[PATCH V3 3/6] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver

Jerome Brunet jbrunet at baylibre.com
Wed Sep 28 08:27:07 PDT 2022


On Wed 21 Sep 2022 at 16:40, Yu Tu <yu.tu at amlogic.com> wrote:

> Hi Jerome,
>
> On 2022/8/30 15:37, Yu Tu wrote:
>> On 2022/8/30 14:44, Jerome Brunet wrote:
>>> [ EXTERNAL EMAIL ]
>>>
>>>
>>> On Tue 30 Aug 2022 at 14:13, Yu Tu <yu.tu at amlogic.com> wrote:
>>>
>>>> On 2022/8/29 17:48, Jerome Brunet wrote:
>>>>> [ EXTERNAL EMAIL ]
>>>>> On Mon 15 Aug 2022 at 21:20, Yu Tu <yu.tu at amlogic.com> wrote:
>>>>>
>>>>>>>>> +
>>>>>>>>> +static struct clk_regmap s4_hdmi_pll_dco = {
>>>>>>>>> +    .data = &(struct meson_clk_pll_data){
>>>>>>>>> +        .en = {
>>>>>>>>> +            .reg_off = ANACTRL_HDMIPLL_CTRL0,
>>>>>>>>> +            .shift   = 28,
>>>>>>>>> +            .width   = 1,
>>>>>>>>> +        },
>>>>>>>>> +        .m = {
>>>>>>>>> +            .reg_off = ANACTRL_HDMIPLL_CTRL0,
>>>>>>>>> +            .shift   = 0,
>>>>>>>>> +            .width   = 8,
>>>>>>>>> +        },
>>>>>>>>> +        .n = {
>>>>>>>>> +            .reg_off = ANACTRL_HDMIPLL_CTRL0,
>>>>>>>>> +            .shift   = 10,
>>>>>>>>> +            .width   = 5,
>>>>>>>>> +        },
>>>>>>>>> +        .frac = {
>>>>>>>>> +            .reg_off = ANACTRL_HDMIPLL_CTRL1,
>>>>>>>>> +            .shift   = 0,
>>>>>>>>> +            .width   = 17,
>>>>>>>>> +        },
>>>>>>>>> +        .l = {
>>>>>>>>> +            .reg_off = ANACTRL_HDMIPLL_CTRL0,
>>>>>>>>> +            .shift   = 31,
>>>>>>>>> +            .width   = 1,
>>>>>>>>> +        },
>>>>>>>>> +        .rst = {
>>>>>>>>> +            .reg_off = ANACTRL_HDMIPLL_CTRL0,
>>>>>>>>> +            .shift   = 29,
>>>>>>>>> +            .width   = 1,
>>>>>>>>> +        },
>>>>>>>>> +    },
>>>>>>>>> +    .hw.init = &(struct clk_init_data){
>>>>>>>>> +        .name = "hdmi_pll_dco",
>>>>>>>>> +        .ops = &meson_clk_pll_ro_ops,
>>>>>>>>> +        .parent_data = (const struct clk_parent_data []) {
>>>>>>>>> +            { .fw_name = "xtal", }
>>>>>>>>> +        },
>>>>>>>>> +        .num_parents = 1,
>>>>>>>>> +        /*
>>>>>>>>> +         * Display directly handle hdmi pll registers ATM, we need
>>>>>>>>> +         * NOCACHE to keep our view of the clock as accurate as
>>>>>>>>> +         * possible
>>>>>>>>> +         */
>>>>>>>>
>>>>>>>> Is it really ?
>>>>>>>>
>>>>>>>> Given that HDMI support for the s4 is there yet, the
>>>>>>>> addresses have changes and the region is no longer a syscon, it is
>>>>>>>> time
>>>>>>>> for the HDMI driver to get fixed.
>>>>>> The HDMI PLL is configured in the Uboot phase and does not change the
>>>>>> frequency in the kernel phase. So we use the NOCACHE flag and
>>>>>> "ro_ops".
>>>>> That's no reason to put NOCACHE or ro-ops
>>>>> If you want the frequencies to be statically assinged, the correct way
>>>>> would be through assigned-rate in DT I guess.
>>>>
>>>> Okay. You're right. However, when registering with OPS, HDMI PLL will be
>>>> reset. It takes time for PLL to stabilize the output frequency, which
>>>> will
>>>> lead to the startup screen flashing.
>>>>
>>>> I would like to know how to solve this problem if not using ro_ops.
>>>>
>>>>>
>>>
>>> You can add new ops or tweak the current init function.
>> HDMI PLL is not different from other PLLS, so I think adding OPS is
>> weird.
>> 
>>>
>>> Safest would be to do the following :
>>>   * Check if the PLLs is already on.
>>>   * Check if the 'pll->init_regs' matches what is already set
>>>     - if so, you can skip the reset
>>>     - if not, you need to reset as usual
>> static int meson_clk_pll_init(struct clk_hw *hw)
>> {
>>          struct clk_regmap *clk = to_clk_regmap(hw);
>>          struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
>>          if (pll->init_count) {
>>                  meson_parm_write(clk->map, &pll->rst, 1);
>>                  regmap_multi_reg_write(clk->map, pll->init_regs,
>>                                  |      pll->init_count);
>>                  meson_parm_write(clk->map, &pll->rst, 0);
>>          }
>>          return 0;
>> }
>> Because the init function looks like this. Therefore, HDMI PLL init_count
>> is not given.

I don't get the remark. You've got pll->init_count right there.

>> Can I change it like this?

What change ? The function above looks a lot like  meson_clk_pll_init()
in the actual source

>
> I don't know if this change meets your requirements? Please give us your
> valuable advice.

What change ?


More information about the linux-amlogic mailing list