[PATCH 03/15] iio: adc: axp288_adc: do not use internal iio_dev lock

Jonathan Cameron jic23 at kernel.org
Sat Sep 24 08:23:29 PDT 2022


On Wed, 21 Sep 2022 11:07:50 +0200
Nuno Sá <noname.nuno at gmail.com> wrote:

> On Tue, 2022-09-20 at 18:12 +0300, Andy Shevchenko wrote:
> > On Tue, Sep 20, 2022 at 4:46 PM Sa, Nuno <Nuno.Sa at analog.com> wrote:  
> > > > -----Original Message-----
> > > > From: Andy Shevchenko <andy.shevchenko at gmail.com>
> > > > Sent: Tuesday, September 20, 2022 3:39 PM
> > > > On Tue, Sep 20, 2022 at 4:37 PM Andy Shevchenko
> > > > <andy.shevchenko at gmail.com> wrote:  
> > > > > On Tue, Sep 20, 2022 at 4:18 PM Sa, Nuno <Nuno.Sa at analog.com>
> > > > > wrote:  
> > > > > > > On Tue, Sep 20, 2022 at 2:28 PM Nuno Sá
> > > > > > > <nuno.sa at analog.com>  
> > > > wrote:
> > > > 
> > > > ...
> > > >   
> > > > > > > >         info = iio_priv(indio_dev);
> > > > > > > > +       mutex_init(&info->lock);
> > > > > > > >         info->irq = platform_get_irq(pdev, 0);
> > > > > > > >         if (info->irq < 0)
> > > > > > > >                 return info->irq;  
> > > > > > > 
> > > > > > > Consider initializing it as late as possible, like after
> > > > > > > IRQ retrieval
> > > > > > > in this context (maybe even deeper, but no context
> > > > > > > available). Ditto
> > > > > > > for the rest of the series.  
> > > > > > 
> > > > > > Any special reason for it (maybe related to lockdep
> > > > > > :wondering: ) ? Just
> > > > > > curious as I never noticed such a pattern when initializing
> > > > > > mutexes.  
> > > > > 
> > > > > Yes. Micro-optimization based on the rule "don't create a
> > > > > resource in
> > > > > case of known error".
> > > > > 
> > > > > OTOH, you have to be sure that the mutex (and generally
> > > > > speaking a
> > > > > locking) should be initialized early enough.  
> > > 
> > > Typically not really needed during probe...  
> > 
> > Actually as long as you expose the ABI to the user anything can
> > happen, means that your code should be ready to receive the requests
> > in any possible callbacks / file ops. Same applies to the IRQ
> > handler.
> > So it's very important to initialize locking just in time. Hence I
> > can
> > say that "typically it needs to be carefully placed".
> >   
> 
> Yes, I'm aware of that... For some reason I just thought about code
> paths directly on probe. Anyways, hopefully these drivers mostly do the
> right thing and register the IIO device as late as possible (ideally
> the last thing to be done). The same goes for IRQs and for IIO, when
> used as part of triggered buffering, the lock is often only used in the
> trigger handler which means it's only reachable after the ABI is
> exposed... 

Can't say I feel that strongly about a mutex_init() placement, but
no harm in moving them later - indeed before the iio_device_register()
should be correct - though care needed as might be some unnecessary locks
taken in probe because of code sharing (and them previously being harmless)

Jonathan
> 
> - Nuno Sá
> > >   




More information about the linux-amlogic mailing list