[PATCH v5] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding

[Rob Herring]

On Wed, 15 Mar 2023 22:23:57 +0100, Heiner Kallweit wrote:
> Convert Amlogic Meson pin controller binding to yaml.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
> ---
> v2:
> - consider that more than one compatible can be set
> - remove bus part from example
> v3:
> - remove minItem/maxItem properties for compatible
> v4:
> - split patch to be able to deal with the different reg/reg-names
> v5:
> - remove compatible definition from common yaml
> - move pincfg-node and pinmux-node definition to meson-gpio object definition
> ---
>  .../pinctrl/amlogic,meson-pinctrl-a1.yaml     | 63 +++++++++++++
>  .../pinctrl/amlogic,meson-pinctrl-common.yaml | 52 ++++++++++
>  .../amlogic,meson-pinctrl-g12a-aobus.yaml     | 64 +++++++++++++
>  .../amlogic,meson-pinctrl-g12a-periphs.yaml   | 68 ++++++++++++++
>  .../pinctrl/amlogic,meson8-pinctrl-aobus.yaml | 72 ++++++++++++++
>  .../pinctrl/amlogic,meson8-pinctrl-cbus.yaml  | 74 +++++++++++++++
>  .../bindings/pinctrl/meson,pinctrl.txt        | 94 -------------------
>  7 files changed, 393 insertions(+), 94 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml: 'unevaluedProperties' is not one of ['$id', '$schema', 'title', 'description', 'examples', 'required', 'allOf', 'anyOf', 'oneOf', 'definitions', '$defs', 'additionalProperties', 'dependencies', 'dependentRequired', 'dependentSchemas', 'patternProperties', 'properties', 'if', 'then', 'else', 'unevaluatedProperties', 'deprecated', 'maintainers', 'select', '$ref']
	from schema $id: http://devicetree.org/meta-schemas/base.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml: 'oneOf' conditional failed, one must be fixed:
	'unevaluatedProperties' is a required property
	'additionalProperties' is a required property
	hint: Either unevaluatedProperties or additionalProperties must be present
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/2c2fa53f-ff8d-6b7d-3037-4d11a9fb82df@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.