[PATCH v7 4/4] arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree
Lucas Tanure
tanure at linux.com
Thu Jun 29 00:34:19 PDT 2023
The Khadas VIM4 uses the Amlogic A311D2 SoC, based on the Amlogic T7 SoC
family, on a board with the same form factor as the VIM3 models.
- 8GB LPDDR4X 2016MHz
- 32GB eMMC 5.1 storage
- 32MB SPI flash
- 10/100/1000 Base-T Ethernet
- AP6275S Wireless (802.11 a/b/g/n/ac/ax, BT5.1)
- HDMI 2.1 video
- HDMI Input
- 1x USB 2.0 + 1x USB 3.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 3x LED's (1x red, 1x blue, 1x white)
- 3x buttons (power, function, reset)
- M2 socket with PCIe, USB, ADC & I2C
- 40pin GPIO Header
- 1x micro SD card slot
Signed-off-by: Lucas Tanure <tanure at linux.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../amlogic/amlogic-t7-a311d2-khadas-vim4.dts | 54 ++++++
arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 155 ++++++++++++++++++
3 files changed, 210 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index cd1c5b04890a..166fec1e4229 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
new file mode 100644
index 000000000000..fffdab96b12e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Wesion, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-t7.dtsi"
+
+/ {
+ model = "Khadas vim4";
+ compatible = "khadas,vim4", "amlogic,a311d2", "amlogic,t7";
+
+ aliases {
+ serial0 = &uart_a;
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x2 0x0>; /* 8 GB */
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved: secmon at 5000000 {
+ reg = <0x0 0x05000000 0x0 0x300000>;
+ no-map;
+ };
+
+ /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+ secmon_reserved_bl32: secmon at 5300000 {
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+};
+
+&uart_a {
+ status = "okay";
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
new file mode 100644
index 000000000000..1423d4a79156
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <0x2>;
+ #size-cells = <0x0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu100>;
+ };
+ core1 {
+ cpu = <&cpu101>;
+ };
+ core2 {
+ cpu = <&cpu102>;
+ };
+ core3 {
+ cpu = <&cpu103>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ };
+
+ cpu100: cpu at 100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu101: cpu at 101{
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ };
+
+ cpu102: cpu at 102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ };
+
+ cpu103: cpu at 103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ };
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ sm: secure-monitor {
+ compatible = "amlogic,meson-gxbb-sm";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller at fff01000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xfff01000 0 0x1000>,
+ <0x0 0xfff02000 0 0x0100>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ apb4: bus at fe000000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xfe000000 0x0 0x480000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+ uart_a: serial at 78000 {
+ compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
+ reg = <0x0 0x78000 0x0 0x18>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+ };
+
+ };
+};
--
2.41.0
More information about the linux-amlogic
mailing list