[PATCH v7 2/9] clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks

[Neil Armstrong]

On 04/08/2023 11:59, Jerome Brunet wrote:
> 
> On Thu 03 Aug 2023 at 14:03, Neil Armstrong <neil.armstrong at linaro.org> wrote:
> 
>> Add new CTS_ENCL & CTS_ENCL_SEL clocks for the G12A compatible
>> SoCs, they are used to feed the VPU LCD Pixel encoder used for
>> DSI display purposes.
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
>> ---
>>   drivers/clk/meson/g12a.c | 40 ++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 40 insertions(+)
>>
>> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
>> index ceabd5f4b2ac..5d62134335c1 100644
>> --- a/drivers/clk/meson/g12a.c
>> +++ b/drivers/clk/meson/g12a.c
>> @@ -3549,6 +3549,22 @@ static struct clk_regmap g12a_cts_encp_sel = {
>>   	},
>>   };
>>   
>> +static struct clk_regmap g12a_cts_encl_sel = {
>> +	.data = &(struct clk_regmap_mux_data){
>> +		.offset = HHI_VIID_CLK_DIV,
>> +		.mask = 0xf,
>> +		.shift = 12,
>> +		.table = mux_table_cts_sel,
>> +	},
>> +	.hw.init = &(struct clk_init_data){
>> +		.name = "cts_encl_sel",
>> +		.ops = &clk_regmap_mux_ops,
>> +		.parent_hws = g12a_cts_parent_hws,
>> +		.num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
>> +		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
> 
> Why nocache ?
> This is usually used when the consumer driver is poking around behind
> CCF back.
> 
> Any chance this can use assigned-parent or CCF directly ?
> 
>> +	},
>> +};
>> +
>>   static struct clk_regmap g12a_cts_vdac_sel = {
>>   	.data = &(struct clk_regmap_mux_data){
>>   		.offset = HHI_VIID_CLK_DIV,
>> @@ -3628,6 +3644,22 @@ static struct clk_regmap g12a_cts_encp = {
>>   	},
>>   };
>>   
>> +static struct clk_regmap g12a_cts_encl = {
>> +	.data = &(struct clk_regmap_gate_data){
>> +		.offset = HHI_VID_CLK_CNTL2,
>> +		.bit_idx = 3,
>> +	},
>> +	.hw.init = &(struct clk_init_data) {
>> +		.name = "cts_encl",
>> +		.ops = &clk_regmap_gate_ops,
>> +		.parent_hws = (const struct clk_hw *[]) {
>> +			&g12a_cts_encl_sel.hw
>> +		},
>> +		.num_parents = 1,
>> +		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> 
> What is the reason for IGNORE_UNUSED ?
> If you need to keep the clock on while the driver comes up, please
> document it here.

The clocks are added like other video clock, unused & nocache, then
enabled correctly in patch 4 to be used by CCF.

Neil

> 
>> +	},
>> +};
>> +
>>   static struct clk_regmap g12a_cts_vdac = {
>>   	.data = &(struct clk_regmap_gate_data){
>>   		.offset = HHI_VID_CLK_CNTL2,
>> @@ -4407,10 +4439,12 @@ static struct clk_hw *g12a_hw_clks[] = {
>>   	[CLKID_VCLK2_DIV12]		= &g12a_vclk2_div12.hw,
>>   	[CLKID_CTS_ENCI_SEL]		= &g12a_cts_enci_sel.hw,
>>   	[CLKID_CTS_ENCP_SEL]		= &g12a_cts_encp_sel.hw,
>> +	[CLKID_CTS_ENCL_SEL]		= &g12a_cts_encl_sel.hw,
>>   	[CLKID_CTS_VDAC_SEL]		= &g12a_cts_vdac_sel.hw,
>>   	[CLKID_HDMI_TX_SEL]		= &g12a_hdmi_tx_sel.hw,
>>   	[CLKID_CTS_ENCI]		= &g12a_cts_enci.hw,
>>   	[CLKID_CTS_ENCP]		= &g12a_cts_encp.hw,
>> +	[CLKID_CTS_ENCL]		= &g12a_cts_encl.hw,
>>   	[CLKID_CTS_VDAC]		= &g12a_cts_vdac.hw,
>>   	[CLKID_HDMI_TX]			= &g12a_hdmi_tx.hw,
>>   	[CLKID_HDMI_SEL]		= &g12a_hdmi_sel.hw,
>> @@ -4632,10 +4666,12 @@ static struct clk_hw *g12b_hw_clks[] = {
>>   	[CLKID_VCLK2_DIV12]		= &g12a_vclk2_div12.hw,
>>   	[CLKID_CTS_ENCI_SEL]		= &g12a_cts_enci_sel.hw,
>>   	[CLKID_CTS_ENCP_SEL]		= &g12a_cts_encp_sel.hw,
>> +	[CLKID_CTS_ENCL_SEL]		= &g12a_cts_encl_sel.hw,
>>   	[CLKID_CTS_VDAC_SEL]		= &g12a_cts_vdac_sel.hw,
>>   	[CLKID_HDMI_TX_SEL]		= &g12a_hdmi_tx_sel.hw,
>>   	[CLKID_CTS_ENCI]		= &g12a_cts_enci.hw,
>>   	[CLKID_CTS_ENCP]		= &g12a_cts_encp.hw,
>> +	[CLKID_CTS_ENCL]		= &g12a_cts_encl.hw,
>>   	[CLKID_CTS_VDAC]		= &g12a_cts_vdac.hw,
>>   	[CLKID_HDMI_TX]			= &g12a_hdmi_tx.hw,
>>   	[CLKID_HDMI_SEL]		= &g12a_hdmi_sel.hw,
>> @@ -4892,10 +4928,12 @@ static struct clk_hw *sm1_hw_clks[] = {
>>   	[CLKID_VCLK2_DIV12]		= &g12a_vclk2_div12.hw,
>>   	[CLKID_CTS_ENCI_SEL]		= &g12a_cts_enci_sel.hw,
>>   	[CLKID_CTS_ENCP_SEL]		= &g12a_cts_encp_sel.hw,
>> +	[CLKID_CTS_ENCL_SEL]		= &g12a_cts_encl_sel.hw,
>>   	[CLKID_CTS_VDAC_SEL]		= &g12a_cts_vdac_sel.hw,
>>   	[CLKID_HDMI_TX_SEL]		= &g12a_hdmi_tx_sel.hw,
>>   	[CLKID_CTS_ENCI]		= &g12a_cts_enci.hw,
>>   	[CLKID_CTS_ENCP]		= &g12a_cts_encp.hw,
>> +	[CLKID_CTS_ENCL]		= &g12a_cts_encl.hw,
>>   	[CLKID_CTS_VDAC]		= &g12a_cts_vdac.hw,
>>   	[CLKID_HDMI_TX]			= &g12a_hdmi_tx.hw,
>>   	[CLKID_HDMI_SEL]		= &g12a_hdmi_sel.hw,
>> @@ -5123,10 +5161,12 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
>>   	&g12a_vclk2_div12_en,
>>   	&g12a_cts_enci_sel,
>>   	&g12a_cts_encp_sel,
>> +	&g12a_cts_encl_sel,
>>   	&g12a_cts_vdac_sel,
>>   	&g12a_hdmi_tx_sel,
>>   	&g12a_cts_enci,
>>   	&g12a_cts_encp,
>> +	&g12a_cts_encl,
>>   	&g12a_cts_vdac,
>>   	&g12a_hdmi_tx,
>>   	&g12a_hdmi_sel,
>