[PATCH v6 1/4] perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver

Neil Armstrong narmstrong at baylibre.com
Mon Sep 5 00:15:15 PDT 2022


On 01/09/2022 04:45, Jiucheng Xu wrote:
> This patch adds support Amlogic meson G12 series SoC
> DDR bandwidth PMU driver framework and interfaces.
> 
> The PMU not only can monitor the total DDR bandwidth,
> but also the bandwidth which is from individual IP module.
> 
> Example usage:
> 
>   $ perf stat -a -e meson_ddr_bw/total_rw_bytes/ -I 1000 sleep 10
> 
> - or -
> 
>   $ perf stat -a -e \
>     meson_ddr_bw/total_rw_bytes/,\
>     meson_ddr_bw/chan_1_rw_bytes,arm=1/ -I 1000 \
>     sleep 10
> 
> g12 SoC support 4 channels to monitor DDR bandwidth
> simultaneously. Each channel can monitor up to 4 IP modules
> simultaneously.
> 
> For Instance, If you want to get the sum of DDR bandwidth
> from CPU, GPU, USB3.0 and VDEC. You can use the following
> command parameters to display.
> 
>   $ perf stat -a -e \
>     meson_ddr_bw/chan_2_rw_bytes,arm=1,gpu=1,usb3_0=1,nna=1/ -I 1000 \
>     sleep 10
> 
> Other events are supported, and advertised via perf list.
> 
> Signed-off-by: Jiucheng Xu <jiucheng.xu at amlogic.com>
> Reported-by: kernel test robot <lkp at intel.com>

Please drop this reported-by, it's not accurate with the content of this patch.

> ---
> Changes v5 -> v6:
>    - Add const for driver data
> 
> Changes v4 -> v5:
>    - Remove error message
>    - Use smp_processor_id() instead of raw_smp_processor_id()
>    - Remove EXPORT_SYMBOL()
>    - Use variant specific driver data for compatible
>    - Use module_platform_driver for modules_init/exit
>    - Change location of driver structures from .h  to .c
> 
> Changes v3 -> v4:
>    - No change
> 
> Changes v2 -> v3:
>    - Fix sh GCC 12.1.0 compiling warning
>    - Rename prefix aml to meson for files and code
> 
> Changes v1 -> v2:
>    - Remove inline to let GCC make the decisions
>    - Remove spinlock
>    - Remove ddr_cnt_accumulate()
>    - Remove the message which only indicate a bug
>    - Remove all dev_warn() message
>    - Use hweight64() helper instead of whole loop
>    - Remove setting of hwc
>    - Use for_each_set_bit() helper for bit loop
>    - Use sysfs_emit() in sysfs show
>    - Remove checking for bugs
>    - Replace irq_set_affinity_hint() to irq_set_affinity()
>    - Remove #ifdef CONFIG_OF
>    - Use devm_platform_ioremap_resource() instead of
>      platform_get_resource()&ioremap()
>    - Use platform_get_irq() instead of platform_get_resource()&ioremap()
>    - Replace IRQF_SHARED to IRQF_NOBALANCING
>    - Remove meaningless log like "init ok"
>    - Use compatible instead of creating new property to distinguish
>      different platform.
>    - Use the is_visible callback to avoid exposing unsupported fmt_attr
>    - Use module_platform_driver_probe() instead of module_init/exit
> ---
>   MAINTAINERS                               |   7 +
>   drivers/perf/Kconfig                      |   2 +
>   drivers/perf/Makefile                     |   1 +
>   drivers/perf/amlogic/Kconfig              |  10 +
>   drivers/perf/amlogic/Makefile             |   5 +
>   drivers/perf/amlogic/meson_ddr_pmu_core.c | 562 ++++++++++++++++++++++
>   drivers/perf/amlogic/meson_g12_ddr_pmu.c  | 394 +++++++++++++++
>   include/soc/amlogic/meson_ddr_pmu.h       |  66 +++
>   8 files changed, 1047 insertions(+)
>   create mode 100644 drivers/perf/amlogic/Kconfig
>   create mode 100644 drivers/perf/amlogic/Makefile
>   create mode 100644 drivers/perf/amlogic/meson_ddr_pmu_core.c
>   create mode 100644 drivers/perf/amlogic/meson_g12_ddr_pmu.c
>   create mode 100644 include/soc/amlogic/meson_ddr_pmu.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1d99d54fa881..ac8a98dfbacc 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1050,6 +1050,13 @@ S:	Maintained
>   F:	Documentation/hid/amd-sfh*
>   F:	drivers/hid/amd-sfh-hid/
>   
> +AMLOGIC DDR PMU DRIVER
> +M:	Jiucheng Xu <jiucheng.xu at amlogic.com>
> +S:	Supported
> +W:	http://www.amlogic.com
> +F:	drivers/perf/amlogic/
> +F:	include/soc/amlogic/

Please add:
L:      linux-amlogic at lists.infradead.org

> +
>   AMPHION VPU CODEC V4L2 DRIVER
>   M:	Ming Qian <ming.qian at nxp.com>
>   M:	Shijie Qin <shijie.qin at nxp.com>
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index 1e2d69453771..68200c798128 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -192,4 +192,6 @@ config MARVELL_CN10K_DDR_PMU
>   	  Enable perf support for Marvell DDR Performance monitoring
>   	  event on CN10K platform.
