[PATCH V7 3/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver
Dmitry Rokosov
ddrokosov at sberdevices.ru
Thu Apr 27 02:11:41 PDT 2023
On Thu, Apr 27, 2023 at 04:38:20PM +0800, Yu Tu wrote:
>
>
> On 2023/4/26 19:13, Dmitry Rokosov wrote:
> > [Some people who received this message don't often get email from ddrokosov at sberdevices.ru. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
> >
> > [ EXTERNAL EMAIL ]
> >
> > On Mon, Apr 17, 2023 at 02:50:04PM +0800, Yu Tu wrote:
> > > Add the S4 PLL clock controller driver in the s4 SoC family.
> > >
> > > Signed-off-by: Yu Tu <yu.tu at amlogic.com>
> > > ---
> > > drivers/clk/meson/Kconfig | 13 +
> > > drivers/clk/meson/Makefile | 1 +
> > > drivers/clk/meson/s4-pll.c | 902 +++++++++++++++++++++++++++++++++++++
> > > drivers/clk/meson/s4-pll.h | 87 ++++
> > > 4 files changed, 1003 insertions(+)
> > > create mode 100644 drivers/clk/meson/s4-pll.c
> > > create mode 100644 drivers/clk/meson/s4-pll.h
> > >
> > > diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> > > index fc002c155bc3..a663c90a3f3b 100644
> > > --- a/drivers/clk/meson/Kconfig
> > > +++ b/drivers/clk/meson/Kconfig
> > > @@ -115,4 +115,17 @@ config COMMON_CLK_G12A
> > > help
> > > Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
> > > devices, aka g12a. Say Y if you want peripherals to work.
> > > +
> > > +config COMMON_CLK_S4_PLL
> > > + tristate "S4 SoC PLL clock controllers support"
> > > + depends on ARM64
> > > + default y
> > > + select COMMON_CLK_MESON_MPLL
> > > + select COMMON_CLK_MESON_PLL
> > > + select COMMON_CLK_MESON_REGMAP
> > > + help
> > > + Support for the pll clock controller on Amlogic S805X2 and S905Y4 devices,
> > > + aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229.
> > > + Say Y if you want the board to work, because plls are the parent of most
> > > + peripherals.
> > > endmenu
> > > diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> > > index 6eca2a406ee3..376f49cc13f1 100644
> > > --- a/drivers/clk/meson/Makefile
> > > +++ b/drivers/clk/meson/Makefile
> > > @@ -19,3 +19,4 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
> > > obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
> > > obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
> > > obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
> > > +obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o
> > > diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c
> > > new file mode 100644
> > > index 000000000000..5a34d304adf7
> > > --- /dev/null
> > > +++ b/drivers/clk/meson/s4-pll.c
> > > @@ -0,0 +1,902 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +/*
> > > + * Amlogic Meson-S4 PLL Clock Controller Driver
> > > + *
> > > + * Copyright (c) 2021 Amlogic, inc.
> > > + * Author: Yu Tu <yu.tu at amlogic.com>
> > > + */
> > > +
> > > +#include <linux/clk-provider.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/platform_device.h>
> > > +
> > > +#include "clk-mpll.h"
> > > +#include "clk-pll.h"
> > > +#include "clk-regmap.h"
> > > +#include "s4-pll.h"
> > > +
> > > +static DEFINE_SPINLOCK(meson_clk_lock);
> > > +
> > > +static struct clk_regmap s4_fixed_pll_dco = {
> > > + .data = &(struct meson_clk_pll_data){
> > > + .en = {
> > > + .reg_off = ANACTRL_FIXPLL_CTRL0,
> > > + .shift = 28,
> > > + .width = 1,
> > > + },
> > > + .m = {
> > > + .reg_off = ANACTRL_FIXPLL_CTRL0,
> > > + .shift = 0,
> > > + .width = 8,
> > > + },
> > > + .n = {
> > > + .reg_off = ANACTRL_FIXPLL_CTRL0,
> > > + .shift = 10,
> > > + .width = 5,
> > > + },
> > > + .frac = {
> > > + .reg_off = ANACTRL_FIXPLL_CTRL1,
> > > + .shift = 0,
> > > + .width = 17,
> > > + },
> > > + .l = {
> > > + .reg_off = ANACTRL_FIXPLL_CTRL0,
> > > + .shift = 31,
> > > + .width = 1,
> > > + },
> > > + .rst = {
> > > + .reg_off = ANACTRL_FIXPLL_CTRL0,
> > > + .shift = 29,
> > > + .width = 1,
> > > + },
> > > + },
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fixed_pll_dco",
> > > + /*
> > > + * This clock is a fixed value (4GHz) that is initialized by ROMcode.
