[PATCH -next v2 02/25] spi: armada-3700: Use helper function devm_clk_get_prepared()
Jonathan Cameron
Jonathan.Cameron at Huawei.com
Wed Aug 23 10:10:32 PDT 2023
On Wed, 23 Aug 2023 21:39:15 +0800
Li Zetao <lizetao1 at huawei.com> wrote:
> Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
> and enabled clocks"), devm_clk_get() and clk_prepare() can now be replaced
> by devm_clk_get_prepared() when driver prepares the clocks for the whole
> lifetime of the device. Moreover, it is no longer necessary to unprepare
> the clocks explicitly.
>
> Signed-off-by: Li Zetao <lizetao1 at huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron at huawei.com>
> ---
> v1 -> v2: Drop the empty remove function a3700_spi_remove().
>
> drivers/spi/spi-armada-3700.c | 23 +++--------------------
> 1 file changed, 3 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c
> index 0103ac0158c0..3c9ed412932f 100644
> --- a/drivers/spi/spi-armada-3700.c
> +++ b/drivers/spi/spi-armada-3700.c
> @@ -865,18 +865,12 @@ static int a3700_spi_probe(struct platform_device *pdev)
>
> init_completion(&spi->done);
>
> - spi->clk = devm_clk_get(dev, NULL);
> + spi->clk = devm_clk_get_prepared(dev, NULL);
> if (IS_ERR(spi->clk)) {
> dev_err(dev, "could not find clk: %ld\n", PTR_ERR(spi->clk));
> goto error;
> }
>
> - ret = clk_prepare(spi->clk);
> - if (ret) {
> - dev_err(dev, "could not prepare clk: %d\n", ret);
> - goto error;
> - }
> -
> host->max_speed_hz = min_t(unsigned long, A3700_SPI_MAX_SPEED_HZ,
> clk_get_rate(spi->clk));
> host->min_speed_hz = DIV_ROUND_UP(clk_get_rate(spi->clk),
> @@ -888,40 +882,29 @@ static int a3700_spi_probe(struct platform_device *pdev)
> dev_name(dev), host);
> if (ret) {
> dev_err(dev, "could not request IRQ: %d\n", ret);
> - goto error_clk;
> + goto error;
> }
>
> ret = devm_spi_register_controller(dev, host);
> if (ret) {
> dev_err(dev, "Failed to register host\n");
> - goto error_clk;
> + goto error;
> }
>
> return 0;
>
> -error_clk:
> - clk_unprepare(spi->clk);
> error:
> spi_controller_put(host);
> out:
> return ret;
> }
>
> -static void a3700_spi_remove(struct platform_device *pdev)
> -{
> - struct spi_controller *host = platform_get_drvdata(pdev);
> - struct a3700_spi *spi = spi_controller_get_devdata(host);
> -
> - clk_unprepare(spi->clk);
> -}
> -
> static struct platform_driver a3700_spi_driver = {
> .driver = {
> .name = DRIVER_NAME,
> .of_match_table = of_match_ptr(a3700_spi_dt_ids),
> },
> .probe = a3700_spi_probe,
> - .remove_new = a3700_spi_remove,
> };
>
> module_platform_driver(a3700_spi_driver);
More information about the linux-amlogic
mailing list