>   
> +source "drivers/perf/amlogic/Kconfig"
> +
>   endmenu
> diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
> index 57a279c61df5..4930482a15ff 100644
> --- a/drivers/perf/Makefile
> +++ b/drivers/perf/Makefile
> @@ -20,3 +20,4 @@ obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o
>   obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
>   obj-$(CONFIG_MARVELL_CN10K_DDR_PMU) += marvell_cn10k_ddr_pmu.o
>   obj-$(CONFIG_APPLE_M1_CPU_PMU) += apple_m1_cpu_pmu.o
> +obj-$(CONFIG_MESON_DDR_PMU) += amlogic/
> diff --git a/drivers/perf/amlogic/Kconfig b/drivers/perf/amlogic/Kconfig
> new file mode 100644
> index 000000000000..f68db01a7f17
> --- /dev/null
> +++ b/drivers/perf/amlogic/Kconfig
> @@ -0,0 +1,10 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +config MESON_DDR_PMU
> +	tristate "Amlogic DDR Bandwidth Performance Monitor"
> +	depends on ARCH_MESON || COMPILE_TEST
> +	help
> +          Provides support for the DDR performance monitor
> +          in Amlogic SoCs, which can give information about
> +          memory throughput and other related events. It
> +          supports multiple channels to monitor the memory
> +          bandwidth simultaneously.
> diff --git a/drivers/perf/amlogic/Makefile b/drivers/perf/amlogic/Makefile
> new file mode 100644
> index 000000000000..d3ab2ac5353b
> --- /dev/null
> +++ b/drivers/perf/amlogic/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +obj-$(CONFIG_MESON_DDR_PMU) += meson_ddr_pmu_g12.o
> +
> +meson_ddr_pmu_g12-y	:= meson_ddr_pmu_core.o meson_g12_ddr_pmu.o
> diff --git a/drivers/perf/amlogic/meson_ddr_pmu_core.c b/drivers/perf/amlogic/meson_ddr_pmu_core.c
> new file mode 100644
> index 000000000000..f14a8d5e24bf
> --- /dev/null
> +++ b/drivers/perf/amlogic/meson_ddr_pmu_core.c
> @@ -0,0 +1,562 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/init.h>
> +#include <linux/irqreturn.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/perf_event.h>
> +#include <linux/platform_device.h>
> +#include <linux/printk.h>
> +#include <linux/sysfs.h>
> +#include <linux/types.h>
> +#include <linux/version.h>
> +
> +#include <soc/amlogic/meson_ddr_pmu.h>
> +
> +struct ddr_pmu {
> +	struct pmu pmu;
> +	struct dmc_info info;
> +	struct dmc_counter counters;	/* save counters from hw */
> +	bool pmu_enabled;
> +	struct device *dev;
> +	char *name;
> +	struct hlist_node node;
> +	enum cpuhp_state cpuhp_state;
> +	int cpu;			/* for cpu hotplug */
> +};
> +
> +#define DDR_PERF_DEV_NAME "meson_ddr_bw"
> +#define MAX_AXI_PORTS_OF_CHANNEL	4	/* A DMC channel can monitor max 4 axi ports */
> +
> +#define to_ddr_pmu(p)		container_of(p, struct ddr_pmu, pmu)
> +#define dmc_info_to_pmu(p)	container_of(p, struct ddr_pmu, info)
> +
> +static void dmc_pmu_enable(struct ddr_pmu *pmu)
> +{
> +	if (!pmu->pmu_enabled)
> +		pmu->info.hw_info->enable(&pmu->info);
> +
> +	pmu->pmu_enabled = true;
> +}
> +
> +static void dmc_pmu_disable(struct ddr_pmu *pmu)
> +{
> +	if (pmu->pmu_enabled)
> +		pmu->info.hw_info->disable(&pmu->info);
> +
> +	pmu->pmu_enabled = false;
> +}
> +
> +static void meson_ddr_set_axi_filter(struct perf_event *event, u8 axi_id)
> +{
> +	struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
> +	int chann;
> +
> +	if (event->attr.config > ALL_CHAN_COUNTER_ID &&
> +	    event->attr.config < COUNTER_MAX_ID) {
> +		chann = event->attr.config - CHAN1_COUNTER_ID;
> +
> +		pmu->info.hw_info->set_axi_filter(&pmu->info, axi_id, chann);
> +	}
> +}
> +
> +static void ddr_cnt_addition(struct dmc_counter *sum,
> +			     struct dmc_counter *add1,
> +			     struct dmc_counter *add2,
> +			     int chann_nr)
> +{
> +	int i;
> +	u64 cnt1, cnt2;
> +
> +	sum->all_cnt = add1->all_cnt + add2->all_cnt;
> +	sum->all_req = add1->all_req + add2->all_req;
> +	for (i = 0; i < chann_nr; i++) {
> +		cnt1 = add1->channel_cnt[i];
> +		cnt2 = add2->channel_cnt[i];
> +
> +		sum->channel_cnt[i] = cnt1 + cnt2;
> +	}
> +}
> +
> +static void meson_ddr_perf_event_update(struct perf_event *event)
> +{
> +	struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
> +	u64 new_raw_count = 0;
> +	struct dmc_counter dc = {0}, sum_dc = {0};
> +	int idx;
> +	int chann_nr = pmu->info.hw_info->chann_nr;
> +
> +	/* get the remain counters in register. */