> > > + * This clock won't ever change at runtime.
> > > + * The chip design determines that this clock cannot be changed after
> > > + * initialization. To prevent system crash caused by changing
> > > + * fixed related register in kernel phase. This register is not
> > > + * writable in the kernel phase.
> > > + * So we use ro_ops.
> > > + */
> > > + .ops = &meson_clk_pll_ro_ops,
> > > + .parent_data = (const struct clk_parent_data []) {
> > > + { .fw_name = "xtal", }
> > > + },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_regmap s4_fixed_pll = {
> > > + .data = &(struct clk_regmap_div_data){
> > > + .offset = ANACTRL_FIXPLL_CTRL0,
> > > + .shift = 16,
> > > + .width = 2,
> > > + .flags = CLK_DIVIDER_POWER_OF_TWO,
> > > + },
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fixed_pll",
> > > + /*
> > > + * This clock is a fixed value (2GHz) that is initialized by ROMcode.
> > > + * This clock won't ever change at runtime.
> > > + * The chip design determines that this clock cannot be changed after
> > > + * initialization. To prevent system crash caused by changing
> > > + * fixed related register in kernel phase. This register is not
> > > + * writable in the kernel phase.
> > > + * So we use ro_ops.
> > > + */
> > > + .ops = &clk_regmap_divider_ro_ops,
> > > + .parent_hws = (const struct clk_hw *[]) {
> > > + &s4_fixed_pll_dco.hw
> > > + },
> > > + .num_parents = 1,
> > > + /*
> > > + * This clock won't ever change at runtime so
> > > + * CLK_SET_RATE_PARENT is not required
> > > + */
> > > + },
> > > +};
> > > +
> > > +static struct clk_fixed_factor s4_fclk_div2_div = {
> > > + .mult = 1,
> > > + .div = 2,
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fclk_div2_div",
> > > + .ops = &clk_fixed_factor_ops,
> > > + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_regmap s4_fclk_div2 = {
> > > + .data = &(struct clk_regmap_gate_data){
> > > + .offset = ANACTRL_FIXPLL_CTRL1,
> > > + .bit_idx = 24,
> > > + },
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fclk_div2",
> > > + /*
> > > + * This clock is a fixed value (1GHz) that is initialized by ROMcode.
> > > + * This clock won't ever ungate at runtime.
> > > + * The chip design determines that this clock cannot be changed after
> > > + * initialization. To prevent system crash caused by changing
> > > + * fixed related register in kernel phase. This register is not
> > > + * writable in the kernel phase.
> > > + * So we use ro_ops.
> > > + */
> >
> > The above comment has been copied and pasted many times.
> > Please collapse it and refer to it from specific locations.
>
> Just three times. The goal is to make it clear to the viewer.
>
I think, reference to one time mentioned comment is clear for viewer too.
