[PATCH v2 0/3] mmc: support setting card detect interrupt from drivers and use it in meson-gx

[Ulf Hansson]

On Thu, 16 Feb 2023 at 10:18, Krzysztof Kozlowski
<krzysztof.kozlowski at linaro.org> wrote:
>
> On 15/02/2023 13:48, Ulf Hansson wrote:
> > On Tue, 14 Feb 2023 at 22:39, Heiner Kallweit <hkallweit1 at gmail.com> wrote:
> >>
> >> On certain platforms like Amlogic Meson gpiod_to_irq() isn't supported
> >> due to the design of gpio / interrupt controller. Therefore provide an
> >> option for drivers to pass the card detect interrupt number
> >> (retrieved e.g. from device tree) to mmc core.
> >>
> >> v2:
> >> - use another mechanism for passing and storing the cd interrupt
> >> - add patch 2
> >>
> >> Heiner Kallweit (3):
> >>   mmc: core: support setting card detect interrupt from drivers
> >>   dt-bindings: mmc: meson-gx: support specifying cd interrupt
> >>   mmc: meson-gx: support platform interrupt as card detect interrupt
> >>
> >>  .../bindings/mmc/amlogic,meson-gx-mmc.yaml      |  2 +-
> >>  drivers/mmc/core/slot-gpio.c                    | 17 ++++++++++++++++-
> >>  drivers/mmc/host/meson-gx-mmc.c                 |  5 ++++-
> >>  include/linux/mmc/slot-gpio.h                   |  1 +
> >>  4 files changed, 22 insertions(+), 3 deletions(-)
> >>
> >
> > Applied for next, thanks!
>
> A bit too fast. Binding is incorrect - suggests ABI break and makes
> interrupts not described enough.

Sorry! Thanks for pointing this out. Heiner is fixing this with an
incremental patch on top, please help to review.

Kind regards
Uffe