[PATCH 1/3] arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts

[Neil Armstrong]

On 10/02/2023 13:28, Christian Hewitt wrote:
> Alpha-sort the nodes, move the default line in the LED node to where it's
> normally found, and remove excess spacing. No functional changes.
> 
> Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
> Tested-by: Ferass El Hafidi <vitali64pmemail at protonmail.com>
> ---
>   .../boot/dts/amlogic/meson-gxbb-kii-pro.dts   | 32 ++++++++-----------
>   1 file changed, 14 insertions(+), 18 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> index 6d8cc00fedc7..9bfdb54d912a 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> @@ -6,21 +6,22 @@
>   /dts-v1/;
>   
>   #include "meson-gxbb-p20x.dtsi"
> -
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/input/input.h>
>   #include <dt-bindings/leds/common.h>
> +
>   / {
>   	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
>   	model = "Videostrong KII Pro";
>   
>   	leds {
>   		compatible = "gpio-leds";
> +
>   		status {
>   			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
> -			default-state = "off";
>   			color = <LED_COLOR_ID_RED>;
>   			function = LED_FUNCTION_STATUS;
> +			default-state = "off";
>   		};
>   	};
>   
> @@ -34,24 +35,8 @@ button-reset {
>   			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
>   		};
>   	};
> -
> -};
> -
> -
> -
> -&uart_A {
> -	status = "okay";
> -	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> -	pinctrl-names = "default";
> -	uart-has-rtscts;
> -
> -	bluetooth {
> -		compatible = "brcm,bcm4335a0";
> -	};
>   };
>   
> -
> -
>   &ethmac {
>   	status = "okay";
>   	pinctrl-0 = <&eth_rmii_pins>;
> @@ -78,3 +63,14 @@ eth_phy0: ethernet-phy at 0 {
>   &ir {
>   	linux,rc-map-name = "rc-videostrong-kii-pro";
>   };
> +
> +&uart_A {
> +	status = "okay";
> +	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> +	pinctrl-names = "default";
> +	uart-has-rtscts;
> +
> +	bluetooth {
> +		compatible = "brcm,bcm4335a0";
> +	};
> +};

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>