[PATCH v11 3/5] dt-bindings: clock: meson: add A1 PLL and Peripherals clkcs bindings

[Jerome Brunet]

On Mon 27 Mar 2023 at 15:41, Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> wrote:

> On 27/03/2023 13:39, Jerome Brunet wrote:
>> 
>> On Mon 27 Mar 2023 at 13:51, Dmitry Rokosov <ddrokosov at sberdevices.ru> wrote:
>> 
>>> On Mon, Mar 27, 2023 at 11:51:21AM +0200, Jerome Brunet wrote:
>>>>
>>>> On Tue 21 Mar 2023 at 22:30, Dmitry Rokosov <ddrokosov at sberdevices.ru> wrote:
>>>>
>>>>> Add the documentation for Amlogic A1 PLL and Amlogic A1 Peripherals
>>>>> clock drivers.
>>>>> Introduce Amlogic A1 PLL and Amlogic A1 Peripherals device tree
>>>>> bindings and include them to MAINTAINERS.
>>>>>
>>>>> Signed-off-by: Jian Hu <jian.hu at amlogic.com>
>>>>> Signed-off-by: Dmitry Rokosov <ddrokosov at sberdevices.ru>
>>>>> ---
>>>>>  .../bindings/clock/amlogic,a1-clkc.yaml       |  73 +++++++++++
>>>>>  .../bindings/clock/amlogic,a1-pll-clkc.yaml   |  59 +++++++++
>>>>>  MAINTAINERS                                   |   1 +
>>>>>  include/dt-bindings/clock/amlogic,a1-clkc.h   | 113 ++++++++++++++++++
>>>>>  .../dt-bindings/clock/amlogic,a1-pll-clkc.h   |  21 ++++
>>>>>  5 files changed, 267 insertions(+)
>>>>>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
>>>>>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>>>>
>>>> There is two drivers (and 2 independent patches). There should be 2
>>>> bindings patches as well.
>>>>
>>>
>>> Before, in previous versions I had two versions, but it wasn't bisectable
>>> approach.
>> 
>> You are confusing bisectable and Rob's robot. Splitting patches is more
>> that likely to help bisect (and patches backport) - not the other way around.
>
> No, he did not confuse. Splitting patches makes the series
> non-bisectable which was visible in the past.
>
> What's more, there is no reason to have bindings patches split just
> because you split drivers. Bindings are independent of drivers - we
> write them for hardware description.

Patches should do one thing, my comment is a simple application of that.

There no reason to have a single patch provide the bindings for 2
independent pieces of HW, which those components are. If a dependency
has been set, it is one that should not be there.

They do provide inputs to one another, yes but remain independent pieces of
HW. They have a different address space and as a consequences, different
drivers

If we were being strict, it should even be seperate series.

>
>> 
>>> a1-clkc schema depends on a1-pll-clkc headers and vice versa.
>>> It means dt schemas checkers will show us failure if we split them into two
>>> patchsets.
>> 
>> Only because you are patches are not upstream yet ...
>> 
>>> I know, that we can use raw digits instead of CLKID names, but IMO it doesn't
>>> look like production schema and it requires one more patchset above the
>>> series with proper CLKID definitons usage and proper header including.
>>>
>>> BTW, there is an example of Rob's test bot failure found in the previous
>>> v10 patch series due to chicken or the egg problem.
>>> https://lore.kernel.org/all/167769997208.7087.5344356236212731922.robh@kernel.org/
>>>
>>> Please advise what's the best practice to resolve that..
>> 
>> Don't use the header in your example would solve the problem and
>> still be correct DT wise.
>> 
>> The examples are just examples, they are not required to actually
>> matches a real HW, as far as I know.
>
> Yes, that would work... or just keep them here.
>
>
> Best regards,
> Krzysztof
>
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic