[PATCH v6 4/4] arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree
Lucas Tanure
tanure at linux.com
Thu Jun 29 00:10:33 PDT 2023
On Tue, Jun 27, 2023 at 10:21 AM Xianwei Zhao <xianwei.zhao at amlogic.com> wrote:
>
>
>
> On 2023/6/27 17:10, Lucas Tanure wrote:
> > [ EXTERNAL EMAIL ]
> >
> > The Khadas VIM4 uses the Amlogic A311D2 SoC, based on the Amlogic T7 SoC
> > family, on a board with the same form factor as the VIM3 models.
> >
> > - 8GB LPDDR4X 2016MHz
> > - 32GB eMMC 5.1 storage
> > - 32MB SPI flash
> > - 10/100/1000 Base-T Ethernet
> > - AP6275S Wireless (802.11 a/b/g/n/ac/ax, BT5.1)
> > - HDMI 2.1 video
> > - HDMI Input
> > - 1x USB 2.0 + 1x USB 3.0 ports
> > - 1x USB-C (power) with USB 2.0 OTG
> > - 3x LED's (1x red, 1x blue, 1x white)
> > - 3x buttons (power, function, reset)
> > - M2 socket with PCIe, USB, ADC & I2C
> > - 40pin GPIO Header
> > - 1x micro SD card slot
> >
> > Signed-off-by: Lucas Tanure <tanure at linux.com>
> > ---
> > arch/arm64/boot/dts/amlogic/Makefile | 1 +
> > .../amlogic/amlogic-t7-a311d2-khadas-vim4.dts | 52 ++++++
> > arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 158 ++++++++++++++++++
> > 3 files changed, 211 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
> > create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> > index cd1c5b04890a..166fec1e4229 100644
> > --- a/arch/arm64/boot/dts/amlogic/Makefile
> > +++ b/arch/arm64/boot/dts/amlogic/Makefile
> > @@ -1,4 +1,5 @@
> > # SPDX-License-Identifier: GPL-2.0
> > +dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
> > dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
> > dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
> > dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
> > diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
> > new file mode 100644
> > index 000000000000..5d7fb86a9738
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
> > @@ -0,0 +1,52 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2022 Wesion, Inc. All rights reserved.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "amlogic-t7.dtsi"
> > +
> > +/ {
> > + model = "Khadas vim4";
> > + compatible = "khadas,vim4", "amlogic,a311d2", "amlogic,t7";
> > +
> > + aliases {
> > + serial0 = &uart_A;
> > + };
> > +
> > + memory at 0 {
> > + device_type = "memory";
> > + reg = <0x0 0x0 0x2 0x0>; /* 8 GB */
> > + };
> > +
> > + reserved-memory {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + /* 3 MiB reserved for ARM Trusted Firmware (BL31) */
> > + secmon_reserved: secmon at 5000000 {
> > + reg = <0x0 0x05000000 0x0 0x300000>;
> > + no-map;
> > + };
> > +
> > + /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
> > + secmon_reserved_bl32: secmon at 5300000 {
> > + reg = <0x0 0x05300000 0x0 0x2000000>;
> > + no-map;
> > + };
> > + };
> > +
> > + xtal: xtal-clk {
> > + compatible = "fixed-clock";
> > + clock-frequency = <24000000>;
> > + clock-output-names = "xtal";
> > + #clock-cells = <0>;
> > + };
> > +
> > +};
> > +
> > +&uart_A {
> > + status = "okay";
> > +};
> > diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> > new file mode 100644
> > index 000000000000..6f3971b4df99
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> > @@ -0,0 +1,158 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +/ {
> > + interrupt-parent = <&gic>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + cpus {
> > + #address-cells = <0x2>;
> > + #size-cells = <0x0>;
> > +
> > + cpu-map {
> > + cluster0 {
> > + core0 {
> > + cpu = <&cpu100>;
> > + };
> > + core1 {
> > + cpu = <&cpu101>;
> > + };
> > + core2 {
> > + cpu = <&cpu102>;
> > + };
> > + core3 {
> > + cpu = <&cpu103>;
> > + };
> > + };
> > +
> > + cluster1 {
> > + core0 {
> > + cpu = <&cpu0>;
> > + };
> > + core1 {
> > + cpu = <&cpu1>;
> > + };
> > + core2 {
> > + cpu = <&cpu2>;
> > + };
> > + core3 {
> > + cpu = <&cpu3>;
> > + };
> > + };
> > + };
> > +
> > + cpu100: cpu at 100 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x0 0x100>;
> > + enable-method = "psci";
> > + };
> > +
> > + cpu101: cpu at 101{
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x0 0x101>;
> > + enable-method = "psci";
> > + };
> > +
> > + cpu102: cpu at 102 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x0 0x102>;
> > + enable-method = "psci";
> > + };
> > +
> > + cpu103: cpu at 103 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x0 0x103>;
> > + enable-method = "psci";
> > + };
> > +
> > + cpu0: cpu at 0 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a73";
> > + reg = <0x0 0x0>;
> > + enable-method = "psci";
> > + };
> > +
> > + cpu1: cpu at 1 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a73";
> > + reg = <0x0 0x1>;
> > + enable-method = "psci";
> > + };
> > +
> > + cpu2: cpu at 2 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a73";
> > + reg = <0x0 0x2>;
> > + enable-method = "psci";
> > + };
> > +
> > + cpu3: cpu at 3 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a73";
> > + reg = <0x0 0x3>;
> > + enable-method = "psci";
> > + };
> > + };
> > +
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> > + };
> cpu number is 8, not 4, need use GIC_CPU_MASK_SIMPLE(8)
> > +
> > + psci {
> > + compatible = "arm,psci-1.0";
> > + method = "smc";
> > + };
> > +
> > + sm: secure-monitor {
> > + compatible = "amlogic,meson-gxbb-sm";
> > + };
> > +
> > + soc {
> > + compatible = "simple-bus";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + gic: interrupt-controller at fff01000 {
> > + compatible = "arm,gic-400";
> > + #interrupt-cells = <3>;
> > + #address-cells = <0>;
> > + interrupt-controller;
> > + reg = <0x0 0xfff01000 0 0x1000>,
> > + <0x0 0xfff02000 0 0x0100>;
> > + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> cpu number is 8, not 4, need use GIC_CPU_MASK_SIMPLE(8)
OK
> > + };
> > +
> > + apb4: bus at fe000000 {
> > + compatible = "simple-bus";
> > + reg = <0x0 0xfe000000 0x0 0x480000>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
> > +
> > + uart_A: serial at 78000 {
> use lowercase, "uart_a"
OK
> > + compatible = "amlogic,t7-uart",
> > + "amlogic,meson-s4-uart";
> > + reg = <0x0 0x78000 0x0 0x18>;
> > + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> > + status = "disabled";
> > + clocks = <&xtal>, <&xtal>, <&xtal>
> "xtal" why defined in amlogic-t7-a311d2-khadas-vim4.dts files
The 24MHz clock is a crystal in VIm4 schematic, so its something the
board did to provide that clock.
Other boards using a311d2 could provide that clock in a different way.
Or are you saying that this clock is mandatory at boot time, and all
boards using this chip will have the same crystal?
> > + clock-names = "xtal", "pclk", "baud";
> > + };
> > + };
> > +
> > + };
> > +};
> > --
> > 2.41.0
> >
More information about the linux-amlogic
mailing list