[PATCH -next v2 12/25] spi: dw-mmio: Use helper function devm_clk_get_*()
Serge Semin
fancer.lancer at gmail.com
Wed Aug 23 07:20:12 PDT 2023
On Wed, Aug 23, 2023 at 09:39:25PM +0800, Li Zetao wrote:
> Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
> and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
> replaced by devm_clk_get_enabled() when driver enables (and possibly
> prepares) the clocks for the whole lifetime of the device. Moreover, it is
> no longer necessary to unprepare and disable the clocks explicitly. Also,
> devm_clk_get_optional() and clk_prepare_enable() can now be replaced by
> devm_clk_get_optional_enabled(). Moreover, the lable "out_clk" no longer
> makes sense, rename it to "out_reset".
>
> Signed-off-by: Li Zetao <lizetao1 at huawei.com>
> ---
> v1 -> v2: Return directly instead of calling reset_control_deassert()
> before the reset control handler has been requested. And use the
> "out_reset" label instead of "out" before calling pm_runtime_enable().
LGTM. Thanks!
Acked-by: Serge Semin <fancer.lancer at gmail.com>
-Serge(y)
>
> drivers/spi/spi-dw-mmio.c | 31 +++++++++----------------------
> 1 file changed, 9 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
> index 805264c9c65c..46801189a651 100644
> --- a/drivers/spi/spi-dw-mmio.c
> +++ b/drivers/spi/spi-dw-mmio.c
> @@ -340,29 +340,20 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
> if (dws->irq < 0)
> return dws->irq; /* -ENXIO */
>
> - dwsmmio->clk = devm_clk_get(&pdev->dev, NULL);
> + dwsmmio->clk = devm_clk_get_enabled(&pdev->dev, NULL);
> if (IS_ERR(dwsmmio->clk))
> return PTR_ERR(dwsmmio->clk);
> - ret = clk_prepare_enable(dwsmmio->clk);
> - if (ret)
> - return ret;
>
> /* Optional clock needed to access the registers */
> - dwsmmio->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
> - if (IS_ERR(dwsmmio->pclk)) {
> - ret = PTR_ERR(dwsmmio->pclk);
> - goto out_clk;
> - }
> - ret = clk_prepare_enable(dwsmmio->pclk);
> - if (ret)
> - goto out_clk;
> + dwsmmio->pclk = devm_clk_get_optional_enabled(&pdev->dev, "pclk");
> + if (IS_ERR(dwsmmio->pclk))
> + return PTR_ERR(dwsmmio->pclk);
>
> /* find an optional reset controller */
> dwsmmio->rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, "spi");
> - if (IS_ERR(dwsmmio->rstc)) {
> - ret = PTR_ERR(dwsmmio->rstc);
> - goto out_clk;
> - }
> + if (IS_ERR(dwsmmio->rstc))
> + return PTR_ERR(dwsmmio->rstc);
> +
> reset_control_deassert(dwsmmio->rstc);
>
> dws->bus_num = pdev->id;
> @@ -383,7 +374,7 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
> if (init_func) {
> ret = init_func(pdev, dwsmmio);
> if (ret)
> - goto out;
> + goto out_reset;
> }
>
> pm_runtime_enable(&pdev->dev);
> @@ -397,9 +388,7 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
>
> out:
> pm_runtime_disable(&pdev->dev);
> - clk_disable_unprepare(dwsmmio->pclk);
> -out_clk:
> - clk_disable_unprepare(dwsmmio->clk);
> +out_reset:
> reset_control_assert(dwsmmio->rstc);
>
> return ret;
> @@ -411,8 +400,6 @@ static void dw_spi_mmio_remove(struct platform_device *pdev)
>
> dw_spi_remove_host(&dwsmmio->dws);
> pm_runtime_disable(&pdev->dev);
> - clk_disable_unprepare(dwsmmio->pclk);
> - clk_disable_unprepare(dwsmmio->clk);
> reset_control_assert(dwsmmio->rstc);
> }
>
> --
> 2.34.1
>
More information about the linux-amlogic
mailing list