> +	pmu->info.hw_info->get_counters(&pmu->info, &dc);
> +
> +	ddr_cnt_addition(&sum_dc, &pmu->counters, &dc, chann_nr);
> +
> +	switch (event->attr.config) {
> +	case ALL_CHAN_COUNTER_ID:
> +		new_raw_count = sum_dc.all_cnt;
> +		break;
> +	case CHAN1_COUNTER_ID:
> +	case CHAN2_COUNTER_ID:
> +	case CHAN3_COUNTER_ID:
> +	case CHAN4_COUNTER_ID:
> +	case CHAN5_COUNTER_ID:
> +	case CHAN6_COUNTER_ID:
> +	case CHAN7_COUNTER_ID:
> +	case CHAN8_COUNTER_ID:
> +		idx = event->attr.config - CHAN1_COUNTER_ID;
> +		new_raw_count = sum_dc.channel_cnt[idx];
> +		break;
> +	}
> +
> +	local64_set(&event->count, new_raw_count);
> +}
> +
> +static int meson_ddr_perf_event_init(struct perf_event *event)
> +{
> +	struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
> +	u64 config1 = event->attr.config1;
> +	u64 config2 = event->attr.config2;
> +
> +	if (event->attr.type != event->pmu->type)
> +		return -ENOENT;
> +
> +	if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK)
> +		return -EOPNOTSUPP;
> +
> +	if (event->cpu < 0)
> +		return -EOPNOTSUPP;
> +
> +	/* check if the number of parameters is too much */
> +	if (event->attr.config != ALL_CHAN_COUNTER_ID &&
> +	    hweight64(config1) + hweight64(config2) > MAX_AXI_PORTS_OF_CHANNEL)
> +		return -EOPNOTSUPP;
> +
> +	event->cpu = pmu->cpu;
> +
> +	return 0;
> +}
> +
> +static void meson_ddr_perf_event_start(struct perf_event *event, int flags)
> +{
> +	struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
> +
> +	memset(&pmu->counters, 0, sizeof(pmu->counters));
> +	dmc_pmu_enable(pmu);
> +}
> +
> +static int meson_ddr_perf_event_add(struct perf_event *event, int flags)
> +{
> +	u64 config1 = event->attr.config1;
> +	u64 config2 = event->attr.config2;
> +	int i;
> +
> +	for_each_set_bit(i, (const unsigned long *)&config1, sizeof(config1))
> +		meson_ddr_set_axi_filter(event, i);
> +
> +	for_each_set_bit(i, (const unsigned long *)&config2, sizeof(config2))
> +		meson_ddr_set_axi_filter(event, i + 64);
> +
> +	if (flags & PERF_EF_START)
> +		meson_ddr_perf_event_start(event, flags);
> +
> +	return 0;
> +}
> +
> +static void meson_ddr_perf_event_stop(struct perf_event *event, int flags)
> +{
> +	struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
> +
> +	if (flags & PERF_EF_UPDATE)
> +		meson_ddr_perf_event_update(event);
> +
> +	dmc_pmu_disable(pmu);
> +}
> +
> +static void meson_ddr_perf_event_del(struct perf_event *event, int flags)
> +{
> +	meson_ddr_perf_event_stop(event, PERF_EF_UPDATE);
> +}
> +
> +static ssize_t meson_ddr_perf_cpumask_show(struct device *dev,
> +					   struct device_attribute *attr,
> +					   char *buf)
> +{
> +	struct ddr_pmu *pmu = dev_get_drvdata(dev);
> +
> +	return cpumap_print_to_pagebuf(true, buf, cpumask_of(pmu->cpu));
> +}
> +
> +static struct device_attribute meson_ddr_perf_cpumask_attr =
> +__ATTR(cpumask, 0444, meson_ddr_perf_cpumask_show, NULL);
> +
> +static struct attribute *meson_ddr_perf_cpumask_attrs[] = {
> +	&meson_ddr_perf_cpumask_attr.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group ddr_perf_cpumask_attr_group = {
> +	.attrs = meson_ddr_perf_cpumask_attrs,
> +};
> +
> +static ssize_t
> +pmu_event_show(struct device *dev, struct device_attribute *attr,
> +	       char *page)
> +{
> +	struct perf_pmu_events_attr *pmu_attr;
> +
> +	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
> +	return sysfs_emit(page, "event=0x%02llx\n", pmu_attr->id);
> +}
> +
> +static ssize_t
> +event_show_unit(struct device *dev, struct device_attribute *attr,
> +		char *page)
> +{
> +	return sysfs_emit(page, "MB\n");
> +}
> +
> +static ssize_t
> +event_show_scale(struct device *dev, struct device_attribute *attr,
> +		 char *page)
> +{
> +	/* one count = 16byte = 1.52587890625e-05 MB */
> +	return sysfs_emit(page, "1.52587890625e-05\n");
> +}
> +
> +#define AML_DDR_PMU_EVENT_ATTR(_name, _id)				\
> +{									\
> +	.attr = __ATTR(_name, 0444, pmu_event_show, NULL),		\
> +	.id = _id,							\
> +}
> +
> +#define AML_DDR_PMU_EVENT_UNIT_ATTR(_name)				\
> +	__ATTR(_name.unit, 0444, event_show_unit, NULL)
> +
> +#define AML_DDR_PMU_EVENT_SCALE_ATTR(_name)				\
> +	__ATTR(_name.scale, 0444, event_show_scale, NULL)
> +
> +static struct device_attribute event_unit_attrs[] = {
> +	AML_DDR_PMU_EVENT_UNIT_ATTR(total_rw_bytes),
