[PATCH v2 0/2] Add some devices nodes for S4.

[Xianwei Zhao via B4 Relay]

Add some device nodes for SoC S4, including periphs clock controller
node, PLL clock controller node, I2C nodes, SPICC node, NAND
controller node, Ethernet MAC and PHY node.

Add reserved memory for board AQ222 which is used by ATF.
Enable NAND, SPICC nodes for board AQ222.

---
Changes in v2:
- Separate and independent commit for dts file.
- Revision format error.
- Add comment for resered memory.
- Link to v1: https://lore.kernel.org/all/20231129092949.2103338-1-xianwei.zhao@amlogic.com/

Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>

---
Xianwei Zhao (2):
      arm64: dts: amlogic: add some device nodes for S4
      arm64: dts: amlogic: enable some nodes for board AQ222

 .../boot/dts/amlogic/meson-s4-s805x2-aq222.dts     |  56 ++++
 arch/arm64/boot/dts/amlogic/meson-s4.dtsi          | 350 ++++++++++++++++++++-
 2 files changed, 405 insertions(+), 1 deletion(-)
---
base-commit: 093098370b4693b0da8b7fdf5fd212cb46705928
change-id: 20231208-s4-dts-24debd656209

Best regards,
-- 
Xianwei Zhao <xianwei.zhao at amlogic.com>