[PATCH V7 2/4] dt-bindings: clock: document Amlogic S4 SoC peripherals clock controller
Neil Armstrong
neil.armstrong at linaro.org
Thu Apr 27 04:36:13 PDT 2023
Hi,
On 27/04/2023 10:52, Dmitry Rokosov wrote:
> On Thu, Apr 27, 2023 at 04:03:41PM +0800, Yu Tu wrote:
>>
>>
>> On 2023/4/26 18:49, Dmitry Rokosov wrote:
>>> [ EXTERNAL EMAIL ]
>>>
>>> Hello Yu,
>>>
>>> Thank you for the patch series! Please find my comments below.
>>>
>>
>> Hi Dmitry，
>> Thank you for your review.
>>
>>> On Mon, Apr 17, 2023 at 02:50:03PM +0800, Yu Tu wrote:
>>>> Add the S4 peripherals clock controller dt-bindings in the s4 SoC
>>>> family.
>>>>
>>>> Signed-off-by: Yu Tu <yu.tu at amlogic.com>
>>>> ---
>>>> .../clock/amlogic,s4-peripherals-clkc.yaml | 97 +++++++++++++
>>>> .../clock/amlogic,s4-peripherals-clkc.h | 131 ++++++++++++++++++
>>>> 2 files changed, 228 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml
>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml
>>>> new file mode 100644
>>>> index 000000000000..46b969a16a7c
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml
>>>> @@ -0,0 +1,97 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-peripherals-clkc.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Amlogic Meson S serials Peripherals Clock Controller
>>>
>>> As per my understanding, Meson is no longer applicable.
>>> As Neil and Martin suggested in other reviews, the term 'Amlogic' should
>>> be used instead or 'Meson' should be removed altogether.
>>>
>>
>> No. This was all agreed upon a long time ago. Corporate drivers and dtsi are
>> named after this.
>>
>
> Okay, it seems like there may be a misunderstanding here.
> Now might be a good time to ask Neil about the correct behavior.
>
> Neil, could you please provide the specific naming rules for the new
> Amlogic drivers? Where should we use the 'meson' keyword, and where
> should we not use it?
The current goal is to first get rid of meson in the compatiob, which is ok here,
then remove meson in the driver name & function names, and then wherever it's a
nice to have to remove meson in bindings & comments.
So if you where sending a v8, it would be good to remove the Meson in the
bindings description.
Neil
>
>>>> +
>>>> +maintainers:
>>>> + - Neil Armstrong <neil.armstrong at linaro.org>
>>>> + - Jerome Brunet <jbrunet at baylibre.com>
>>>> + - Yu Tu <yu.tu at amlogic.com>
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + const: amlogic,s4-peripherals-clkc
>>>> +
>>>> + reg:
>>>> + maxItems: 1
>>>> +
>>>> + clocks:
>>>> + items:
>>>> + - description: input fixed pll div2
>>>> + - description: input fixed pll div2p5
>>>> + - description: input fixed pll div3
>>>> + - description: input fixed pll div4
>>>> + - description: input fixed pll div5
>>>> + - description: input fixed pll div7
>>>> + - description: input hifi pll
>>>> + - description: input gp0 pll
>>>> + - description: input mpll0
>>>> + - description: input mpll1
>>>> + - description: input mpll2
>>>> + - description: input mpll3
>>>> + - description: input hdmi pll
>>>> + - description: input oscillator (usually at 24MHz)
>>>> + - description: input external 32kHz reference (optional)
>>>> +
>>>> + clock-names:
>>>> + items:
>>>> + - const: fclk_div2
>>>> + - const: fclk_div2p5
>>>> + - const: fclk_div3
>>>> + - const: fclk_div4
>>>> + - const: fclk_div5
>>>> + - const: fclk_div7
>>>> + - const: hifi_pll
>>>> + - const: gp0_pll
>>>> + - const: mpll0
>>>> + - const: mpll1
>>>> + - const: mpll2
>>>> + - const: mpll3
>>>> + - const: hdmi_pll
>>>> + - const: xtal
>>>> + - const: ext_32k
>>>> +
>>>> + "#clock-cells":
>>>> + const: 1
>>>> +
>>>> +required:
>>>> + - compatible
>>>> + - reg
>>>> + - clocks
>>>> + - clock-names
>>>> + - "#clock-cells"
>>>> +
>>>> +additionalProperties: false
>>>> +
>>>> +examples:
>>>> + - |
>>>> + #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
>>>> +
>>>> + clkc_periphs: clock-controller at fe000000 {
>>>> + compatible = "amlogic,s4-peripherals-clkc";
>>>> + reg = <0xfe000000 0x49c>;
>>>
>>> I was under the impression that reg as MMIO address should have four
>>> cells on ARM64 architecture. Are you sure it only needs two cells?
