[PATCH 2/6] dt-bindings: clock: Bindings for Meson T7 clock controller
Lucas Tanure
tanure at linux.com
Sun Jun 18 10:39:17 PDT 2023
On Thu, Jun 15, 2023 at 10:41 PM Conor Dooley <conor at kernel.org> wrote:
>
> Hey Lucas,
>
> On Thu, Jun 15, 2023 at 07:29:34PM +0100, Lucas Tanure wrote:
> > Add documentation for T7 the clock controller.
>
> Other than the bot's complaint, few comments for ya.
>
> > Signed-off-by: Lucas Tanure <tanure at linux.com>
> > ---
> > .../bindings/clock/amlogic,mesont7.yaml | 69 +++
> > include/dt-bindings/clock/mesont7-clkc.h | 487 ++++++++++++++++++
> > 2 files changed, 556 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
> > create mode 100644 include/dt-bindings/clock/mesont7-clkc.h
> >
> > diff --git a/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml b/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
> > new file mode 100644
> > index 000000000000..18e7cca0c0e1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
>
> The filename should match the compatible - please test the bindings,
> dt_binding_check will complain.
>
> > @@ -0,0 +1,69 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/amlogic,mesont7-clk.yaml#
>
> and this should match the filename
>
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Amlogic Meson T7 Clock Controller
> > +
> > +maintainers:
> > + - Lucas Tanure <tanure at linux.com>
> > +
> > +description: |
> > + The Amlogic Meson T7 clock controller generates and supplies clock to
> > + various peripherals within the SoC.
> > +
> > + This binding uses common clock bindings
> > + [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>
> This doesn't add anything as you're adding a yaml binding. I'd drop it
> (and the | from description: since you would no longer have formatting
> to preserve).
>
> > +
> > +properties:
> > + compatible:
> > + const: amlogic,t7-clkc
> > +
> > + reg:
> > + items:
> > + - description: basic registers
>
> What does "basic registers" mean? I think you should be more specific in
> your description.
>
> > + - description: pll registers
> > + - description: cpu_clk registers
> > +
> > + reg-names:
> > + items:
> > + - const: basic
> > + - const: pll
> > + - const: cpu_clk
> > +
> > + clocks:
> > + maxItems: 1
> > +
> > + clock-names:
> > + const: xtal
> > +
> > + '#clock-cells':
> > + const: 1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - reg-names
> > + - clocks
> > + - clock-names
> > + - '#clock-cells'
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + # Clock controller node:
> > + - |
> > + clkc: clock-controller {
>
> The comment above and the node name here can be dropped.
> You do however need to change "clock-controller" to
> "clock-controller@<addr>".
>
> > + compatible = "amlogic,t7-clkc";
> > + #clock-cells = <1>;
> > + reg = <0x0 0x0000 0x00 0x49c>,
> > + <0x0 0x8000 0x00 0x320>,
> > + <0x0 0xe040 0x00 0x0bc>;
>
> Drop the 0x0 stuff from here.
>
> > + reg-names = "basic", "pll", "cpu_clk";
> > + clocks = <&xtal>;
> > + clock-names = "xtal";
> > + status = "okay";
>
> status can be dropped, okay is the default.
>
> Cheers,
> Conor.
>
I will drop this patch for now, wait for the S4 clock driver to be
upstreamed, and use that as a base.
More information about the linux-amlogic
mailing list