[PATCH 0/5] clk: Make clk_rate_exclusive_get() return void

Wed Dec 13 07:52:52 PST 2023

On Wed, Dec 13, 2023 at 12:54:14PM +0100, Maxime Ripard wrote:
> On Wed, Dec 13, 2023 at 12:08:29PM +0100, Uwe Kleine-König wrote:
> > On Wed, Dec 13, 2023 at 09:36:49AM +0100, Maxime Ripard wrote:
> > > On Wed, Dec 13, 2023 at 08:43:00AM +0100, Uwe Kleine-König wrote:
> > > > On Wed, Dec 13, 2023 at 08:16:04AM +0100, Maxime Ripard wrote:
> > > > > On Tue, Dec 12, 2023 at 06:26:37PM +0100, Uwe Kleine-König wrote:
> > > > > > clk_rate_exclusive_get() returns zero unconditionally. Most users "know"
> > > > > > that and don't check the return value. This series fixes the four users
> > > > > > that do error checking on the returned value and then makes function
> > > > > > return void.
> > > > > > 
> > > > > > Given that the changes to the drivers are simple and so merge conflicts
> > > > > > (if any) should be easy to handle, I suggest to merge this complete
> > > > > > series via the clk tree.
> > > > > 
> > > > > I don't think it's the right way to go about it.
> > > > > 
> > > > > clk_rate_exclusive_get() should be expected to fail. For example if
> > > > > there's another user getting an exclusive rate on the same clock.
> > > > > 
> > > > > If we're not checking for it right now, then it should probably be
> > > > > fixed, but the callers checking for the error are right to do so if they
> > > > > rely on an exclusive rate. It's the ones that don't that should be
> > > > > modified.
> > > > 
> > > > If some other consumer has already "locked" a clock that I call
> > > > clk_rate_exclusive_get() for, this isn't an error. In my bubble I call
> > > > this function because I don't want the rate to change e.g. because I
> > > > setup some registers in the consuming device to provide a fixed UART
> > > > baud rate or i2c bus frequency (and that works as expected).
> > > 
> > > [a long text of mostly right things (Uwe's interpretation) that are
> > > however totally unrelated to the patches under discussion.]
> 
> I'm glad you consider it "mostly" right.

there was no offense intended. I didn't agree to all points, but didn't
think it was helpful to discuss that given that I considered them
orthogonal to my suggested modifications.

> > The clk API works with and without my patches in exactly the same way.
> > It just makes more explicit that clk_rate_exclusive_get() cannot fail
> > today and removes the error handling from consumers that is never used.
> 
> Not really, no.

What exactly do you oppose here? Both of my sentences are correct?!

> An API is an interface, meant to provide an abstraction. The only
> relevant thing is whether or not that function, from an abstract point
> of view, can fail.

What is the ideal API that you imagine? For me the ideal API is:

A consumer might call clk_rate_exclusive_get() and after that returns
all other consumers are prohibited to change the rate of the clock
(directly and indirectly) until clk_rate_exclusive_put() is called. If
this ends in a double lock (i.e. two different consumers locked the
clock), then I cannot change the rate (and neither can anybody else).

That is fine iff I don't need to change the rate and just want to rely
on it to keep its current value (which is a valid use case). And if I
want to change the rate but another consumer prevents that, I handle
that in the same away as I handle all other failures to set the rate to
the value I need. I have to prepare for that anyhow even if I have
ensured that I'm the only one having exclusivity on that clock.

Letting clk_rate_exclusive_get() fail in the assumption that the
consumer also wants to modify the rate is wrong. The obvious point where
to stop such consumers is when they call clk_rate_set(). And those who
don't modify the rate then continue without interruption even if there
are two lockers.

This can easily be implemented without clk_rate_exclusive_get() ever
failing.

> Can you fail to get the exclusivity? Yes. On a theoretical basis, you
> can, and the function was explicitly documented as such.

Sure, you could modify the clk internals such that
clk_rate_exclusive_get() needs to allocate memory. Or that it fails if
another consumer already has called it. At least the latter is a change
in semantics that requires to review (and maybe fix) all users. Also
note that calling clk_rate_exclusive_get() essentially locks all parent
clocks up to the root clock. So if clk_rate_exclusive_get() fails in the
presence of another locker, you can only have one locker per clock
hierarchy because it's impossible that both grab the lock on the root
clock.

> > Is there anyone working on improving the clk framework regarding how clk
> > rate exclusivity works? I'd probably not notice, but I guess there is
> > noone that I need to consider for.
> 
> I started working on it.

That is indeed a reason to postpone my patches. Feel free to Cc: me when
you're done. And please mention if you need longer than (say) 6 months,
then I'd argue that applying my patches now without caring for
out-of-tree users is the way to go.

My demand for such a rework would be that there is a function for 
consumers to call that don't have the requirement for a certain rate but
only any fixed rate that results in locking the clock's rate to whatever
it currently is. Today that function exists and is called
clk_rate_exclusive_get(); this might not be the best name, so maybe
rename it to something that you consider more sensible at the start of
your rework?!

Semantically that is similar to read_lock() (which never fails and
still prevents any writers). And clk_set_rate() is like 

	try_upgrade_read_lock_to_write_lock();
	actually_change_the_rate()
	downgrade_write_lock_to_read_lock();

where try_upgrade_read_lock_to_write_lock() fails if there are other
readers. So maybe a sensible name for today's clk_rate_exclusive_get()
is clk_rate_read_lock()?

If your variant of clk_rate_exclusive_get() might fail, you can already
prepare for me questioning why this is sensible and needed.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-amlogic/attachments/20231213/f6203b5a/attachment.sig>