[PATCH -next 06/25] spi: bcm2835: Use helper function devm_clk_get_enabled()
Li Zetao
lizetao1 at huawei.com
Tue Aug 22 06:12:18 PDT 2023
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables (and possibly
prepares) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clocks explicitly.
Signed-off-by: Li Zetao <lizetao1 at huawei.com>
---
drivers/spi/spi-bcm2835.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index e7bb2714678a..a457ad2f7db1 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -1352,7 +1352,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
if (IS_ERR(bs->regs))
return PTR_ERR(bs->regs);
- bs->clk = devm_clk_get(&pdev->dev, NULL);
+ bs->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(bs->clk))
return dev_err_probe(&pdev->dev, PTR_ERR(bs->clk),
"could not get clk\n");
@@ -1363,14 +1363,11 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
if (bs->irq < 0)
return bs->irq;
- err = clk_prepare_enable(bs->clk);
- if (err)
- return err;
bs->clk_hz = clk_get_rate(bs->clk);
err = bcm2835_dma_init(ctlr, &pdev->dev, bs);
if (err)
- goto out_clk_disable;
+ return err;
/* initialise the hardware with the default polarities */
bcm2835_wr(bs, BCM2835_SPI_CS,
@@ -1396,8 +1393,6 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
out_dma_release:
bcm2835_dma_release(ctlr, bs);
-out_clk_disable:
- clk_disable_unprepare(bs->clk);
return err;
}
@@ -1415,8 +1410,6 @@ static void bcm2835_spi_remove(struct platform_device *pdev)
/* Clear FIFOs, and disable the HW block */
bcm2835_wr(bs, BCM2835_SPI_CS,
BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
-
- clk_disable_unprepare(bs->clk);
}
static const struct of_device_id bcm2835_spi_match[] = {
--
2.34.1
More information about the linux-amlogic
mailing list