Also Jerome has pointed to this problem for the A1 driver as well:
https://lore.kernel.org/all/1jtty6o5so.fsf@starbuckisacylon.baylibre.com/
> >
> > > + .ops = &clk_regmap_gate_ro_ops,
> > > + .parent_hws = (const struct clk_hw *[]) {
> > > + &s4_fclk_div2_div.hw
> > > + },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_fixed_factor s4_fclk_div3_div = {
> > > + .mult = 1,
> > > + .div = 3,
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fclk_div3_div",
> > > + .ops = &clk_fixed_factor_ops,
> > > + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_regmap s4_fclk_div3 = {
> > > + .data = &(struct clk_regmap_gate_data){
> > > + .offset = ANACTRL_FIXPLL_CTRL1,
> > > + .bit_idx = 20,
> > > + },
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fclk_div3",
> > > + .ops = &clk_regmap_gate_ro_ops,
> > > + .parent_hws = (const struct clk_hw *[]) {
> > > + &s4_fclk_div3_div.hw
> > > + },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_fixed_factor s4_fclk_div4_div = {
> > > + .mult = 1,
> > > + .div = 4,
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fclk_div4_div",
> > > + .ops = &clk_fixed_factor_ops,
> > > + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_regmap s4_fclk_div4 = {
> > > + .data = &(struct clk_regmap_gate_data){
> > > + .offset = ANACTRL_FIXPLL_CTRL1,
> > > + .bit_idx = 21,
> > > + },
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fclk_div4",
> > > + .ops = &clk_regmap_gate_ro_ops,
> > > + .parent_hws = (const struct clk_hw *[]) {
> > > + &s4_fclk_div4_div.hw
> > > + },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_fixed_factor s4_fclk_div5_div = {
> > > + .mult = 1,
> > > + .div = 5,
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fclk_div5_div",
> > > + .ops = &clk_fixed_factor_ops,
> > > + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_regmap s4_fclk_div5 = {
> > > + .data = &(struct clk_regmap_gate_data){
> > > + .offset = ANACTRL_FIXPLL_CTRL1,
> > > + .bit_idx = 22,
> > > + },
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fclk_div5",
> > > + .ops = &clk_regmap_gate_ro_ops,
> > > + .parent_hws = (const struct clk_hw *[]) {
> > > + &s4_fclk_div5_div.hw
> > > + },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_fixed_factor s4_fclk_div7_div = {
> > > + .mult = 1,
> > > + .div = 7,
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fclk_div7_div",
> > > + .ops = &clk_fixed_factor_ops,
> > > + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_regmap s4_fclk_div7 = {
> > > + .data = &(struct clk_regmap_gate_data){
> > > + .offset = ANACTRL_FIXPLL_CTRL1,
> > > + .bit_idx = 23,
> > > + },
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fclk_div7",
> > > + .ops = &clk_regmap_gate_ro_ops,
> > > + .parent_hws = (const struct clk_hw *[]) {
> > > + &s4_fclk_div7_div.hw
> > > + },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_fixed_factor s4_fclk_div2p5_div = {
> > > + .mult = 2,
> > > + .div = 5,
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fclk_div2p5_div",
> > > + .ops = &clk_fixed_factor_ops,
> > > + .parent_hws = (const struct clk_hw *[]) {
> > > + &s4_fixed_pll.hw
> > > + },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_regmap s4_fclk_div2p5 = {
> > > + .data = &(struct clk_regmap_gate_data){
> > > + .offset = ANACTRL_FIXPLL_CTRL1,
> > > + .bit_idx = 25,
> > > + },
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "fclk_div2p5",
> > > + .ops = &clk_regmap_gate_ro_ops,
> > > + .parent_hws = (const struct clk_hw *[]) {
> > > + &s4_fclk_div2p5_div.hw
> > > + },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static const struct pll_mult_range s4_gp0_pll_mult_range = {
> > > + .min = 125,
> > > + .max = 250,
> > > +};
> > > +
> > > +/*
> > > + * Internal gp0 pll emulation configuration parameters
> > > + */
> > > +static const struct reg_sequence s4_gp0_init_regs[] = {
> > > + { .reg = ANACTRL_GP0PLL_CTRL1, .def = 0x00000000 },
> > > + { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x00000000 },
> > > + { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x48681c00 },
> > > + { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x88770290 },
> > > + { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x39272000 },
> > > + { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x56540000 }
> >
> > Please ensure that the initialization sequence values do not overlap
> > with the below pll_data bits that are managed during runtime.
> >
>
> That's right. There is a timing requirement for PLL initialization.
>
Okay, we have already discussed this in another patch series for A1 clock
drivers, and some overlaps were found.
I just want to help you find potential problems.
