[PATCH RESEND v8 4/5] dt-bindings: nand: meson: convert txt to yaml

Liang Yang liang.yang at amlogic.com
Wed Sep 7 00:45:51 PDT 2022


Hi Rob,

On 2022/9/6 22:30, Rob Herring wrote:
> [ EXTERNAL EMAIL ]
> 
> On Tue, Sep 06, 2022 at 02:00:32PM +0800, Liang Yang wrote:
>> convert the amlogic,meson-name.txt to amlogic,meson-nand.yaml
>>
>> Signed-off-by: Liang Yang <liang.yang at amlogic.com>
>> ---
>>   .../bindings/mtd/amlogic,meson-nand.txt       | 55 ------------
>>   .../bindings/mtd/amlogic,meson-nand.yaml      | 88 +++++++++++++++++++
>>   2 files changed, 88 insertions(+), 55 deletions(-)
>>   delete mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>>   create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> deleted file mode 100644
>> index 5d5cdfef417f..000000000000
>> --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> +++ /dev/null
>> @@ -1,55 +0,0 @@
>> -Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
>> -
>> -This file documents the properties in addition to those available in
>> -the MTD NAND bindings.
>> -
>> -Required properties:
>> -- compatible : contains one of:
>> -  - "amlogic,meson-gxl-nfc"
>> -  - "amlogic,meson-axg-nfc"
>> -
>> -- reg        : Offset and length of the register set
>> -
>> -- reg-names  : "nfc" is the register set for NFC controller and "emmc"
>> -		is the register set for MCI controller.
>> -
>> -- clocks     :
>> -	A list of phandle + clock-specifier pairs for the clocks listed
>> -	in clock-names.
>> -
>> -- clock-names: Should contain the following:
>> -	"core" - NFC module gate clock
>> -	"device" - parent clock for internal NFC
>> -
>> -Optional children nodes:
>> -Children nodes represent the available nand chips.
>> -
>> -Other properties:
>> -see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
>> -
>> -Example demonstrate on AXG SoC:
>> -
>> -	nand-controller at 7800 {
>> -		compatible = "amlogic,meson-axg-nfc";
>> -		reg = <0x0 0x7800 0x0 0x100>,
>> -		      <0x0 0x7000 0x0 0x800>;
>> -		reg-names = "nfc", "emmc";
>> -		#address-cells = <1>;
>> -		#size-cells = <0>;
>> -		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>> -
>> -		clocks = <&clkc CLKID_SD_EMMC_C>,
>> -			 <&clkc CLKID_FCLK_DIV2>;
>> -		clock-names = "core", "device";
>> -
>> -		pinctrl-names = "default";
>> -		pinctrl-0 = <&nand_pins>;
>> -
>> -		nand at 0 {
>> -			reg = <0>;
>> -			#address-cells = <1>;
>> -			#size-cells = <1>;
>> -
>> -			nand-on-flash-bbt;
>> -		};
>> -	};
>> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> new file mode 100644
>> index 000000000000..42634e9c0d3c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> @@ -0,0 +1,88 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/mtd/amlogic,meson-nand.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
>> +
>> +allOf:
>> +  - $ref: "nand-controller.yaml"
> 
> Don't need quotes
I will fix it
> 
>> +
>> +maintainers:
>> +  - liang.yang at amlogic.com
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - "amlogic,meson-gxl-nfc"
>> +      - "amlogic,meson-axg-nfc"
> 
> Don't need quotes
i will fix it
> 
>> +
>> +  reg:
>> +    maxItems: 2
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    minItems: 2
>> +
>> +  clock-names:
>> +    items:
>> +      - const: core
>> +      - const: device
>> +
>> +patternProperties:
>> +  "^nand@[0-7]$":
>> +    type: object
>> +    properties:
>> +      reg:
>> +        minimum: 0
>> +        maximum: 1
>> +
>> +      nand-ecc-mode:
>> +        const: hw
>> +
>> +      nand-ecc-step-size:
>> +        const: 1024
>> +
>> +      nand-ecc-strength:
>> +        enum: [8, 16, 24, 30, 40, 50, 60]
>> +        description: |
>> +          The ECC configurations that can be supported are as follows.
>> +            meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
>> +            meson-axg-nfc 8
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +  - clocks
>> +  - clock-names
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/clock/axg-clkc.h>
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    nand-controller at ffe07800 {
>> +      compatible = "amlogic,meson-axg-nfc";
>> +      reg = <0xffe07800 0x100>, <0xffe07000 0x800>;
>> +      reg-names = "nfc", "emmc";
>> +      interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>> +      clocks = <&clkc CLKID_SD_EMMC_C>,  <&clkc CLKID_FCLK_DIV2>;
>> +      clock-names = "core", "device";
>> +
>> +      pinctrl-0 = <&nand_pins>;
>> +      pinctrl-names = "default";
>> +
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +
>> +      nand at 0 {
>> +        reg = <0>;
>> +      };
>> +    };
>> +
>> +...
>> -- 
>> 2.34.1
>>
>>
> 
> .



More information about the linux-amlogic mailing list