>>
>> Yes. Maybe you can check out the clock file for other yaml.The two cells and
>> four cells all are ok.
>>
>> It's not a problem even in real DTS. How many cells are needed to look at
>> the parent address-cells and size-cells definitions.
>>
>
> AFAIR, it depends on which OF API you will call for retreive address
> and size values (u32 or u64).
>
>>>
>>>> + clocks = <&clkc_pll 3>,
>>>> + <&clkc_pll 13>,
>>>> + <&clkc_pll 5>,
>>>> + <&clkc_pll 7>,
>>>> + <&clkc_pll 9>,
>>>> + <&clkc_pll 11>,
>>>> + <&clkc_pll 17>,
>>>> + <&clkc_pll 15>,
>>>> + <&clkc_pll 25>,
>>>> + <&clkc_pll 27>,
>>>> + <&clkc_pll 29>,
>>>> + <&clkc_pll 31>,
>>>> + <&clkc_pll 20>,
>>>> + <&xtal>,
>>>> + <&ext_32k>;
>>>> + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", "fclk_div4",
>>>> + "fclk_div5", "fclk_div7", "hifi_pll", "gp0_pll",
>>>> + "mpll0", "mpll1", "mpll2", "mpll3", "hdmi_pll", "xtal",
>>>> + "ext_32k";
>>>> + #clock-cells = <1>;
>>>> + };
>>>> +...
>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h
>>>> new file mode 100644
>>>> index 000000000000..073396a76957
>>>> --- /dev/null
>>>> +++ b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h
>>>> @@ -0,0 +1,131 @@
>>>> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
>>>> +/*
>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>>>> + * Author: Yu Tu <yu.tu at amlogic.com>
>>>> + */
>>>> +
>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H
>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H
>>>> +
>>>> +/*
>>>> + * CLKID index values
>>>> + */
>>>> +
>>>> +#define CLKID_RTC_CLK 4
>>>
>>> I believe that the CLK suffix is unnecessary since it is already clear
>>> that the object in question is a clock. Additionally, it is redundant
>>> to use the GATE suffix.
>>
>> No. These prefixes and suffixes are very friendly to the people who write
>> and read the code.
>>
>
> Jerome has already pointed this out in another review for the
> A1 clock driver, there are redundant suffixes:
>
> https://lore.kernel.org/linux-amlogic/1j359y82fn.fsf@starbuckisacylon.baylibre.com/
>
>>>
>>>> +#define CLKID_SYS_CLK_B_GATE 7
>>>> +#define CLKID_SYS_CLK_A_GATE 10
>>>> +#define CLKID_SYS_CLK 11
>>>> +#define CLKID_CECA_32K_CLKOUT 16
>>>> +#define CLKID_CECB_32K_CLKOUT 21
>>>> +#define CLKID_SC_CLK_GATE 24
>>>> +#define CLKID_12_24M_CLK_SEL 27
>>>> +#define CLKID_VID_PLL 30
>>>> +#define CLKID_VCLK 37
>>>> +#define CLKID_VCLK2 38
>>>> +#define CLKID_VCLK_DIV1 39
>>>> +#define CLKID_VCLK2_DIV1 44
>>>> +#define CLKID_VCLK_DIV2 49
>>>> +#define CLKID_VCLK_DIV4 50
>>>> +#define CLKID_VCLK_DIV6 51
>>>> +#define CLKID_VCLK_DIV12 52
>>>> +#define CLKID_VCLK2_DIV2 53
>>>> +#define CLKID_VCLK2_DIV4 54
>>>> +#define CLKID_VCLK2_DIV6 55
>>>> +#define CLKID_VCLK2_DIV12 56
>>>> +#define CLKID_CTS_ENCI 61
>>>> +#define CLKID_CTS_ENCP 62
>>>> +#define CLKID_CTS_VDAC 63
>>>> +#define CLKID_HDMI 67
>>>> +#define CLKID_TS_CLK_GATE 69
>>>> +#define CLKID_MALI_0 72
>>>> +#define CLKID_MALI_1 75
>>>> +#define CLKID_MALI 76
>>>> +#define CLKID_VDEC_P0 79
>>>> +#define CLKID_VDEC_P1 82
>>>> +#define CLKID_VDEC_SEL 83