You can find the discussion here:
https://lore.kernel.org/linux-amlogic/1jr0u2azfi.fsf@starbuckisacylon.baylibre.com/
> > > +};
> > > +
> > > +static struct clk_regmap s4_gp0_pll_dco = {
> > > + .data = &(struct meson_clk_pll_data){
> > > + .en = {
> > > + .reg_off = ANACTRL_GP0PLL_CTRL0,
> > > + .shift = 28,
> > > + .width = 1,
> > > + },
> > > + .m = {
> > > + .reg_off = ANACTRL_GP0PLL_CTRL0,
> > > + .shift = 0,
> > > + .width = 8,
> > > + },
> > > + .n = {
> > > + .reg_off = ANACTRL_GP0PLL_CTRL0,
> > > + .shift = 10,
> > > + .width = 5,
> > > + },
> > > + .frac = {
> > > + .reg_off = ANACTRL_GP0PLL_CTRL1,
> > > + .shift = 0,
> > > + .width = 17,
> > > + },
> > > + .l = {
> > > + .reg_off = ANACTRL_GP0PLL_CTRL0,
> > > + .shift = 31,
> > > + .width = 1,
> > > + },
> > > + .rst = {
> > > + .reg_off = ANACTRL_GP0PLL_CTRL0,
> > > + .shift = 29,
> > > + .width = 1,
> > > + },
> > > + .range = &s4_gp0_pll_mult_range,
> > > + .init_regs = s4_gp0_init_regs,
> > > + .init_count = ARRAY_SIZE(s4_gp0_init_regs),
> > > + },
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "gp0_pll_dco",
> > > + .ops = &meson_clk_pll_ops,
> > > + .parent_data = (const struct clk_parent_data []) {
> > > + { .fw_name = "xtal", }
> > > + },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_regmap s4_gp0_pll = {
> > > + .data = &(struct clk_regmap_div_data){
> > > + .offset = ANACTRL_GP0PLL_CTRL0,
> > > + .shift = 16,
> > > + .width = 3,
> > > + .flags = (CLK_DIVIDER_POWER_OF_TWO |
> > > + CLK_DIVIDER_ROUND_CLOSEST),
> > > + },
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "gp0_pll",
> > > + .ops = &clk_regmap_divider_ops,
> > > + .parent_hws = (const struct clk_hw *[]) {
> > > + &s4_gp0_pll_dco.hw
> > > + },
> > > + .num_parents = 1,
> > > + .flags = CLK_SET_RATE_PARENT,
> > > + },
> > > +};
> > > +
> > > +/*
> > > + * Internal hifi pll emulation configuration parameters
> > > + */
> > > +static const struct reg_sequence s4_hifi_init_regs[] = {
> > > + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x00010e56 },
> > > + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 },
> > > + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a285c00 },
> > > + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 },
> > > + { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x39272000 },
> > > + { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x56540000 }
> > > +};
> >
> > Please ensure that the initialization sequence values do not overlap
> > with the below pll_data bits that are managed during runtime.
>
> [...]
>
> >
> > > +
> > > +static struct clk_regmap s4_hifi_pll_dco = {
> > > + .data = &(struct meson_clk_pll_data){
> > > + .en = {
> > > + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> > > + .shift = 28,
> > > + .width = 1,
> > > + },
> > > + .m = {
> > > + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> > > + .shift = 0,
> > > + .width = 8,
> > > + },
> > > + .n = {
> > > + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> > > + .shift = 10,
> > > + .width = 5,
> > > + },
> > > + .frac = {
> > > + .reg_off = ANACTRL_HIFIPLL_CTRL1,
> > > + .shift = 0,
> > > + .width = 17,
> > > + },
> > > + .l = {
> > > + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> > > + .shift = 31,
> > > + .width = 1,
> > > + },
> > > + .rst = {
> > > + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> > > + .shift = 29,
> > > + .width = 1,
> > > + },
> > > + .range = &s4_gp0_pll_mult_range,
> > > + .init_regs = s4_hifi_init_regs,
> > > + .init_count = ARRAY_SIZE(s4_hifi_init_regs),
> > > + .flags = CLK_MESON_PLL_ROUND_CLOSEST,
> > > + },
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "hifi_pll_dco",
> > > + .ops = &meson_clk_pll_ops,
> > > + .parent_data = (const struct clk_parent_data []) {
> > > + { .fw_name = "xtal", }
> > > + },
> > > + .num_parents = 1,
> > > + },
> > > +};
> > > +
> > > +static struct clk_regmap s4_hifi_pll = {
> > > + .data = &(struct clk_regmap_div_data){
> > > + .offset = ANACTRL_HIFIPLL_CTRL0,
> > > + .shift = 16,
> > > + .width = 2,
> > > + .flags = (CLK_DIVIDER_POWER_OF_TWO |
> > > + CLK_DIVIDER_ROUND_CLOSEST),
> > > + },
> > > + .hw.init = &(struct clk_init_data){
> > > + .name = "hifi_pll",
> > > + .ops = &clk_regmap_divider_ops,
> > > + .parent_hws = (const struct clk_hw *[]) {
> > > + &s4_hifi_pll_dco.hw
> > > + },
> > > + .num_parents = 1,
> > > + .flags = CLK_SET_RATE_PARENT,
> > > + },
> > > +};
> > > +
> >
> > [...]