> +	AML_DDR_PMU_EVENT_UNIT_ATTR(chan_1_rw_bytes),
> +	AML_DDR_PMU_EVENT_UNIT_ATTR(chan_2_rw_bytes),
> +	AML_DDR_PMU_EVENT_UNIT_ATTR(chan_3_rw_bytes),
> +	AML_DDR_PMU_EVENT_UNIT_ATTR(chan_4_rw_bytes),
> +	AML_DDR_PMU_EVENT_UNIT_ATTR(chan_5_rw_bytes),
> +	AML_DDR_PMU_EVENT_UNIT_ATTR(chan_6_rw_bytes),
> +	AML_DDR_PMU_EVENT_UNIT_ATTR(chan_7_rw_bytes),
> +	AML_DDR_PMU_EVENT_UNIT_ATTR(chan_8_rw_bytes),
> +};
> +
> +static struct device_attribute event_scale_attrs[] = {
> +	AML_DDR_PMU_EVENT_SCALE_ATTR(total_rw_bytes),
> +	AML_DDR_PMU_EVENT_SCALE_ATTR(chan_1_rw_bytes),
> +	AML_DDR_PMU_EVENT_SCALE_ATTR(chan_2_rw_bytes),
> +	AML_DDR_PMU_EVENT_SCALE_ATTR(chan_3_rw_bytes),
> +	AML_DDR_PMU_EVENT_SCALE_ATTR(chan_4_rw_bytes),
> +	AML_DDR_PMU_EVENT_SCALE_ATTR(chan_5_rw_bytes),
> +	AML_DDR_PMU_EVENT_SCALE_ATTR(chan_6_rw_bytes),
> +	AML_DDR_PMU_EVENT_SCALE_ATTR(chan_7_rw_bytes),
> +	AML_DDR_PMU_EVENT_SCALE_ATTR(chan_8_rw_bytes),
> +};
> +
> +static struct perf_pmu_events_attr event_attrs[] = {
> +	AML_DDR_PMU_EVENT_ATTR(total_rw_bytes, ALL_CHAN_COUNTER_ID),
> +	AML_DDR_PMU_EVENT_ATTR(chan_1_rw_bytes, CHAN1_COUNTER_ID),
> +	AML_DDR_PMU_EVENT_ATTR(chan_2_rw_bytes, CHAN2_COUNTER_ID),
> +	AML_DDR_PMU_EVENT_ATTR(chan_3_rw_bytes, CHAN3_COUNTER_ID),
> +	AML_DDR_PMU_EVENT_ATTR(chan_4_rw_bytes, CHAN4_COUNTER_ID),
> +	AML_DDR_PMU_EVENT_ATTR(chan_5_rw_bytes, CHAN5_COUNTER_ID),
> +	AML_DDR_PMU_EVENT_ATTR(chan_6_rw_bytes, CHAN6_COUNTER_ID),
> +	AML_DDR_PMU_EVENT_ATTR(chan_7_rw_bytes, CHAN7_COUNTER_ID),
> +	AML_DDR_PMU_EVENT_ATTR(chan_8_rw_bytes, CHAN8_COUNTER_ID),
> +};
> +
> +/* three attrs are combined an event */
> +static struct attribute *ddr_perf_events_attrs[COUNTER_MAX_ID * 3];
> +
> +static struct attribute_group ddr_perf_events_attr_group = {
> +	.name = "events",
> +	.attrs = ddr_perf_events_attrs,
> +};
> +
> +static umode_t meson_ddr_perf_format_attr_visible(struct kobject *kobj,
> +						  struct attribute *attr,
> +						  int n)
> +{
> +	struct pmu *pmu = dev_get_drvdata(kobj_to_dev(kobj));
> +	struct ddr_pmu *ddr_pmu = to_ddr_pmu(pmu);
> +	const u64 *capability = ddr_pmu->info.hw_info->capability;
> +	struct device_attribute *dev_attr;
> +	int id;
> +	char value[20]; // config1:xxx, 20 is enough
> +
> +	dev_attr = container_of(attr, struct device_attribute, attr);
> +	dev_attr->show(NULL, NULL, value);
> +
> +	if (sscanf(value, "config1:%d", &id) == 1)
> +		return capability[0] & (1 << id) ? attr->mode : 0;
> +
> +	if (sscanf(value, "config2:%d", &id) == 1)
> +		return capability[1] & (1 << id) ? attr->mode : 0;
> +
> +	return attr->mode;
> +}
> +
> +static struct attribute_group ddr_perf_format_attr_group = {
> +	.name = "format",
> +	.is_visible = meson_ddr_perf_format_attr_visible,
> +};
> +
> +static ssize_t meson_ddr_perf_identifier_show(struct device *dev,
> +					      struct device_attribute *attr,
> +					      char *page)
> +{
> +	struct ddr_pmu *pmu = dev_get_drvdata(dev);
> +
> +	return sysfs_emit(page, "%s\n", pmu->name);
> +}
> +
> +static struct device_attribute meson_ddr_perf_identifier_attr =
> +__ATTR(identifier, 0444, meson_ddr_perf_identifier_show, NULL);
> +
> +static struct attribute *meson_ddr_perf_identifier_attrs[] = {
> +	&meson_ddr_perf_identifier_attr.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group ddr_perf_identifier_attr_group = {
> +	.attrs = meson_ddr_perf_identifier_attrs,
> +};
> +
> +static const struct attribute_group *attr_groups[] = {
> +	&ddr_perf_events_attr_group,
> +	&ddr_perf_format_attr_group,
> +	&ddr_perf_cpumask_attr_group,
> +	&ddr_perf_identifier_attr_group,
> +	NULL,
> +};
> +
> +static irqreturn_t dmc_irq_handler(int irq, void *dev_id)
> +{
> +	struct dmc_info *info = dev_id;
> +	struct ddr_pmu *pmu;
> +	struct dmc_counter counters, *sum_cnter;
> +	int i;
> +
> +	pmu = dmc_info_to_pmu(info);
> +
> +	if (info->hw_info->irq_handler(info, &counters) != 0)
> +		goto out;
> +
> +	sum_cnter = &pmu->counters;
> +	sum_cnter->all_cnt += counters.all_cnt;
> +	sum_cnter->all_req += counters.all_req;
> +
> +	for (i = 0; i < pmu->info.hw_info->chann_nr; i++)
> +		sum_cnter->channel_cnt[i] += counters.channel_cnt[i];
> +
> +	if (pmu->pmu_enabled)
> +		/*
> +		 * the timer interrupt only supprt
> +		 * one shot mode, we have to re-enable
> +		 * it in ISR to support continue mode.
