[PATCH -next 17/25] spi: microchip-core-qspi: Use helper function devm_clk_get_enabled()
Li Zetao
lizetao1 at huawei.com
Tue Aug 22 06:12:29 PDT 2023
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables (and possibly
prepares) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clocks explicitly.
Signed-off-by: Li Zetao <lizetao1 at huawei.com>
---
drivers/spi/spi-microchip-core-qspi.c | 29 +++++++--------------------
1 file changed, 7 insertions(+), 22 deletions(-)
diff --git a/drivers/spi/spi-microchip-core-qspi.c b/drivers/spi/spi-microchip-core-qspi.c
index 4f76ddf97b10..396dfc0fa278 100644
--- a/drivers/spi/spi-microchip-core-qspi.c
+++ b/drivers/spi/spi-microchip-core-qspi.c
@@ -518,30 +518,23 @@ static int mchp_coreqspi_probe(struct platform_device *pdev)
return dev_err_probe(&pdev->dev, PTR_ERR(qspi->regs),
"failed to map registers\n");
- qspi->clk = devm_clk_get(&pdev->dev, NULL);
+ qspi->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(qspi->clk))
return dev_err_probe(&pdev->dev, PTR_ERR(qspi->clk),
"could not get clock\n");
- ret = clk_prepare_enable(qspi->clk);
- if (ret)
- return dev_err_probe(&pdev->dev, ret,
- "failed to enable clock\n");
-
init_completion(&qspi->data_completion);
mutex_init(&qspi->op_lock);
qspi->irq = platform_get_irq(pdev, 0);
- if (qspi->irq < 0) {
- ret = qspi->irq;
- goto out;
- }
+ if (qspi->irq < 0)
+ return qspi->irq;
ret = devm_request_irq(&pdev->dev, qspi->irq, mchp_coreqspi_isr,
IRQF_SHARED, pdev->name, qspi);
if (ret) {
dev_err(&pdev->dev, "request_irq failed %d\n", ret);
- goto out;
+ return ret;
}
ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
@@ -552,18 +545,11 @@ static int mchp_coreqspi_probe(struct platform_device *pdev)
ctlr->dev.of_node = np;
ret = devm_spi_register_controller(&pdev->dev, ctlr);
- if (ret) {
- dev_err_probe(&pdev->dev, ret,
- "spi_register_controller failed\n");
- goto out;
- }
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "spi_register_controller failed\n");
return 0;
-
-out:
- clk_disable_unprepare(qspi->clk);
-
- return ret;
}
static void mchp_coreqspi_remove(struct platform_device *pdev)
@@ -574,7 +560,6 @@ static void mchp_coreqspi_remove(struct platform_device *pdev)
mchp_coreqspi_disable_ints(qspi);
control &= ~CONTROL_ENABLE;
writel_relaxed(control, qspi->regs + REG_CONTROL);
- clk_disable_unprepare(qspi->clk);
}
static const struct of_device_id mchp_coreqspi_of_match[] = {
--
2.34.1
More information about the linux-amlogic
mailing list