[PATCH v2 2/2] arm64: dts: meson-t7-a311d2-khadas-vim4: add initial device-tree

[Krzysztof Kozlowski]

On 21/06/2023 00:09, Yixun Lan wrote:
>> +		apb4: bus at fe000000 {
>> +			compatible = "simple-bus";
>> +			reg = <0x0 0xfe000000 0x0 0x480000>;
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>> +
>> +			uart_A: serial at 78000 {
>> +				compatible = "amlogic,meson-t7-uart",
>                                               ~~~~~~~~~~~~~~~~~
> if you introduce new compatible string, then at least you need to document it
> so Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml need to be updated
> 
> but my qeustion here, why bother introducing new compatible string if nothing
> changed with the compatible data? given the uart is same IP with g12a, can't we just
> use "amlogic,meson-g12-uart" for this? no only it will reduce the structure length of
> meson_uart_dt_match[], but also relieve maintainer's review burden?

https://elixir.bootlin.com/linux/v6.1-rc1/source/Documentation/devicetree/bindings/writing-bindings.rst#L42

Best regards,
Krzysztof