> +		 */
> +		info->hw_info->enable(info);
> +
> +	dev_dbg(pmu->dev, "counts: %llu %llu %llu, %llu, %llu, %llu\t\t"
> +			"sum: %llu %llu %llu, %llu, %llu, %llu\n",
> +			counters.all_req,
> +			counters.all_cnt,
> +			counters.channel_cnt[0],
> +			counters.channel_cnt[1],
> +			counters.channel_cnt[2],
> +			counters.channel_cnt[3],
> +
> +			pmu->counters.all_req,
> +			pmu->counters.all_cnt,
> +			pmu->counters.channel_cnt[0],
> +			pmu->counters.channel_cnt[1],
> +			pmu->counters.channel_cnt[2],
> +			pmu->counters.channel_cnt[3]);
> +out:
> +	return IRQ_HANDLED;
> +}
> +
> +static int ddr_perf_offline_cpu(unsigned int cpu, struct hlist_node *node)
> +{
> +	struct ddr_pmu *pmu = hlist_entry_safe(node, struct ddr_pmu, node);
> +	int target;
> +
> +	if (cpu != pmu->cpu)
> +		return 0;
> +
> +	target = cpumask_any_but(cpu_online_mask, cpu);
> +	if (target >= nr_cpu_ids)
> +		return 0;
> +
> +	perf_pmu_migrate_context(&pmu->pmu, cpu, target);
> +	pmu->cpu = target;
> +
> +	WARN_ON(irq_set_affinity(pmu->info.irq_num, cpumask_of(pmu->cpu)));
> +
> +	return 0;
> +}
> +
> +static void fill_event_attr(struct ddr_pmu *pmu)
> +{
> +	int i, j, k;
> +	struct attribute **dst = ddr_perf_events_attrs;
> +
> +	j = 0;
> +	k = 0;
> +
> +	/* fill ALL_CHAN_COUNTER_ID event */
> +	dst[j++] = &event_attrs[k].attr.attr;
> +	dst[j++] = &event_unit_attrs[k].attr;
> +	dst[j++] = &event_scale_attrs[k].attr;
> +
> +	k++;
> +
> +	/* fill each channel event */
> +	for (i = 0; i < pmu->info.hw_info->chann_nr; i++, k++) {
> +		dst[j++] = &event_attrs[k].attr.attr;
> +		dst[j++] = &event_unit_attrs[k].attr;
> +		dst[j++] = &event_scale_attrs[k].attr;
> +	}
> +
> +	dst[j] = NULL; /* mark end */
> +}
> +
> +static void fmt_attr_fill(struct attribute **fmt_attr)
> +{
> +	ddr_perf_format_attr_group.attrs = fmt_attr;
> +}
> +
> +static int ddr_pmu_parse_dt(struct platform_device *pdev,
> +			    struct dmc_info *info)
> +{
> +	void __iomem *base;
> +	int i, ret;
> +
> +	info->hw_info = of_device_get_match_data(&pdev->dev);
> +
> +	for (i = 0; i < info->hw_info->dmc_nr; i++) {
> +		/* resource 0 for ddr register base */
> +		base = devm_platform_ioremap_resource(pdev, i);
> +		if (IS_ERR(base))
> +			return PTR_ERR(base);
> +
> +		info->ddr_reg[i] = base;
> +	}
> +
> +	/* resource i for pll register base */
> +	base = devm_platform_ioremap_resource(pdev, i);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
> +	info->pll_reg = base;
> +
> +	ret = platform_get_irq(pdev, 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	info->irq_num = ret;
> +
> +	ret = devm_request_irq(&pdev->dev, info->irq_num, dmc_irq_handler,
> +			       IRQF_NOBALANCING, dev_name(&pdev->dev),
> +			       (void *)info);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +int meson_ddr_pmu_create(struct platform_device *pdev)
> +{
> +	int ret;
> +	char *name;
> +	struct ddr_pmu *pmu;
> +
> +	pmu = devm_kzalloc(&pdev->dev, sizeof(struct ddr_pmu), GFP_KERNEL);
> +	if (!pmu)
> +		return -ENOMEM;
> +
> +	*pmu = (struct ddr_pmu) {
> +		.pmu = {
> +			.module		= THIS_MODULE,
> +			.capabilities	= PERF_PMU_CAP_NO_EXCLUDE,
> +			.task_ctx_nr	= perf_invalid_context,
> +			.attr_groups	= attr_groups,
> +			.event_init	= meson_ddr_perf_event_init,
> +			.add		= meson_ddr_perf_event_add,
> +			.del		= meson_ddr_perf_event_del,
> +			.start		= meson_ddr_perf_event_start,
> +			.stop		= meson_ddr_perf_event_stop,
> +			.read		= meson_ddr_perf_event_update,
> +		},
> +	};
> +
> +	ret = ddr_pmu_parse_dt(pdev, &pmu->info);
> +	if (ret < 0)
> +		return ret;
> +
> +	fmt_attr_fill(pmu->info.hw_info->fmt_attr);
> +
> +	pmu->cpu = smp_processor_id();
> +
> +	name = devm_kasprintf(&pdev->dev, GFP_KERNEL, DDR_PERF_DEV_NAME);
> +	if (!name)
> +		return -ENOMEM;
> +
> +	ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, name, NULL,
> +				      ddr_perf_offline_cpu);
> +	if (ret < 0)
> +		return ret;
> +
> +	pmu->cpuhp_state = ret;
> +
> +	/* Register the pmu instance for cpu hotplug */
> +	ret = cpuhp_state_add_instance_nocalls(pmu->cpuhp_state, &pmu->node);
