[PATCH 30/33] doc: boards: amlogic: add documentation for BananaPi CM4IO

[Christian Hewitt]

> On 20 Mar 2023, at 4:13 pm, Neil Armstrong <neil.armstrong at linaro.org> wrote:
> 
> On 20/03/2023 12:46, Christian Hewitt wrote:
>> Add build instructions for the BananaPi BPI-CM4IO carrier board with
>> BPI-CM4 module.
>> Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
>> ---
>>  board/amlogic/u200/MAINTAINERS       |   1 -
>>  board/amlogic/w400/MAINTAINERS       |   2 +
>>  doc/board/amlogic/bananapi-cm4io.rst | 152 +++++++++++++++++++++++++++
>>  doc/board/amlogic/index.rst          |   1 +
>>  4 files changed, 155 insertions(+), 1 deletion(-)
>>  create mode 100644 doc/board/amlogic/bananapi-cm4io.rst
> 
> <snip>
> 
>> +
>> +U-Boot Signing with Pre-Built FIP repo
>> +--------------------------------------
>> +
>> +.. code-block:: bash
>> +    $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
>> +    $ cd amlogic-boot-fip
>> +    $ mkdir my-output-dir
>> +    $ ./build-fip.sh bananapi-cm4io /path/to/u-boot/u-boot.bin my-output-dir
> 
> 
> This should be bananapi-m2s since the same is used, or we should duplicate it for cm4io/cm4.

https://github.com/LibreELEC/amlogic-boot-fip/tree/master/bananapi-cm4io

^ It’s the same FIPs that were submitted for M2S but for packaging
reasons I cloned them (users struggle to find images not explicitly
named for their board). I’ll submit patches for the M2S and M2-Pro
boards once this series is accepted (hopefully).

Christian