[PATCH 02/15] iio: adc: ad799x: do not use internal iio_dev lock

Jonathan Cameron jic23 at kernel.org
Sat Sep 24 07:45:17 PDT 2022


On Tue, 20 Sep 2022 13:28:08 +0200
Nuno Sá <nuno.sa at analog.com> wrote:

> 'mlock' was being grabbed when setting the device frequency. In order to
> not introduce any functional change a new lock is added. With that in
> mind, the lock also needs to be grabbed in the places where 'mlock' is.

The usage in here is an example of why we originally decided to take mlock
private...  Annoying hard to reason about.  One key thing this description
doesn't mention is protection of st->config vs device state and I think
the original usage of mlock is partly intended to protect that.

Upshot is I'm not confident enough on this one to be happy taking it without
more head scratching or some review from others!

> 
> On the other places the lock was being used, we can just drop
> it since we are only doing one i2c bus read/write which is already
> safe.
> 
> Signed-off-by: Nuno Sá <nuno.sa at analog.com>

> ---
>  drivers/iio/adc/ad799x.c | 18 ++++++++++++------
>  1 file changed, 12 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
> index 262bd7665b33..838ba8e77de1 100644
> --- a/drivers/iio/adc/ad799x.c
> +++ b/drivers/iio/adc/ad799x.c
> @@ -28,6 +28,7 @@
>  #include <linux/types.h>
>  #include <linux/err.h>
>  #include <linux/module.h>
> +#include <linux/mutex.h>
>  #include <linux/bitops.h>
>  
>  #include <linux/iio/iio.h>
> @@ -125,6 +126,8 @@ struct ad799x_state {
>  	const struct ad799x_chip_config	*chip_config;
>  	struct regulator		*reg;
>  	struct regulator		*vref;
> +	/* lock to protect against multiple access to the device */
> +	struct mutex			lock;
>  	unsigned			id;
>  	u16				config;
>  
> @@ -290,7 +293,9 @@ static int ad799x_read_raw(struct iio_dev *indio_dev,
>  		ret = iio_device_claim_direct_mode(indio_dev);
>  		if (ret)
>  			return ret;
> +		mutex_lock(&st->lock);

If we claim direct mode for the frequency writing we'll avoid racing with
buffers being enabled or other sysfs accesses that are claiming direct mode.

That made me think we could drop the lock, but the argument gets tricker
around st->config which is used in ad799x_scan_direct() and modified
in write_event_config() in a fashion that means it could be out of sync.
I'm not sure that matters but it is getting hard to reason about.


>  		ret = ad799x_scan_direct(st, chan->scan_index);
> +		mutex_unlock(&st->lock);
>  		iio_device_release_direct_mode(indio_dev);
>  
>  		if (ret < 0)
> @@ -351,7 +356,8 @@ static ssize_t ad799x_write_frequency(struct device *dev,
>  	if (ret)
>  		return ret;
>  
> -	mutex_lock(&indio_dev->mlock);
> +	mutex_lock(&st->lock);
> +
>  	ret = i2c_smbus_read_byte_data(st->client, AD7998_CYCLE_TMR_REG);
>  	if (ret < 0)
>  		goto error_ret_mutex;
> @@ -373,7 +379,7 @@ static ssize_t ad799x_write_frequency(struct device *dev,
>  	ret = len;
>  
>  error_ret_mutex:
> -	mutex_unlock(&indio_dev->mlock);
> +	mutex_unlock(&st->lock);
>  
>  	return ret;
>  }
> @@ -407,6 +413,8 @@ static int ad799x_write_event_config(struct iio_dev *indio_dev,
>  	if (ret)
>  		return ret;
>  
> +	mutex_lock(&st->lock);
> +
I think you do need the lock here and in other places where you want to ensure the
st->config state matches that of the device.

>  	if (state)
>  		st->config |= BIT(chan->scan_index) << AD799X_CHANNEL_SHIFT;
>  	else
> @@ -418,6 +426,7 @@ static int ad799x_write_event_config(struct iio_dev *indio_dev,
>  		st->config &= ~AD7998_ALERT_EN;
>  
>  	ret = ad799x_write_config(st, st->config);
> +	mutex_unlock(&st->lock);
>  	iio_device_release_direct_mode(indio_dev);
>  	return ret;
>  }
> @@ -454,11 +463,9 @@ static int ad799x_write_event_value(struct iio_dev *indio_dev,
>  	if (val < 0 || val > GENMASK(chan->scan_type.realbits - 1, 0))
>  		return -EINVAL;
>  
> -	mutex_lock(&indio_dev->mlock);
>  	ret = i2c_smbus_write_word_swapped(st->client,
>  		ad799x_threshold_reg(chan, dir, info),
>  		val << chan->scan_type.shift);
> -	mutex_unlock(&indio_dev->mlock);
>  
>  	return ret;
>  }
> @@ -473,10 +480,8 @@ static int ad799x_read_event_value(struct iio_dev *indio_dev,
>  	int ret;
>  	struct ad799x_state *st = iio_priv(indio_dev);
>  
> -	mutex_lock(&indio_dev->mlock);
>  	ret = i2c_smbus_read_word_swapped(st->client,
>  		ad799x_threshold_reg(chan, dir, info));
> -	mutex_unlock(&indio_dev->mlock);
>  	if (ret < 0)
>  		return ret;
>  	*val = (ret >> chan->scan_type.shift) &
> @@ -785,6 +790,7 @@ static int ad799x_probe(struct i2c_client *client,
>  		return -ENOMEM;
>  
>  	st = iio_priv(indio_dev);
> +	mutex_init(&st->lock);
>  	/* this is only used for device removal purposes */
>  	i2c_set_clientdata(client, indio_dev);
>  




More information about the linux-amlogic mailing list