[PATCH 2/6] dt-bindings: pwm: amlogic: add new compatible for meson8 pwm type

[Rob Herring]

On Mon, Nov 06, 2023 at 11:32:49AM +0100, Jerome Brunet wrote:
> Add a new compatible for the pwm found in the meson8 to sm1 Amlogic SoCs.
> 
> The previous clock bindings for these SoCs described the driver and not the
> HW itself. The clock provided was used to set the parent of the input clock
> mux among the possible parents hard-coded in the driver.
> 
> The new bindings allows to describe the actual clock inputs of the PWM in
> DT, like most bindings do, instead of relying of hard-coded data.
> 
> The new bindings make the old one deprecated.
> 
> There is enough experience on this HW to know that the PWM is exactly the
> same all the supported SoCs. There is no need for a per-SoC compatible.
> 
> Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
> ---
>  .../devicetree/bindings/pwm/pwm-amlogic.yaml  | 35 +++++++++++++++++--
>  1 file changed, 33 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
> index 754b70fc2db0..3aa522c4cae4 100644
> --- a/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
> +++ b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
> @@ -22,6 +22,7 @@ properties:
>            - amlogic,meson-g12a-ao-pwm-ab
>            - amlogic,meson-g12a-ao-pwm-cd
>            - amlogic,meson-s4-pwm
> +          - amlogic,meson8-pwm-v2
>        - items:
>            - const: amlogic,meson-gx-pwm
>            - const: amlogic,meson-gxbb-pwm
> @@ -37,7 +38,7 @@ properties:
>  
>    clocks:
>      minItems: 1
> -    maxItems: 2
> +    maxItems: 4
>  
>    clock-names:
>      minItems: 1
> @@ -70,11 +71,14 @@ allOf:
>                - amlogic,meson-gx-pwm
>                - amlogic,meson-gx-ao-pwm
>      then:
> -      # Historic bindings tied to the driver implementation
> +      # Obsolete historic bindings tied to the driver implementation
>        # The clocks provided here are meant to be matched with the input
>        # known (hard-coded) in the driver and used to select pwm clock
>        # source. Currently, the linux driver ignores this.
> +      deprecated: true
>        properties:
> +        clocks:
> +          maxItems: 2
>          clock-names:
>            oneOf:
>              - items:
> @@ -83,6 +87,26 @@ allOf:
>                  - const: clkin0
>                  - const: clkin1
>  
> +  # Newer binding where clock describe the actual clock inputs of the pwm
> +  # block. These are necessary but some inputs may be grounded.
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - amlogic,meson8b-pwm-v2
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 1
> +          items:
> +            - description: input clock 0 of the pwm block
> +            - description: input clock 1 of the pwm block
> +            - description: input clock 2 of the pwm block
> +            - description: input clock 3 of the pwm block
> +      required:
> +        - clocks

Again, clock-names?