[PATCH v8 02/12] dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: add example covering meson-axg-hhi-sysctrl

Neil Armstrong neil.armstrong at linaro.org
Tue Nov 14 06:06:13 PST 2023


On 10/11/2023 21:12, Rob Herring wrote:
> On Thu, Nov 09, 2023 at 10:00:03AM +0100, Neil Armstrong wrote:
>> Add a thirst example covering the meson-axg-hhi-sysctrl variant and more
>> importantly the phy subnode.
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
>> ---
>>   .../soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml  | 41 ++++++++++++++++++++++
>>   1 file changed, 41 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
>> index 16977e4e4357..2edf4ccea845 100644
>> --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
>> +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
>> @@ -158,3 +158,44 @@ examples:
>>               };
>>           };
>>       };
>> +
> 
> New example should be separate starting with a '-|'.
> 
>> +    bus at ff63c000 {
>> +        compatible = "simple-bus";
>> +        reg = <0xff63c000 0x1c00>;
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +        ranges = <0x0 0xff63c000 0x1c00>;
> 
> Why do you need all this? 1 cell is the default for examples.

Bad copy-pasta from previous examples, I'll fix all that and separate examples with '-|'

> 
>> +
>> +        system-controller at 0 {
>> +            compatible = "amlogic,meson-axg-hhi-sysctrl", "simple-mfd", "syscon";
>> +            reg = <0 0x400>;
>> +
>> +            clock-controller {
>> +                compatible = "amlogic,axg-clkc";
>> +                #clock-cells = <1>;
>> +                clocks = <&xtal>;
>> +                clock-names = "xtal";
>> +            };
>> +
>> +            power-controller {
>> +                compatible = "amlogic,meson-axg-pwrc";
>> +                #power-domain-cells = <1>;
>> +                amlogic,ao-sysctrl = <&sysctrl_AO>;
>> +
>> +                resets = <&reset_viu>,
>> +                         <&reset_venc>,
>> +                         <&reset_vcbus>,
>> +                         <&reset_vencl>,
>> +                         <&reset_vid_lock>;
>> +                reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock";
>> +                clocks = <&clk_vpu>, <&clk_vapb>;
>> +                clock-names = "vpu", "vapb";
>> +            };
>> +
>> +            phy {
>> +                compatible = "amlogic,axg-mipi-pcie-analog-phy";
>> +                #phy-cells = <0>;
>> +                status = "disabled";
> 
> Examples should not be disabled.

Err, thx I 'll fix this

> 
>> +            };
>> +        };
>> +    };
>>
>> -- 
>> 2.34.1
>>




More information about the linux-amlogic mailing list