[PATCH -next v2 05/25] spi: spi-axi-spi-engine: Use helper function devm_clk_get_enabled()
Li Zetao
lizetao1 at huawei.com
Wed Aug 23 06:39:18 PDT 2023
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables (and possibly
prepares) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clocks explicitly.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron at huawei.com>
Signed-off-by: Li Zetao <lizetao1 at huawei.com>
---
v1 -> v2: None
drivers/spi/spi-axi-spi-engine.c | 25 +++++--------------------
1 file changed, 5 insertions(+), 20 deletions(-)
diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c
index 0258c9a72fdc..b96e55f59d1a 100644
--- a/drivers/spi/spi-axi-spi-engine.c
+++ b/drivers/spi/spi-axi-spi-engine.c
@@ -485,30 +485,22 @@ static int spi_engine_probe(struct platform_device *pdev)
spin_lock_init(&spi_engine->lock);
- spi_engine->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
+ spi_engine->clk = devm_clk_get_enabled(&pdev->dev, "s_axi_aclk");
if (IS_ERR(spi_engine->clk)) {
ret = PTR_ERR(spi_engine->clk);
goto err_put_host;
}
- spi_engine->ref_clk = devm_clk_get(&pdev->dev, "spi_clk");
+ spi_engine->ref_clk = devm_clk_get_enabled(&pdev->dev, "spi_clk");
if (IS_ERR(spi_engine->ref_clk)) {
ret = PTR_ERR(spi_engine->ref_clk);
goto err_put_host;
}
- ret = clk_prepare_enable(spi_engine->clk);
- if (ret)
- goto err_put_host;
-
- ret = clk_prepare_enable(spi_engine->ref_clk);
- if (ret)
- goto err_clk_disable;
-
spi_engine->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(spi_engine->base)) {
ret = PTR_ERR(spi_engine->base);
- goto err_ref_clk_disable;
+ goto err_put_host;
}
version = readl(spi_engine->base + SPI_ENGINE_REG_VERSION);
@@ -518,7 +510,7 @@ static int spi_engine_probe(struct platform_device *pdev)
SPI_ENGINE_VERSION_MINOR(version),
SPI_ENGINE_VERSION_PATCH(version));
ret = -ENODEV;
- goto err_ref_clk_disable;
+ goto err_put_host;
}
writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_RESET);
@@ -527,7 +519,7 @@ static int spi_engine_probe(struct platform_device *pdev)
ret = request_irq(irq, spi_engine_irq, 0, pdev->name, host);
if (ret)
- goto err_ref_clk_disable;
+ goto err_put_host;
host->dev.of_node = pdev->dev.of_node;
host->mode_bits = SPI_CPOL | SPI_CPHA | SPI_3WIRE;
@@ -545,10 +537,6 @@ static int spi_engine_probe(struct platform_device *pdev)
return 0;
err_free_irq:
free_irq(irq, host);
-err_ref_clk_disable:
- clk_disable_unprepare(spi_engine->ref_clk);
-err_clk_disable:
- clk_disable_unprepare(spi_engine->clk);
err_put_host:
spi_controller_put(host);
return ret;
@@ -569,9 +557,6 @@ static void spi_engine_remove(struct platform_device *pdev)
writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
writel_relaxed(0x01, spi_engine->base + SPI_ENGINE_REG_RESET);
-
- clk_disable_unprepare(spi_engine->ref_clk);
- clk_disable_unprepare(spi_engine->clk);
}
static const struct of_device_id spi_engine_match_table[] = {
--
2.34.1
More information about the linux-amlogic
mailing list