[PATCH v2] arm64: dts: amlogic: Make mmc host controller interrupts level-sensitive

Heiner Kallweit hkallweit1 at gmail.com
Wed Feb 8 22:44:05 PST 2023


On 08.02.2023 13:40, Neil Armstrong wrote:
> Le 27/01/2023 à 14:02, Heiner Kallweit a écrit :
>> On 27.01.2023 08:59, Neil Armstrong wrote:
>>> Hi,
>>>
>>> On 26/01/2023 15:03, Heiner Kallweit wrote:
>>>> The usage of edge-triggered interrupts lead to lost interrupts under load,
>>>> see [0]. This was confirmed to be fixed by using level-triggered
>>>> interrupts.
>>>> The report was about SDIO. However, as the host controller is the same
>>>> for SD and MMC, apply the change to all mmc controller instances.
>>>
>>> Thanks, I applied it in for-next so it runs on the CI tests.
>>>
>>>>
>>>> [0] https://www.spinics.net/lists/linux-mmc/msg73991.html
>>>>
>>>> Fixes: 1499218c80c9 ("arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi")
>>>
>>> I think we should find a better Fixes or perhaps split in 3 so it targets the
>>> right commit adding the nodes for each family.
>>>
>> This would be the cleanest option, right. Practically it shouldn't make
>> much of a difference. The chosen commit is from 2019, SDIO interrupt
>> support has been added just recently, and regarding MMC/SD it seems no
>> problems caused by edge-triggered interrupts are known.
> 
> I understand, but the Fixes tag must reflect what commit introduced the breakage,
> so either keep a single patch but list all commits introducing the MMC, SD & SDIO nodes
> on the 3 families, or split in 3 and specify the commit introducing the MMC, SD & SDIO
> node on each family.
> 
> I'll prefer the later.
> 
> If the patch isn't applicable for older kernels, it doesn't matter as the stable team
> will only apply the fix on a tree if it applies and builds.
> If you target an older release you can submit them a patch reworked to apply
> correctly if the original patch is already only Linus master tree.
> 
Do you need a revert for the current "TEST"-annotated commit in linux-next
as part of the series?

> And don't forget adding the Tested-by tags.
> 
> Thanks,
> Neil
> 
>>
>>> If the test doesn't report any breakage, I'll probably ask you that.
>>>
>> Sure.
>>
>>> Neil
>>>
>> Heiner
>>
> 
Heiner




More information about the linux-amlogic mailing list