> +	if (ret)
> +		goto cpuhp_instance_err;
> +
> +	fill_event_attr(pmu);
> +
> +	ret = perf_pmu_register(&pmu->pmu, name, -1);
> +	if (ret)
> +		goto pmu_register_err;
> +
> +	pmu->name = name;
> +	pmu->dev = &pdev->dev;
> +	pmu->pmu_enabled = false;
> +
> +	platform_set_drvdata(pdev, pmu);
> +
> +	return 0;
> +
> +pmu_register_err:
> +	cpuhp_state_remove_instance_nocalls(pmu->cpuhp_state, &pmu->node);
> +
> +cpuhp_instance_err:
> +	cpuhp_remove_state(pmu->cpuhp_state);
> +
> +	return ret;
> +}
> +
> +int meson_ddr_pmu_remove(struct platform_device *pdev)
> +{
> +	struct ddr_pmu *pmu = platform_get_drvdata(pdev);
> +
> +	perf_pmu_unregister(&pmu->pmu);
> +	cpuhp_state_remove_instance_nocalls(pmu->cpuhp_state, &pmu->node);
> +	cpuhp_remove_state(pmu->cpuhp_state);
> +
> +	return 0;
> +}
> diff --git a/drivers/perf/amlogic/meson_g12_ddr_pmu.c b/drivers/perf/amlogic/meson_g12_ddr_pmu.c
> new file mode 100644
> index 000000000000..27713c11350e
> --- /dev/null
> +++ b/drivers/perf/amlogic/meson_g12_ddr_pmu.c
> @@ -0,0 +1,394 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/perf_event.h>
> +#include <linux/platform_device.h>
> +#include <linux/printk.h>
> +#include <linux/types.h>
> +#include <linux/version.h>
> +
> +#include <soc/amlogic/meson_ddr_pmu.h>
> +
> +#define PORT_MAJOR		32
> +#define DEFAULT_XTAL_FREQ	24000000UL
> +
> +#define DMC_QOS_IRQ		BIT(30)
> +
> +/* DMC bandwidth monitor register address offset */
> +#define DMC_MON_G12_CTRL0		(0x20  << 2)
> +#define DMC_MON_G12_CTRL1		(0x21  << 2)
> +#define DMC_MON_G12_CTRL2		(0x22  << 2)
> +#define DMC_MON_G12_CTRL3		(0x23  << 2)
> +#define DMC_MON_G12_CTRL4		(0x24  << 2)
> +#define DMC_MON_G12_CTRL5		(0x25  << 2)
> +#define DMC_MON_G12_CTRL6		(0x26  << 2)
> +#define DMC_MON_G12_CTRL7		(0x27  << 2)
> +#define DMC_MON_G12_CTRL8		(0x28  << 2)
> +
> +#define DMC_MON_G12_ALL_REQ_CNT		(0x29  << 2)
> +#define DMC_MON_G12_ALL_GRANT_CNT	(0x2a  << 2)
> +#define DMC_MON_G12_ONE_GRANT_CNT	(0x2b  << 2)
> +#define DMC_MON_G12_SEC_GRANT_CNT	(0x2c  << 2)
> +#define DMC_MON_G12_THD_GRANT_CNT	(0x2d  << 2)
> +#define DMC_MON_G12_FOR_GRANT_CNT	(0x2e  << 2)
> +#define DMC_MON_G12_TIMER		(0x2f  << 2)
> +
> +/* Each bit represent a axi line */
> +PMU_FORMAT_ATTR(event, "config:0-7");
> +PMU_FORMAT_ATTR(arm, "config1:0");
> +PMU_FORMAT_ATTR(gpu, "config1:1");
> +PMU_FORMAT_ATTR(pcie, "config1:2");
> +PMU_FORMAT_ATTR(hdcp, "config1:3");
> +PMU_FORMAT_ATTR(hevc_front, "config1:4");
> +PMU_FORMAT_ATTR(usb3_0, "config1:6");
> +PMU_FORMAT_ATTR(device, "config1:7");
> +PMU_FORMAT_ATTR(hevc_back, "config1:8");
> +PMU_FORMAT_ATTR(h265enc, "config1:9");
> +PMU_FORMAT_ATTR(vpu_read1, "config1:16");
> +PMU_FORMAT_ATTR(vpu_read2, "config1:17");
> +PMU_FORMAT_ATTR(vpu_read3, "config1:18");
> +PMU_FORMAT_ATTR(vpu_write1, "config1:19");
> +PMU_FORMAT_ATTR(vpu_write2, "config1:20");
> +PMU_FORMAT_ATTR(vdec, "config1:21");
> +PMU_FORMAT_ATTR(hcodec, "config1:22");
> +PMU_FORMAT_ATTR(ge2d, "config1:23");
> +
> +PMU_FORMAT_ATTR(spicc1, "config1:32");
> +PMU_FORMAT_ATTR(usb0, "config1:33");
> +PMU_FORMAT_ATTR(dma, "config1:34");
> +PMU_FORMAT_ATTR(arb0, "config1:35");
> +PMU_FORMAT_ATTR(sd_emmc_b, "config1:36");
> +PMU_FORMAT_ATTR(usb1, "config1:37");
> +PMU_FORMAT_ATTR(audio, "config1:38");
> +PMU_FORMAT_ATTR(aififo, "config1:39");
> +PMU_FORMAT_ATTR(parser, "config1:41");
> +PMU_FORMAT_ATTR(ao_cpu, "config1:42");
> +PMU_FORMAT_ATTR(sd_emmc_c, "config1:43");
> +PMU_FORMAT_ATTR(spicc2, "config1:44");
> +PMU_FORMAT_ATTR(ethernet, "config1:45");
> +PMU_FORMAT_ATTR(sana, "config1:46");
> +
> +/* for sm1 and g12b */
> +PMU_FORMAT_ATTR(nna, "config1:10");
> +
> +/* for g12b only */
> +PMU_FORMAT_ATTR(gdc, "config1:11");
> +PMU_FORMAT_ATTR(mipi_isp, "config1:12");
> +PMU_FORMAT_ATTR(arm1, "config1:13");
> +PMU_FORMAT_ATTR(sd_emmc_a, "config1:40");
> +
> +static struct attribute *g12_pmu_format_attrs[] = {
> +	&format_attr_event.attr,
> +	&format_attr_arm.attr,
> +	&format_attr_gpu.attr,
> +	&format_attr_nna.attr,
> +	&format_attr_gdc.attr,
