-mipi-dphy-analog was wrongly documented as an independent
>> register range, which is not the reality, thus fix the bindings by dropping
>> the reg property now it's referred from amlogic,meson-gx-hhi-sysctrl.yaml
>> and documented as a subnode of amlogic,meson-axg-hhi-sysctrl.
>>
>> Also drop the unnecessary example, the top level bindings example should
>> be enough.
>>
>> Fixes: 76ab79f9726c ("dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings")
>> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
>
> I feel like I left a tag on this one before, but I can't remember.
> Perhaps I missed the conclusion to the discussion to the discussion with
> Rob about whether having "reg" was desirable that lead to a tag being
> dropped?
I checked again and nope, not tag, but Rob's question was legitimate and I reworded
and clarified the commit message following your reviews.
On the other side you suggested a Fixes tag, which I added.
The rewording is about why reg doesn't make sense on the nature of the memory
region and it doesn't make sense here like other similar nodes.
Neil
>
>> ---
>> .../bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml | 12 ------------
>> 1 file changed, 12 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
>> index c8c83acfb871..81c2654b7e57 100644
>> --- a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
>> +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
>> @@ -16,20 +16,8 @@ properties:
>> "#phy-cells":
>> const: 0
>>
>> - reg:
>> - maxItems: 1
>> -
>> required:
>> - compatible
>> - - reg
>> - "#phy-cells"
>>
>> additionalProperties: false
>> -
>> -examples:
>> - - |
>> - phy at 0 {
>> - compatible = "amlogic,g12a-mipi-dphy-analog";
>> - reg = <0x0 0xc>;
>> - #phy-cells = <0>;
>> - };
>>
>> --
>> 2.34.1
>>
More information about the linux-amlogic
mailing list