[PATCH 0/2] arm64: amlogic: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard

Neil Armstrong neil.armstrong at linaro.org
Fri Mar 3 09:37:56 PST 2023


Add support for both the BananaPi BPI-CM4 module and the BananaPi
baseboard which is comnpatible with the RaspberryPi CM4IO baseboard.
                                                                                            
The BananaPi BPI-CM4 module follows the CM4 specifications at [1],
but with a single HDMI port and a since DSI output.

The current CM4IO baseboard DT should work fine on the Raspberry CM4
baseboard and other derivatives baseboards, but proper DT should
be written for other baseboards.

The split is done so it's easy to describe a new CM4 baseboard, enabling
only the necessary HW used on the baseboard.

[1] https://datasheets.raspberrypi.com/cm4io/cm4io-datasheet.pdf

Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
Neil Armstrong (2):
      dt-bindings: arm: amlogic: Document the boards with the BPI-CM4 connected
      arm64: dts: amlogic: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard

 Documentation/devicetree/bindings/arm/amlogic.yaml |   8 +
 arch/arm64/boot/dts/amlogic/Makefile               |   1 +
 .../dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts  | 165 +++++++++
 .../boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi  | 388 +++++++++++++++++++++
 4 files changed, 562 insertions(+)
---
base-commit: 38d2b86a665b5e86371a1a30228bce259aa6c101
change-id: 20230303-topic-amlogic-upstream-bpi-cm4-92e0562f8950

Best regards,
-- 
Neil Armstrong <neil.armstrong at linaro.org>




More information about the linux-amlogic mailing list