[PATCH v5 4/4] arm64: dts: meson-t7-a311d2-khadas-vim4: add initial device-tree

Kelvin Zhang kelvin.zhang at amlogic.com
Sun Jun 25 19:36:55 PDT 2023


> The Khadas VIM4 uses the Amlogic A311D2 SoC, based on the Amlogic T7 SoC
> family, on a board with the same form factor as the VIM3 models.
> 
> - 8GB LPDDR4X 2016MHz
> - 32GB eMMC 5.1 storage
> - 32MB SPI flash
> - 10/100/1000 Base-T Ethernet
> - AP6275S Wireless (802.11 a/b/g/n/ac/ax, BT5.1)
> - HDMI 2.1 video
> - HDMI Input
> - 1x USB 2.0 + 1x USB 3.0 ports
> - 1x USB-C (power) with USB 2.0 OTG
> - 3x LED's (1x red, 1x blue, 1x white)
> - 3x buttons (power, function, reset)
> - M2 socket with PCIe, USB, ADC & I2C
> - 40pin GPIO Header
> - 1x micro SD card slot
> 
> Signed-off-by: Lucas Tanure <tanure at linux.com>
> ---
>   arch/arm64/boot/dts/amlogic/Makefile          |   1 +
>   .../amlogic/meson-t7-a311d2-khadas-vim4.dts   |  52 ++++++

Please rename "meson-t7-a311d2-khadas-vim4.dts" to 
"amlogic-t7-a311d2-khadas-vim4.dts".

>   arch/arm64/boot/dts/amlogic/meson-t7.dtsi     | 158 ++++++++++++++++++

Please rename "meson-t7.dtsi" to "amlogic-t7.dtsi".

>   3 files changed, 211 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts
>   create mode 100644 arch/arm64/boot/dts/amlogic/meson-t7.dtsi
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index cd1c5b04890a..1c5846bd1ca0 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -74,3 +74,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-t7-a311d2-khadas-vim4.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts
> new file mode 100644
> index 000000000000..04cc8b0dfd8c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts
> @@ -0,0 +1,52 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2022 Wesion, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-t7.dtsi"
> +
> +/ {
> +       model = "Khadas vim4";
> +       compatible = "khadas,vim4", "amlogic,a311d2", "amlogic,t7";
> +
> +       aliases {
> +               serial0 = &uart_A;
> +       };
> +
> +       memory at 0 {
> +               device_type = "memory";
> +               reg = <0x0 0x0 0x2 0x0>; /* 8 GB */
> +       };
> +
> +       reserved-memory {
> +               #address-cells = <2>;
> +               #size-cells = <2>;
> +               ranges;
> +
> +               /* 3 MiB reserved for ARM Trusted Firmware (BL31) */
> +               secmon_reserved: secmon at 5000000 {
> +                       reg = <0x0 0x05000000 0x0 0x300000>;
> +                       no-map;
> +               };
> +
> +               /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
> +               secmon_reserved_bl32: secmon at 5300000 {
> +                       reg = <0x0 0x05300000 0x0 0x2000000>;
> +                       no-map;
> +               };
> +       };
> +
> +       xtal: xtal-clk {
> +               compatible = "fixed-clock";
> +               clock-frequency = <24000000>;
> +               clock-output-names = "xtal";
> +               #clock-cells = <0>;
> +       };
> +
> +};
> +
> +&uart_A {
> +       status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-t7.dtsi b/arch/arm64/boot/dts/amlogic/meson-t7.dtsi
> new file mode 100644
> index 000000000000..9b8c33708ecd
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-t7.dtsi
> @@ -0,0 +1,158 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +       interrupt-parent = <&gic>;
> +       #address-cells = <2>;
> +       #size-cells = <2>;
> +
> +       cpus {
> +               #address-cells = <0x2>;
> +               #size-cells = <0x0>;
> +
> +               cpu-map {
> +                       cluster0 {
> +                               core0 {
> +                                       cpu = <&cpu100>;
> +                               };
> +                               core1 {
> +                                       cpu = <&cpu101>;
> +                               };
> +                               core2 {
> +                                       cpu = <&cpu102>;
> +                               };
> +                               core3 {
> +                                       cpu = <&cpu103>;
> +                               };
> +                       };
> +
> +                       cluster1 {
> +                               core0 {
> +                                       cpu = <&cpu0>;
> +                               };
> +                               core1 {
> +                                       cpu = <&cpu1>;
> +                               };
> +                               core2 {
> +                                       cpu = <&cpu2>;
> +                               };
> +                               core3 {
> +                                       cpu = <&cpu3>;
> +                               };
> +                       };
> +               };
> +
> +               cpu100: cpu at 100 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a53";
> +                       reg = <0x0 0x100>;
> +                       enable-method = "psci";
> +               };
> +
> +               cpu101: cpu at 101{
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a53";
> +                       reg = <0x0 0x101>;
> +                       enable-method = "psci";
> +               };
> +
> +               cpu102: cpu at 102 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a53";
> +                       reg = <0x0 0x102>;
> +                       enable-method = "psci";
> +               };
> +
> +               cpu103: cpu at 103 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a53";
> +                       reg = <0x0 0x103>;
> +                       enable-method = "psci";
> +               };
> +
> +               cpu0: cpu at 0 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a73";
> +                       reg = <0x0 0x0>;
> +                       enable-method = "psci";
> +               };
> +
> +               cpu1: cpu at 1 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a73";
> +                       reg = <0x0 0x1>;
> +                       enable-method = "psci";
> +               };
> +
> +               cpu2: cpu at 2 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a73";
> +                       reg = <0x0 0x2>;
> +                       enable-method = "psci";
> +               };
> +
> +               cpu3: cpu at 3 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a73";
> +                       reg = <0x0 0x3>;
> +                       enable-method = "psci";
> +               };
> +       };
> +
> +       timer {
> +               compatible = "arm,armv8-timer";
> +               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +                            <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +                            <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +                            <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> +       };
> +
> +       psci {
> +               compatible = "arm,psci-1.0";
> +               method = "smc";
> +       };
> +
> +       sm: secure-monitor {
> +               compatible = "amlogic,meson-gxbb-sm";
> +       };
> +
> +       soc {
> +               compatible = "simple-bus";
> +               #address-cells = <2>;
> +               #size-cells = <2>;
> +               ranges;
> +
> +               gic: interrupt-controller at fff01000 {
> +                       compatible = "arm,gic-400";
> +                       #interrupt-cells = <3>;
> +                       #address-cells = <0>;
> +                       interrupt-controller;
> +                       reg = <0x0 0xfff01000 0 0x1000>,
> +                             <0x0 0xfff02000 0 0x0100>;
> +                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +               };
> +
> +               apb4: bus at fe000000 {
> +                       compatible = "simple-bus";
> +                       reg = <0x0 0xfe000000 0x0 0x480000>;
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
> +
> +                       uart_A: serial at 78000 {
> +                               compatible = "amlogic,meson-t7-uart",
> +                                            "amlogic,meson-s4-uart";
> +                               reg = <0x0 0x78000 0x0 0x18>;
> +                               interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> +                               status = "disabled";
> +                               clocks = <&xtal>, <&xtal>, <&xtal>;
> +                               clock-names = "xtal", "pclk", "baud";
> +                       };
> +               };
> +
> +       };
> +};
> --
> 2.41.0
> 
> 
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic



More information about the linux-amlogic mailing list