[PATCH v1 0/2] Meson NAND: waiting w/o wired ready/busy pin

Arseniy Krasnov avkrasnov at sberdevices.ru
Wed Jun 7 11:58:31 PDT 2023



On 07.06.2023 21:48, Krzysztof Kozlowski wrote:
> On 07/06/2023 17:18, Arseniy Krasnov wrote:
>>
>>
>> On 07.06.2023 17:50, Arseniy Krasnov wrote:
>>> Main thing that this patchset adds is support for waiting for command
>>> completion when there is no wired ready/busy pin. This is implemented
>>> by using Meson specific command which operates without wired pin, but
>>> supports interrupt driven waiting (default way for waiting without
>>> hardware pin is 'nand_soft_waitrdy()' which uses software loop instead
>>> of interrupt). To select which mode to use during driver initialization,
>>> common NAND controller property is used - 'nand-rb'. It is described in
>>> 'nand-controller.yaml'. But for Meson, its description was missed in
>>> 'amlogic,meson-nand.yaml', so this patchset also adds support for it.
>>>
>>> Patch for bindings was tested with dt_binding_check and dtbs_check.
>>>
>>> Arseniy Krasnov (2):
>>>   dt-bindings: nand: meson: Fix 'nand-rb' property
>>>   mtd: rawnand: meson: waiting w/o wired ready/busy pin
>>>
>>>  .../bindings/mtd/amlogic,meson-nand.yaml      |  7 ++
>>>  drivers/mtd/nand/raw/meson_nand.c             | 82 ++++++++++++++++++-
>>>  2 files changed, 85 insertions(+), 4 deletions(-)
>>>
>>
>> Changelog:
>> * Two separate patches:
>>   For bindings: https://lore.kernel.org/linux-mtd/20230606193507.35024-1-AVKrasnov@sberdevices.ru/
>>   For driver: https://lore.kernel.org/linux-mtd/20230607073015.1280085-1-AVKrasnov@sberdevices.ru/
>>   Now fixed/updated and combined to this patchset with v1 version.
>>
>> * In binding patch:
>>   * Invalid type of 'nand-rb' is fixed, it was 'bool', now it is 'uint32 array' as required. Also
>>     new declaration of 'nand-rb' contains several restrictions like number of elements and min/max
>>     value of elements.
>>   * Location of 'nand-rb' is moved from the controller object to the chip object as required.
> 
> Version your patchsets. This is v2, not v1.

Ack, next will be v3

Thanks, Arseniy

> 
> Best regards,
> Krzysztof
> 



More information about the linux-amlogic mailing list