>>>> +#define CLKID_HEVCF_P0 86
>>>> +#define CLKID_HEVCF_P1 89
>>>> +#define CLKID_HEVCF_SEL 90
>>>> +#define CLKID_VPU_0 93
>>>> +#define CLKID_VPU_1 96
>>>> +#define CLKID_VPU 97
>>>> +#define CLKID_VPU_CLKB_TMP 100
>>>> +#define CLKID_VPU_CLKB 102
>>>> +#define CLKID_VPU_CLKC_P0 105
>>>> +#define CLKID_VPU_CLKC_P1 108
>>>> +#define CLKID_VPU_CLKC_SEL 109
>>>> +#define CLKID_VAPB_0 112
>>>> +#define CLKID_VAPB_1 115
>>>> +#define CLKID_VAPB 116
>>>> +#define CLKID_GE2D 117
>>>> +#define CLKID_VDIN_MEAS_GATE 120
>>>> +#define CLKID_SD_EMMC_C_CLK 123
>>>> +#define CLKID_SD_EMMC_A_CLK 126
>>>> +#define CLKID_SD_EMMC_B_CLK 129
>>>> +#define CLKID_SPICC0_GATE 132
>>>> +#define CLKID_PWM_A_GATE 135
>>>> +#define CLKID_PWM_B_GATE 138
>>>> +#define CLKID_PWM_C_GATE 141
>>>> +#define CLKID_PWM_D_GATE 144
>>>> +#define CLKID_PWM_E_GATE 147
>>>> +#define CLKID_PWM_F_GATE 150
>>>> +#define CLKID_PWM_G_GATE 153
>>>> +#define CLKID_PWM_H_GATE 156
>>>> +#define CLKID_PWM_I_GATE 159
>>>> +#define CLKID_PWM_J_GATE 162
>>>> +#define CLKID_SARADC_GATE 165
>>>> +#define CLKID_GEN_GATE 168
>>>> +#define CLKID_DDR 169
>>>> +#define CLKID_DOS 170
>>>> +#define CLKID_ETHPHY 171
>>>> +#define CLKID_MALI_GATE 172
>>>> +#define CLKID_AOCPU 173
>>>> +#define CLKID_AUCPU 174
>>>> +#define CLKID_CEC 175
>>>> +#define CLKID_SD_EMMC_A 176
>>>> +#define CLKID_SD_EMMC_B 177
>>>> +#define CLKID_NAND 178
>>>> +#define CLKID_SMARTCARD 179
>>>> +#define CLKID_ACODEC 180
>>>> +#define CLKID_SPIFC 181
>>>> +#define CLKID_MSR_CLK 182
>>>> +#define CLKID_IR_CTRL 183
>>>> +#define CLKID_AUDIO 184
>>>> +#define CLKID_ETH 185
>>>> +#define CLKID_UART_A 186
>>>> +#define CLKID_UART_B 187
>>>> +#define CLKID_UART_C 188
>>>> +#define CLKID_UART_D 189
>>>> +#define CLKID_UART_E 190
>>>> +#define CLKID_AIFIFO 191
>>>> +#define CLKID_TS_DDR 192
>>>> +#define CLKID_TS_PLL 193
>>>> +#define CLKID_G2D 194
>>>> +#define CLKID_SPICC0 195
>>>> +#define CLKID_SPICC1 196
>>>> +#define CLKID_USB 197
>>>> +#define CLKID_I2C_M_A 198
>>>> +#define CLKID_I2C_M_B 199
>>>> +#define CLKID_I2C_M_C 200
>>>> +#define CLKID_I2C_M_D 201
>>>> +#define CLKID_I2C_M_E 202
>>>> +#define CLKID_HDMITX_APB 203
>>>> +#define CLKID_I2C_S_A 204
>>>> +#define CLKID_USB1_TO_DDR 205
>>>> +#define CLKID_HDCP22 206
>>>> +#define CLKID_MMC_APB 207
>>>> +#define CLKID_RSA 208
>>>> +#define CLKID_CPU_DEBUG 209
>>>> +#define CLKID_VPU_INTR 210
>>>> +#define CLKID_DEMOD 211
>>>> +#define CLKID_SAR_ADC 212
>>>> +#define CLKID_GIC 213
>>>> +#define CLKID_PWM_AB 214
>>>> +#define CLKID_PWM_CD 215
>>>> +#define CLKID_PWM_EF 216
>>>> +#define CLKID_PWM_GH 217
>>>> +#define CLKID_PWM_IJ 218
>>>> +#define CLKID_HDCP22_ESMCLK_GATE 221
>>>> +#define CLKID_HDCP22_SKPCLK_GATE 224
>>>> +
>>>> +#endif /* _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H */
>>>> --
>>>> 2.33.1
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-amlogic mailing list
>>>> linux-amlogic at lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-amlogic
>>>
>>> --
>>> Thank you,
>>> Dmitry
>
More information about the linux-amlogic
mailing list