[PATCH -next 14/25] spi: lantiq-ssc: Use helper function devm_clk_get_enabled()
Li Zetao
lizetao1 at huawei.com
Tue Aug 22 06:12:26 PDT 2023
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables (and possibly
prepares) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clocks explicitly.
Signed-off-by: Li Zetao <lizetao1 at huawei.com>
---
drivers/spi/spi-lantiq-ssc.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/spi/spi-lantiq-ssc.c b/drivers/spi/spi-lantiq-ssc.c
index 938e9e577e4f..18a46569ba46 100644
--- a/drivers/spi/spi-lantiq-ssc.c
+++ b/drivers/spi/spi-lantiq-ssc.c
@@ -932,14 +932,11 @@ static int lantiq_ssc_probe(struct platform_device *pdev)
if (err)
goto err_host_put;
- spi->spi_clk = devm_clk_get(dev, "gate");
+ spi->spi_clk = devm_clk_get_enabled(dev, "gate");
if (IS_ERR(spi->spi_clk)) {
err = PTR_ERR(spi->spi_clk);
goto err_host_put;
}
- err = clk_prepare_enable(spi->spi_clk);
- if (err)
- goto err_host_put;
/*
* Use the old clk_get_fpi() function on Lantiq platform, till it
@@ -952,7 +949,7 @@ static int lantiq_ssc_probe(struct platform_device *pdev)
#endif
if (IS_ERR(spi->fpi_clk)) {
err = PTR_ERR(spi->fpi_clk);
- goto err_clk_disable;
+ goto err_host_put;
}
num_cs = 8;
@@ -1010,8 +1007,6 @@ static int lantiq_ssc_probe(struct platform_device *pdev)
destroy_workqueue(spi->wq);
err_clk_put:
clk_put(spi->fpi_clk);
-err_clk_disable:
- clk_disable_unprepare(spi->spi_clk);
err_host_put:
spi_controller_put(host);
@@ -1029,7 +1024,6 @@ static void lantiq_ssc_remove(struct platform_device *pdev)
hw_enter_config_mode(spi);
destroy_workqueue(spi->wq);
- clk_disable_unprepare(spi->spi_clk);
clk_put(spi->fpi_clk);
}
--
2.34.1
More information about the linux-amlogic
mailing list