[PATCH v1] meson saradc: fix clock divider mask length

[Dmitry Rokosov]

Hello Martin,

On Tue, May 16, 2023 at 09:08:26PM +0200, Martin Blumenstingl wrote:
> Hi George,
> 
> thank you for this patch!
> 
> On Mon, May 15, 2023 at 11:06 PM George Stark <gnstark at sberdevices.ru> wrote:
> >
> > From: George Stark <GNStark at sberdevices.ru>
> >
> > According to datasheets of supported meson SOCs
> > length of ADC_CLK_DIV field is 6 bits long
> I have a question about this sentence which doesn't affect this patch
> - it's only about managing expectations:
> Which SoC are you referring to?
> This divider is only relevant on older SoCs that predate GXBB (S905).
> To my knowledge all SoCs from GXBB onwards place the divider in the
> main or AO clock controller, so this bitmask is irrelevant there.
> 

We are currently working with the A1 SoC family, specifically the A113L
variant. According to the datasheet for the A113L, the ADC_CLK_DIV can
be found in the SAR_ADC_REG3 register as a 6-bit value located within
bits 15 through 10.

> > Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs")
> > Signed-off-by: George Stark <GNStark at sberdevices.ru>
> Since my question above doesn't affect this patch:
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>

-- 
Thank you,
Dmitry