[PATCH V2] nvmem: add explicit config option to read OF fixed cells

Miquel Raynal miquel.raynal at bootlin.com
Wed Mar 8 10:06:36 PST 2023


Hi Rafał,

rafal at milecki.pl wrote on Wed, 08 Mar 2023 17:55:46 +0100:

> On 2023-03-08 17:34, Miquel Raynal wrote:
> > Hi Rafał,
> > 
> > zajec5 at gmail.com wrote on Fri, 24 Feb 2023 08:29:03 +0100:
> >   
> >> From: Rafał Miłecki <rafal at milecki.pl>  
> >> >> NVMEM subsystem looks for fixed NVMEM cells (specified in DT) by  
> >> default. This behaviour made sense in early days before adding support
> >> for dynamic cells.  
> >> >> With every new supported NVMEM device with dynamic cells current  
> >> behaviour becomes non-optimal. It results in unneeded iterating over >> DT
> >> nodes and may result in false discovery of cells (depending on used DT
> >> properties).  
> >> >> This behaviour has actually caused a problem already with the MTD  
> >> subsystem. MTD subpartitions were incorrectly treated as NVMEM cells.  
> > 
> > That's true, but I expect this to be really MTD specific.
> > 
> > A concrete proposal below.
> >   
> >> Also with upcoming support for NVMEM layouts no new binding or driver
> >> should support fixed cells defined in device node.  
> > 
> > I'm not sure I agree with this statement. We are not preventing new
> > binding/driver to use fixed cells, or...? We offer a new way to expose
> > nvmem cells with another way than "fixed-offset" and "fixed-size" OF
> > nodes.  
> 
>  From what I understood all new NVMEM bindings should have cells defined
> in the nvmem-layout { } node. That's what I mean by saying they should
> not be defined in device node (but its "nvmem-layout" instead).

Layouts are just another possibility, either you user the nvmem-cells
compatible and produce nvmem cells with fixed OF nodes, or you use the
nvmem-layout container. I don't think all new bindings should have
cells in layouts. It depends if the content is static or not.

> >> Solve this by modifying drivers for bindings that support specifying
> >> fixed NVMEM cells in DT. Make them explicitly tell NVMEM subsystem to
> >> read cells from DT.  
> >> >> It wasn't clear (to me) if rtc and w1 code actually uses fixed cells. >> I  
> >> enabled them to don't risk any breakage.  
> >> >> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>  
> >> [for drivers/nvmem/meson-{efuse,mx-efuse}.c]
> >> Acked-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> >> ---
> >> V2: Fix stm32-romem.c typo breaking its compilation
> >>     Pick Martin's Acked-by
> >>     Add paragraph about layouts deprecating use_fixed_of_cells
> >> ---
> >>  drivers/mtd/mtdcore.c          | 2 ++
> >>  drivers/nvmem/apple-efuses.c   | 1 +
> >>  drivers/nvmem/core.c           | 8 +++++---
> >>  drivers/nvmem/imx-ocotp-scu.c  | 1 +
> >>  drivers/nvmem/imx-ocotp.c      | 1 +
> >>  drivers/nvmem/meson-efuse.c    | 1 +
> >>  drivers/nvmem/meson-mx-efuse.c | 1 +
> >>  drivers/nvmem/microchip-otpc.c | 1 +
> >>  drivers/nvmem/mtk-efuse.c      | 1 +
> >>  drivers/nvmem/qcom-spmi-sdam.c | 1 +
> >>  drivers/nvmem/qfprom.c         | 1 +
> >>  drivers/nvmem/rave-sp-eeprom.c | 1 +
> >>  drivers/nvmem/rockchip-efuse.c | 1 +
> >>  drivers/nvmem/sc27xx-efuse.c   | 1 +
> >>  drivers/nvmem/sprd-efuse.c     | 1 +
> >>  drivers/nvmem/stm32-romem.c    | 1 +
> >>  drivers/nvmem/sunplus-ocotp.c  | 1 +
> >>  drivers/nvmem/sunxi_sid.c      | 1 +
> >>  drivers/nvmem/uniphier-efuse.c | 1 +
> >>  drivers/nvmem/zynqmp_nvmem.c   | 1 +
> >>  drivers/rtc/nvmem.c            | 1 +
> >>  drivers/w1/slaves/w1_ds250x.c  | 1 +
> >>  include/linux/nvmem-provider.h | 2 ++
> >>  23 files changed, 29 insertions(+), 3 deletions(-)  
> >> >> diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c  
> >> index 0feacb9fbdac..1bb479c0f758 100644
> >> --- a/drivers/mtd/mtdcore.c
> >> +++ b/drivers/mtd/mtdcore.c
> >> @@ -523,6 +523,7 @@ static int mtd_nvmem_add(struct mtd_info *mtd)
> >>  	config.dev = &mtd->dev;
> >>  	config.name = dev_name(&mtd->dev);
> >>  	config.owner = THIS_MODULE;
> >> +	config.use_fixed_of_cells = of_device_is_compatible(node, >> "nvmem-cells");  
> > 
> > I am wondering how mtd specific this is? For me all OF nodes containing
> > the nvmem-cells compatible should be treated as cells providers and
> > populate nvmem cells as for each children.
> > 
> > Why don't we just check for this compatible to be present? in
> > nvmem_add_cells_from_of() ? And if not we just skip the operation.
> > 
> > This way we still follow the bindings (even though using nvmem-cells in
> > the compatible property to require cells population was a mistake in
> > the first place, as discussed in the devlink thread recently) but there
> > is no need for a per-driver config option?  
> 
> This isn't mtd specific. Please check this patch for all occurrences of
> the:
> use_fixed_of_cells = true
> 
> The very first one: drivers/nvmem/apple-efuses.c driver for the
> "apple,efuses" binding. That binding supports fixed OF cells, see:
> Documentation/devicetree/bindings/nvmem/apple,efuses.yaml

