[PATCH] [PATCH v2] net: phy: meson-gxl: implement meson_gxl_phy_resume()
Simon Horman
horms at kernel.org
Mon Aug 7 07:21:58 PDT 2023
On Fri, Aug 04, 2023 at 04:19:02PM -0400, Da Xue wrote:
> After suspend and resume, the meson GXL internal PHY config needs to be initialized again or the carrier cannot be found.
>
> Signed-off-by: Luke Lu <luke.lu at libre.computer>
> Reviewed-by: Da Xue <da at libre.computer>
Hi Da Xue,
as the posted of this patch you need to provide your signed-off-by line.
>From the way things are structured above it is unclear what Luke's
role is. Was he the author of the patch? If so the body of the email,
just above the patch description, should start with:
From: Luke Lu <luke.lu at libre.computer>
Link: https://www.kernel.org/doc/html/latest/process/submitting-patches.html#sign-your-work-the-developer-s-certificate-of-origin
> ---
> drivers/net/phy/meson-gxl.c | 14 +++++++++++++-
> 1 file changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
> index bb9b33b6b..2df516ed4 100644
> --- a/drivers/net/phy/meson-gxl.c
> +++ b/drivers/net/phy/meson-gxl.c
> @@ -132,6 +132,18 @@ static int meson_gxl_config_init(struct phy_device *phydev)
> return 0;
> }
>
> +static int meson_gxl_phy_resume(struct phy_device *phydev)
> +{
> + int ret;
> +
> + genphy_resume();
This patch doesn't compile because the call to genphy_resume() has too
few arguments.
> + ret = meson_gxl_config_init(phydev);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> /* This function is provided to cope with the possible failures of this phy
> * during aneg process. When aneg fails, the PHY reports that aneg is done
> * but the value found in MII_LPA is wrong:
> @@ -196,7 +208,7 @@ static struct phy_driver meson_gxl_phy[] = {
> .config_intr = smsc_phy_config_intr,
> .handle_interrupt = smsc_phy_handle_interrupt,
> .suspend = genphy_suspend,
> - .resume = genphy_resume,
> + .resume = meson_gxl_phy_resume,
> .read_mmd = genphy_read_mmd_unsupported,
> .write_mmd = genphy_write_mmd_unsupported,
> }, {
> --
> 2.39.2
>
>
More information about the linux-amlogic
mailing list