> +	&format_attr_arm1.attr,
> +	&format_attr_mipi_isp.attr,
> +	&format_attr_sd_emmc_a.attr,
> +	&format_attr_pcie.attr,
> +	&format_attr_hdcp.attr,
> +	&format_attr_hevc_front.attr,
> +	&format_attr_usb3_0.attr,
> +	&format_attr_device.attr,
> +	&format_attr_hevc_back.attr,
> +	&format_attr_h265enc.attr,
> +	&format_attr_vpu_read1.attr,
> +	&format_attr_vpu_read2.attr,
> +	&format_attr_vpu_read3.attr,
> +	&format_attr_vpu_write1.attr,
> +	&format_attr_vpu_write2.attr,
> +	&format_attr_vdec.attr,
> +	&format_attr_hcodec.attr,
> +	&format_attr_ge2d.attr,
> +	&format_attr_spicc1.attr,
> +	&format_attr_usb0.attr,
> +	&format_attr_dma.attr,
> +	&format_attr_arb0.attr,
> +	&format_attr_sd_emmc_b.attr,
> +	&format_attr_usb1.attr,
> +	&format_attr_audio.attr,
> +	&format_attr_aififo.attr,
> +	&format_attr_parser.attr,
> +	&format_attr_ao_cpu.attr,
> +	&format_attr_sd_emmc_c.attr,
> +	&format_attr_spicc2.attr,
> +	&format_attr_ethernet.attr,
> +	&format_attr_sana.attr,
> +	NULL,
> +};
> +
> +/* calculate ddr clock */
> +static unsigned long dmc_g12_get_freq_quick(struct dmc_info *info)
> +{
> +	unsigned int val;
> +	unsigned int n, m, od1;
> +	unsigned int od_div = 0xfff;
> +	unsigned long freq = 0;
> +
> +	val = readl(info->pll_reg);
> +	val = val & 0xfffff;
> +	switch ((val >> 16) & 7) {
> +	case 0:
> +		od_div = 2;
> +		break;
> +
> +	case 1:
> +		od_div = 3;
> +		break;
> +
> +	case 2:
> +		od_div = 4;
> +		break;
> +
> +	case 3:
> +		od_div = 6;
> +		break;
> +
> +	case 4:
> +		od_div = 8;
> +		break;
> +
> +	default:
> +		break;
> +	}
> +
> +	m = val & 0x1ff;
> +	n = ((val >> 10) & 0x1f);
> +	od1 = (((val >> 19) & 0x1)) == 1 ? 2 : 1;
> +	freq = DEFAULT_XTAL_FREQ / 1000;        /* avoid overflow */
> +	if (n)
> +		freq = ((((freq * m) / n) >> od1) / od_div) * 1000;
> +
> +	return freq;
> +}
> +
> +#ifdef DEBUG
> +static void g12_dump_reg(struct dmc_info *db)
> +{
> +	int s = 0, i;
> +	unsigned int r;
> +
> +	for (i = 0; i < 9; i++) {
> +		r  = readl(db->ddr_reg[0] + (DMC_MON_G12_CTRL0 + (i << 2)));
> +		pr_notice("DMC_MON_CTRL%d:        %08x\n", i, r);
> +	}
> +	r  = readl(db->ddr_reg[0] + DMC_MON_G12_ALL_REQ_CNT);
> +	pr_notice("DMC_MON_ALL_REQ_CNT:  %08x\n", r);
> +	r  = readl(db->ddr_reg[0] + DMC_MON_G12_ALL_GRANT_CNT);
> +	pr_notice("DMC_MON_ALL_GRANT_CNT:%08x\n", r);
> +	r  = readl(db->ddr_reg[0] + DMC_MON_G12_ONE_GRANT_CNT);
> +	pr_notice("DMC_MON_ONE_GRANT_CNT:%08x\n", r);
> +	r  = readl(db->ddr_reg[0] + DMC_MON_G12_SEC_GRANT_CNT);
> +	pr_notice("DMC_MON_SEC_GRANT_CNT:%08x\n", r);
> +	r  = readl(db->ddr_reg[0] + DMC_MON_G12_THD_GRANT_CNT);
> +	pr_notice("DMC_MON_THD_GRANT_CNT:%08x\n", r);
> +	r  = readl(db->ddr_reg[0] + DMC_MON_G12_FOR_GRANT_CNT);
> +	pr_notice("DMC_MON_FOR_GRANT_CNT:%08x\n", r);
> +	r  = readl(db->ddr_reg[0] + DMC_MON_G12_TIMER);
> +	pr_notice("DMC_MON_TIMER:        %08x\n", r);
> +}
> +#endif
> +
> +static void dmc_g12_counter_enable(struct dmc_info *info)
> +{
> +	unsigned int val;
> +	unsigned long clock_count = dmc_g12_get_freq_quick(info) / 10; /* 100ms */
> +
> +	writel(clock_count, info->ddr_reg[0] + DMC_MON_G12_TIMER);
> +
> +	val = readl(info->ddr_reg[0] + DMC_MON_G12_CTRL0);
> +
> +	/* enable all channel */
> +	val =  BIT(31) |	/* enable bit */
> +	       BIT(20) |	/* use timer  */
> +	       0x0f;		/* 4 channels */
> +
> +	writel(val, info->ddr_reg[0] + DMC_MON_G12_CTRL0);
> +
> +#ifdef DEBUG
> +	g12_dump_reg(info);
> +#endif
> +}
> +
> +static void dmc_g12_config_fiter(struct dmc_info *info,
> +				 int port, int channel)
> +{
> +	u32 val;
> +	u32 rp[MAX_CHANNEL_NUM] = {DMC_MON_G12_CTRL1, DMC_MON_G12_CTRL3,
> +					DMC_MON_G12_CTRL5, DMC_MON_G12_CTRL7};
> +	u32 rs[MAX_CHANNEL_NUM] = {DMC_MON_G12_CTRL2, DMC_MON_G12_CTRL4,
> +					DMC_MON_G12_CTRL6, DMC_MON_G12_CTRL8};
> +	int subport = -1;
> +
> +	/* clear all port mask */
> +	if (port < 0) {
> +		writel(0, info->ddr_reg[0] + rp[channel]);
> +		writel(0, info->ddr_reg[0] + rs[channel]);
> +		return;
> +	}
> +
> +	if (port >= PORT_MAJOR)
> +		subport = port - PORT_MAJOR;
> +
> +	if (subport < 0) {