> >
> > > +static int meson_s4_pll_probe(struct platform_device *pdev)
> > > +{
> > > + struct device *dev = &pdev->dev;
> > > + struct regmap *regmap;
> > > + void __iomem *base;
> > > + int ret, i;
> > > +
> > > + base = devm_platform_ioremap_resource(pdev, 0);
> > > + if (IS_ERR(base))
> > > + return PTR_ERR(base);
> > > +
> > > + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
> > > + if (IS_ERR(regmap))
> > > + return PTR_ERR(regmap);
> > > +
> > > + ret = regmap_multi_reg_write(regmap, s4_init_regs, ARRAY_SIZE(s4_init_regs));
> > > + if (ret) {
> > > + dev_err(dev, "Failed to init registers\n");
> >
> > dev_err_probe()
>
> Clock drivers are the foundation on which other drivers run. There is no
> need to EPROBE_DEFER. Also use EPROBE_DEFER as long as it is better to use
> when getting the resource.
>
At least you are requesting the ioremap resource, right? :-)
And clock driver has tristate config, so can be built as module.
> >
> > > + return ret;
> > > + }
> > > +
> > > + /* Populate regmap for the regmap backed clocks */
> > > + for (i = 0; i < ARRAY_SIZE(s4_pll_clk_regmaps); i++)
> > > + s4_pll_clk_regmaps[i]->map = regmap;
> > > +
> > > + for (i = 0; i < s4_pll_hw_onecell_data.num; i++) {
> > > + /* array might be sparse */
> > > + if (!s4_pll_hw_onecell_data.hws[i])
> > > + continue;
> > > +
> > > + ret = devm_clk_hw_register(dev, s4_pll_hw_onecell_data.hws[i]);
> > > + if (ret) {
> > > + dev_err(dev, "Clock registration failed\n");
> >
> > dev_err_probe()
>
> [...]
>
> >
> > > + return ret;
> > > + }
> > > + }
> > > +
> > > + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> > > + &s4_pll_hw_onecell_data);
> > > +}
> > > +
> > > +static const struct of_device_id clkc_match_table[] = {
> > > + {
> > > + .compatible = "amlogic,s4-pll-clkc",
> > > + },
> > > + {}
> > > +};
> > > +
> > > +static struct platform_driver s4_driver = {
> > > + .probe = meson_s4_pll_probe,
> > > + .driver = {
> > > + .name = "s4-pll-clkc",
> > > + .of_match_table = clkc_match_table,
> > > + },
> > > +};
> > > +
> > > +module_platform_driver(s4_driver);
> > > +MODULE_LICENSE("GPL");
> > > diff --git a/drivers/clk/meson/s4-pll.h b/drivers/clk/meson/s4-pll.h
> > > new file mode 100644
> > > index 000000000000..1fb5bececf5f
> > > --- /dev/null
> > > +++ b/drivers/clk/meson/s4-pll.h
> > > @@ -0,0 +1,87 @@
> > > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> > > +/*
> > > + * Copyright (c) 2021 Amlogic, inc.
