[PATCH 2/6] dt-bindings: clock: Bindings for Meson T7 clock controller

Rob Herring robh at kernel.org
Thu Jun 15 12:47:40 PDT 2023


On Thu, 15 Jun 2023 19:29:34 +0100, Lucas Tanure wrote:
> Add documentation for T7 the clock controller.
> 
> Signed-off-by: Lucas Tanure <tanure at linux.com>
> ---
>  .../bindings/clock/amlogic,mesont7.yaml       |  69 +++
>  include/dt-bindings/clock/mesont7-clkc.h      | 487 ++++++++++++++++++
>  2 files changed, 556 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
>  create mode 100644 include/dt-bindings/clock/mesont7-clkc.h
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename
 	 $id: http://devicetree.org/schemas/clock/amlogic,mesont7-clk.yaml
 	file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
Documentation/devicetree/bindings/clock/amlogic,mesont7.example.dts:18.32-28.11: Warning (unit_address_vs_reg): /example-0/clock-controller: node has a reg or ranges property, but no unit name
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,mesont7.example.dtb: clock-controller: reg: [[0, 0], [0, 1180], [0, 32768], [0, 800], [0, 57408], [0, 188]] is too long
	from schema $id: http://devicetree.org/schemas/clock/amlogic,mesont7-clk.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230615182938.18487-3-tanure@linux.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.




More information about the linux-amlogic mailing list