[PATCH V2 2/4] watchdog: Add a new struct for Amlogic-GXBB driver
Guenter Roeck
linux at roeck-us.net
Wed Aug 23 08:47:57 PDT 2023
On Wed, Aug 02, 2023 at 11:32:20AM +0800, Huqiang Qin wrote:
> Add a new structure wdt_params to describe the watchdog difference
> of different chips.
>
> Signed-off-by: Huqiang Qin <huqiang.qin at amlogic.com>
> Reviewed-by: Dmitry Rokosov <ddrokosov at sberdevices.ru>
Reviewed-by: Guenter Roeck <linux at roeck-us.net>
> ---
>
> V1 -> V2: Rename rst_shift to rst and use the BIT() macro to build
> its initial value.
>
> drivers/watchdog/meson_gxbb_wdt.c | 16 +++++++++++++---
> 1 file changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c
> index 35d80cb39856..18180d91543e 100644
> --- a/drivers/watchdog/meson_gxbb_wdt.c
> +++ b/drivers/watchdog/meson_gxbb_wdt.c
> @@ -22,7 +22,6 @@
>
> #define GXBB_WDT_CTRL_CLKDIV_EN BIT(25)
> #define GXBB_WDT_CTRL_CLK_EN BIT(24)
> -#define GXBB_WDT_CTRL_EE_RESET BIT(21)
> #define GXBB_WDT_CTRL_EN BIT(18)
> #define GXBB_WDT_CTRL_DIV_MASK (BIT(18) - 1)
>
> @@ -45,6 +44,10 @@ struct meson_gxbb_wdt {
> struct clk *clk;
> };
>
> +struct wdt_params {
> + u32 rst;
> +};
> +
> static int meson_gxbb_wdt_start(struct watchdog_device *wdt_dev)
> {
> struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
> @@ -140,8 +143,12 @@ static const struct dev_pm_ops meson_gxbb_wdt_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(meson_gxbb_wdt_suspend, meson_gxbb_wdt_resume)
> };
>
> +static const struct wdt_params gxbb_params = {
> + .rst = BIT(21),
> +};
> +
> static const struct of_device_id meson_gxbb_wdt_dt_ids[] = {
> - { .compatible = "amlogic,meson-gxbb-wdt", },
> + { .compatible = "amlogic,meson-gxbb-wdt", .data = &gxbb_params, },
> { /* sentinel */ },
> };
> MODULE_DEVICE_TABLE(of, meson_gxbb_wdt_dt_ids);
> @@ -150,6 +157,7 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct meson_gxbb_wdt *data;
> + struct wdt_params *params;
> u32 ctrl_reg;
>
> data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> @@ -164,6 +172,8 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev)
> if (IS_ERR(data->clk))
> return PTR_ERR(data->clk);
>
> + params = (struct wdt_params *)of_device_get_match_data(dev);
> +
> platform_set_drvdata(pdev, data);
>
> data->wdt_dev.parent = dev;
> @@ -191,7 +201,7 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev)
> /* Setup with 1ms timebase */
> ctrl_reg |= ((clk_get_rate(data->clk) / 1000) &
> GXBB_WDT_CTRL_DIV_MASK) |
> - GXBB_WDT_CTRL_EE_RESET |
> + params->rst |
> GXBB_WDT_CTRL_CLK_EN |
> GXBB_WDT_CTRL_CLKDIV_EN;
>
More information about the linux-amlogic
mailing list