[PATCH v2 1/3] mmc: core: support setting card detect interrupt from drivers

Heiner Kallweit hkallweit1 at gmail.com
Tue Feb 14 13:41:19 PST 2023


On certain platforms like Amlogic Meson gpiod_to_irq() isn't supported
due to the design of gpio / interrupt controller. Therefore provide an
option for drivers to pass the card detect interrupt number
(retrieved e.g. from device tree) to mmc core.

Suggested-by refers to the mechanism to pass and store the interrupt.

Suggested-by: Ulf Hansson <ulf.hansson at linaro.org>
Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
---
v2:
- use another mechanism for passing and storing the cd interrupt
---
 drivers/mmc/core/slot-gpio.c  | 17 ++++++++++++++++-
 include/linux/mmc/slot-gpio.h |  1 +
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
index dd2a4b6ab..2a2d949a9 100644
--- a/drivers/mmc/core/slot-gpio.c
+++ b/drivers/mmc/core/slot-gpio.c
@@ -23,6 +23,7 @@ struct mmc_gpio {
 	char *ro_label;
 	char *cd_label;
 	u32 cd_debounce_delay_ms;
+	int cd_irq;
 };
 
 static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
@@ -53,12 +54,24 @@ int mmc_gpio_alloc(struct mmc_host *host)
 	ctx->ro_label = devm_kasprintf(host->parent, GFP_KERNEL, "%s ro", devname);
 	if (!ctx->ro_label)
 		return -ENOMEM;
+	ctx->cd_irq = -EINVAL;
 	host->slot.handler_priv = ctx;
 	host->slot.cd_irq = -EINVAL;
 
 	return 0;
 }
 
+void mmc_gpio_set_cd_irq(struct mmc_host *host, int irq)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+
+	if (!ctx || irq < 0)
+		return;
+
+	ctx->cd_irq = irq;
+}
+EXPORT_SYMBOL(mmc_gpio_set_cd_irq);
+
 int mmc_gpio_get_ro(struct mmc_host *host)
 {
 	struct mmc_gpio *ctx = host->slot.handler_priv;
@@ -98,7 +111,9 @@ void mmc_gpiod_request_cd_irq(struct mmc_host *host)
 	 * Do not use IRQ if the platform prefers to poll, e.g., because that
 	 * IRQ number is already used by another unit and cannot be shared.
 	 */
-	if (!(host->caps & MMC_CAP_NEEDS_POLL))
+	if (ctx->cd_irq >= 0)
+		irq = ctx->cd_irq;
+	else if (!(host->caps & MMC_CAP_NEEDS_POLL))
 		irq = gpiod_to_irq(ctx->cd_gpio);
 
 	if (irq >= 0) {
diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h
index 4ae2f2908..5d3d15e97 100644
--- a/include/linux/mmc/slot-gpio.h
+++ b/include/linux/mmc/slot-gpio.h
@@ -15,6 +15,7 @@ struct mmc_host;
 
 int mmc_gpio_get_ro(struct mmc_host *host);
 int mmc_gpio_get_cd(struct mmc_host *host);
+void mmc_gpio_set_cd_irq(struct mmc_host *host, int irq);
 int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
 			 unsigned int idx, bool override_active_level,
 			 unsigned int debounce);
-- 
2.39.1





More information about the linux-amlogic mailing list