I'm saying: based on what has been enforced so far, I would expect all
fixed cell providers to come with nvmem-cells as compatible, no?

If that's the case we could use that as a common denominator?

> 
> 
> >>  	config.reg_read = mtd_nvmem_reg_read;
> >>  	config.size = mtd->size;
> >>  	config.word_size = 1;
> >> @@ -891,6 +892,7 @@ static struct nvmem_device >> *mtd_otp_nvmem_register(struct mtd_info *mtd,
> >>  	config.name = kasprintf(GFP_KERNEL, "%s-%s", dev_name(&mtd->dev), >> compatible);
> >>  	config.id = NVMEM_DEVID_NONE;
> >>  	config.owner = THIS_MODULE;
> >> +	config.use_fixed_of_cells = true;
> >>  	config.type = NVMEM_TYPE_OTP;
> >>  	config.root_only = true;
> >>  	config.ignore_wp = true;
> >> diff --git a/drivers/nvmem/apple-efuses.c >> b/drivers/nvmem/apple-efuses.c
> >> index 9b7c87102104..0119bac43b2c 100644
> >> --- a/drivers/nvmem/apple-efuses.c
> >> +++ b/drivers/nvmem/apple-efuses.c
> >> @@ -36,6 +36,7 @@ static int apple_efuses_probe(struct platform_device >> *pdev)
> >>  	struct resource *res;
> >>  	struct nvmem_config config = {
> >>  		.dev = &pdev->dev,
> >> +		.use_fixed_of_cells = true,
> >>  		.read_only = true,
> >>  		.reg_read = apple_efuses_read,
> >>  		.stride = sizeof(u32),
> >> diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
> >> index 174ef3574e07..6783cd8478d7 100644
> >> --- a/drivers/nvmem/core.c
> >> +++ b/drivers/nvmem/core.c
> >> @@ -844,9 +844,11 @@ struct nvmem_device *nvmem_register(const struct >> nvmem_config *config)
> >>  	if (rval)
> >>  		goto err_remove_cells;  
> >> >> -	rval = nvmem_add_cells_from_of(nvmem);  
> >> -	if (rval)
> >> -		goto err_remove_cells;
> >> +	if (config->use_fixed_of_cells) {
> >> +		rval = nvmem_add_cells_from_of(nvmem);
> >> +		if (rval)
> >> +			goto err_remove_cells;
> >> +	}  
> >> >>  	dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
> >> > > Thanks,  
> > Miquèl  


Thanks,
Miquèl



More information about the linux-amlogic mailing list