[PATCH 2/2] arm64: dts: amlogic: minor whitespace cleanup around '='

[Krzysztof Kozlowski]

The DTS code coding style expects exactly one space before and after '='
sign.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 .../boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts    | 2 +-
 arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi        | 2 +-
 arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi            | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
index 0062667c4f65..c9e84db0831a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
@@ -30,7 +30,7 @@ &sd_emmc_b {
 &uart_B {
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
index 995ce10d5c81..08c33ec7e9f1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -369,7 +369,7 @@ &uart_A {
 
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
index 0a6a12808568..4b8db872bbf3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -487,7 +487,7 @@ &uart_A {
 
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
 	};
-- 
2.34.1