> > > + * Author: Yu Tu <yu.tu at amlogic.com>
> > > + */
> > > +
> > > +#ifndef __MESON_S4_PLL_H__
> > > +#define __MESON_S4_PLL_H__
> > > +
> > > +/* ANA_CTRL - Registers */
> > > +
> > > +#define ANACTRL_FIXPLL_CTRL0 0x040
> > > +#define ANACTRL_FIXPLL_CTRL1 0x044
> > > +#define ANACTRL_FIXPLL_CTRL2 0x048
> > > +#define ANACTRL_FIXPLL_CTRL3 0x04c
> > > +#define ANACTRL_FIXPLL_CTRL4 0x050
> > > +#define ANACTRL_FIXPLL_CTRL5 0x054
> > > +#define ANACTRL_FIXPLL_CTRL6 0x058
> > > +#define ANACTRL_FIXPLL_STS 0x05c
> > > +#define ANACTRL_GP0PLL_CTRL0 0x080
> > > +#define ANACTRL_GP0PLL_CTRL1 0x084
> > > +#define ANACTRL_GP0PLL_CTRL2 0x088
> > > +#define ANACTRL_GP0PLL_CTRL3 0x08c
> > > +#define ANACTRL_GP0PLL_CTRL4 0x090
> > > +#define ANACTRL_GP0PLL_CTRL5 0x094
> > > +#define ANACTRL_GP0PLL_CTRL6 0x098
> > > +#define ANACTRL_GP0PLL_STS 0x09c
> > > +#define ANACTRL_HIFIPLL_CTRL0 0x100
> > > +#define ANACTRL_HIFIPLL_CTRL1 0x104
> > > +#define ANACTRL_HIFIPLL_CTRL2 0x108
> > > +#define ANACTRL_HIFIPLL_CTRL3 0x10c
> > > +#define ANACTRL_HIFIPLL_CTRL4 0x110
> > > +#define ANACTRL_HIFIPLL_CTRL5 0x114
> > > +#define ANACTRL_HIFIPLL_CTRL6 0x118
> > > +#define ANACTRL_HIFIPLL_STS 0x11c
> > > +#define ANACTRL_MPLL_CTRL0 0x180
> > > +#define ANACTRL_MPLL_CTRL1 0x184
> > > +#define ANACTRL_MPLL_CTRL2 0x188
> > > +#define ANACTRL_MPLL_CTRL3 0x18c
> > > +#define ANACTRL_MPLL_CTRL4 0x190
> > > +#define ANACTRL_MPLL_CTRL5 0x194
> > > +#define ANACTRL_MPLL_CTRL6 0x198
> > > +#define ANACTRL_MPLL_CTRL7 0x19c
> > > +#define ANACTRL_MPLL_CTRL8 0x1a0
> > > +#define ANACTRL_MPLL_STS 0x1a4
> > > +#define ANACTRL_HDMIPLL_CTRL0 0x1c0
> > > +#define ANACTRL_HDMIPLL_CTRL1 0x1c4
> > > +#define ANACTRL_HDMIPLL_CTRL2 0x1c8
> > > +#define ANACTRL_HDMIPLL_CTRL3 0x1cc
> > > +#define ANACTRL_HDMIPLL_CTRL4 0x1d0
> > > +#define ANACTRL_HDMIPLL_CTRL5 0x1d4
> > > +#define ANACTRL_HDMIPLL_CTRL6 0x1d8
> > > +#define ANACTRL_HDMIPLL_STS 0x1dc
> > > +#define ANACTRL_HDMIPLL_VLOCK 0x1e4
> > > +
> > > +/*
> > > + * CLKID index values
> > > + *
> > > + * These indices are entirely contrived and do not map onto the hardware.
> > > + * It has now been decided to expose everything by default in the DT header:
> > > + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
> >
> > axg-clkc.h?
>
> I will correct.
>
> >
> > > + * to expose, such as the internal muxes and dividers of composite clocks,
> > > + * will remain defined here.
> > > + */
> > > +#define CLKID_FIXED_PLL_DCO 0
> > > +#define CLKID_FCLK_DIV2_DIV 2
> > > +#define CLKID_FCLK_DIV3_DIV 4
> > > +#define CLKID_FCLK_DIV4_DIV 6
> > > +#define CLKID_FCLK_DIV5_DIV 8
> > > +#define CLKID_FCLK_DIV7_DIV 10
> > > +#define CLKID_FCLK_DIV2P5_DIV 12
> > > +#define CLKID_GP0_PLL_DCO 14
> > > +#define CLKID_HIFI_PLL_DCO 16
> > > +#define CLKID_HDMI_PLL_DCO 18
> > > +#define CLKID_HDMI_PLL_OD 19
> > > +#define CLKID_MPLL_50M_DIV 21
> > > +#define CLKID_MPLL_PREDIV 23
> > > +#define CLKID_MPLL0_DIV 24
> > > +#define CLKID_MPLL1_DIV 26
> > > +#define CLKID_MPLL2_DIV 28
> > > +#define CLKID_MPLL3_DIV 30
> > > +
> > > +#define NR_PLL_CLKS 32
> > > +/* include the CLKIDs that have been made part of the DT binding */
> > > +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
> > > +
> > > +#endif /* __MESON_S4_PLL_H__ */
> > > --
> > > 2.33.1
> > >
> > >
> > > _______________________________________________
> > > linux-amlogic mailing list
> > > linux-amlogic at lists.infradead.org
> > > http://lists.infradead.org/mailman/listinfo/linux-amlogic
> >
> > --
> > Thank you,
> > Dmitry
--
Thank you,
Dmitry
More information about the linux-amlogic
mailing list