[PATCH v3] net: phy: meson-gxl: implement meson_gxl_phy_resume()
Heiner Kallweit
hkallweit1 at gmail.com
Mon Aug 7 23:42:31 PDT 2023
On 08.08.2023 07:00, Da Xue wrote:
> After suspend and resume, the meson GXL internal PHY config needs to
To avoid misunderstandings:
You mean suspend/resume just of the PHY, or of the system?
Description sounds like this patch is a fix and should go to stable.
So add a Fixes tag.
And a formal remark: Your patch misses the net / net-next annotation.
> be initialized again, otherwise the carrier cannot be found:
>
> eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state
> DOWN group default qlen 1000
>
> After the patch, resume:
>
> eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
> group default qlen 1000
>
> Signed-off-by: Luke Lu <luke.lu at libre.computer>
> Signed-off-by: Da Xue <da at libre.computer>
> ---
> Changes since v2:
> - fix missing parameter of genphy_resume()
>
> Changes since v1:
> - call generic genphy_resume()
> ---
> drivers/net/phy/meson-gxl.c | 14 +++++++++++++-
> 1 file changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
> index bb9b33b6bce2..bbad26b7c5a1 100644
> --- a/drivers/net/phy/meson-gxl.c
> +++ b/drivers/net/phy/meson-gxl.c
> @@ -132,6 +132,18 @@ static int meson_gxl_config_init(struct phy_device *phydev)
> return 0;
> }
>
> +static int meson_gxl_phy_resume(struct phy_device *phydev)
> +{
> + int ret;
> +
> + genphy_resume(phydev);
Return value of this function should be checked.
> + ret = meson_gxl_config_init(phydev);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> /* This function is provided to cope with the possible failures of this phy
> * during aneg process. When aneg fails, the PHY reports that aneg is done
> * but the value found in MII_LPA is wrong:
> @@ -196,7 +208,7 @@ static struct phy_driver meson_gxl_phy[] = {
> .config_intr = smsc_phy_config_intr,
> .handle_interrupt = smsc_phy_handle_interrupt,
> .suspend = genphy_suspend,
> - .resume = genphy_resume,
> + .resume = meson_gxl_phy_resume,
> .read_mmd = genphy_read_mmd_unsupported,
> .write_mmd = genphy_write_mmd_unsupported,
> }, {
More information about the linux-amlogic
mailing list