[PATCH v2 04/15] arm64: dts: meson: a1: reorder gpio_intc node definition

[Dmitry Rokosov]

It is recommended to maintain a sorted order of device tree entries, so
move the gpio_intc node ahead of the uart_AO node.

Fixes: ea254644a228 ("arm64: dts: meson-a1: add gpio_intc node")
Signed-off-by: Dmitry Rokosov <ddrokosov at sberdevices.ru>
---
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index f740153f3c1e..f95f4daef02c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -105,6 +105,16 @@ gpio: bank at 400 {
 
 			};
 
+			gpio_intc: interrupt-controller at 440 {
+				compatible = "amlogic,meson-a1-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x0440 0x0 0x14>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<49 50 51 52 53 54 55 56>;
+			};
+
 			uart_AO: serial at 1c00 {
 				compatible = "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";
@@ -124,16 +134,6 @@ uart_AO_B: serial at 2000 {
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
-
-			gpio_intc: interrupt-controller at 0440 {
-				compatible = "amlogic,meson-a1-gpio-intc",
-					     "amlogic,meson-gpio-intc";
-				reg = <0x0 0x0440 0x0 0x14>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				amlogic,channel-interrupts =
-					<49 50 51 52 53 54 55 56>;
-			};
 		};
 
 		gic: interrupt-controller at ff901000 {
-- 
2.36.0