> +		val = readl(info->ddr_reg[0] + rp[channel]);
> +		val |=  (1 << port);
> +		writel(val, info->ddr_reg[0] + rp[channel]);
> +		val = 0xffff;
> +		writel(val, info->ddr_reg[0] + rs[channel]);
> +	} else {
> +		val = BIT(23);		/* select device */
> +		writel(val, info->ddr_reg[0] + rp[channel]);
> +		val = readl(info->ddr_reg[0] + rs[channel]);
> +		val |= (1 << subport);
> +		writel(val, info->ddr_reg[0] + rs[channel]);
> +	}
> +}
> +
> +static void dmc_g12_set_axi_filter(struct dmc_info *info, int axi_id, int channel)
> +{
> +	if (channel > info->hw_info->chann_nr)
> +		return;
> +
> +	dmc_g12_config_fiter(info, axi_id, channel);
> +}
> +
> +static void dmc_g12_counter_disable(struct dmc_info *info)
> +{
> +	int i;
> +
> +	/* clear timer */
> +	writel(0, info->ddr_reg[0] + DMC_MON_G12_CTRL0);
> +	writel(0, info->ddr_reg[0] + DMC_MON_G12_TIMER);
> +
> +	writel(0, info->ddr_reg[0] + DMC_MON_G12_ALL_REQ_CNT);
> +	writel(0, info->ddr_reg[0] + DMC_MON_G12_ALL_GRANT_CNT);
> +	writel(0, info->ddr_reg[0] + DMC_MON_G12_ONE_GRANT_CNT);
> +	writel(0, info->ddr_reg[0] + DMC_MON_G12_SEC_GRANT_CNT);
> +	writel(0, info->ddr_reg[0] + DMC_MON_G12_THD_GRANT_CNT);
> +	writel(0, info->ddr_reg[0] + DMC_MON_G12_FOR_GRANT_CNT);
> +
> +	/* clear port channel mapping */
> +	for (i = 0; i < info->hw_info->chann_nr; i++)
> +		dmc_g12_config_fiter(info, -1, i);
> +}
> +
> +static void dmc_g12_get_counters(struct dmc_info *info,
> +				 struct dmc_counter *counter)
> +{
> +	int i;
> +	unsigned int reg;
> +
> +	counter->all_cnt = readl(info->ddr_reg[0] + DMC_MON_G12_ALL_GRANT_CNT);
> +	counter->all_req   = readl(info->ddr_reg[0] + DMC_MON_G12_ALL_REQ_CNT);
> +
> +	for (i = 0; i < info->hw_info->chann_nr; i++) {
> +		reg = DMC_MON_G12_ONE_GRANT_CNT + (i << 2);
> +		counter->channel_cnt[i] = readl(info->ddr_reg[0] + reg);
> +	}
> +}
> +
> +static int dmc_g12_irq_handler(struct dmc_info *info,
> +			       struct dmc_counter *counter)
> +{
> +	unsigned int val;
> +	int ret = -EINVAL;
> +
> +	val = readl(info->ddr_reg[0] + DMC_MON_G12_CTRL0);
> +	if (val & DMC_QOS_IRQ) {
> +		dmc_g12_get_counters(info, counter);
> +		/* clear irq flags */
> +		writel(val, info->ddr_reg[0] + DMC_MON_G12_CTRL0);
> +		ret = 0;
> +	}
> +	return ret;
> +}
> +
> +static const struct dmc_hw_info g12a_dmc_info = {
> +	.enable		= dmc_g12_counter_enable,
> +	.disable	= dmc_g12_counter_disable,
> +	.irq_handler	= dmc_g12_irq_handler,
> +	.get_counters	= dmc_g12_get_counters,
> +	.set_axi_filter	= dmc_g12_set_axi_filter,
> +
> +	.dmc_nr = 1,
> +	.chann_nr = 4,
> +	.capability = {0X7EFF00FF03DF, 0},
> +	.fmt_attr = g12_pmu_format_attrs,
> +};
> +
> +static const struct dmc_hw_info g12b_dmc_info = {
> +	.enable		= dmc_g12_counter_enable,
> +	.disable	= dmc_g12_counter_disable,
> +	.irq_handler	= dmc_g12_irq_handler,
> +	.get_counters	= dmc_g12_get_counters,
> +	.set_axi_filter	= dmc_g12_set_axi_filter,
> +
> +	.dmc_nr = 1,
> +	.chann_nr = 4,
> +	.capability = {0X7FFF00FF3FDF, 0},
> +	.fmt_attr = g12_pmu_format_attrs,
> +};
> +
> +static const struct dmc_hw_info sm1_dmc_info = {
> +	.enable		= dmc_g12_counter_enable,
> +	.disable	= dmc_g12_counter_disable,
> +	.irq_handler	= dmc_g12_irq_handler,
> +	.get_counters	= dmc_g12_get_counters,
> +	.set_axi_filter	= dmc_g12_set_axi_filter,
> +
> +	.dmc_nr = 1,
> +	.chann_nr = 4,
> +	.capability = {0X7EFF00FF07DF, 0},
> +	.fmt_attr = g12_pmu_format_attrs,
> +};
> +
> +static int g12_ddr_pmu_probe(struct platform_device *pdev)
> +{
> +	return meson_ddr_pmu_create(pdev);
> +}
> +
> +static int g12_ddr_pmu_remove(struct platform_device *pdev)
> +{
> +	meson_ddr_pmu_remove(pdev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id meson_ddr_pmu_dt_match[] = {
> +	{
> +		.compatible = "amlogic,g12a-ddr-pmu",
> +		.data = &g12a_dmc_info,
> +	},
> +	{
> +		.compatible = "amlogic,g12b-ddr-pmu",
> +		.data = &g12b_dmc_info,
> +	},
> +	{
> +		.compatible = "amlogic,sm1-ddr-pmu",
> +		.data = &sm1_dmc_info,
> +	},
> +	{}
> +};
> +
> +static struct platform_driver g12_ddr_pmu_driver = {
> +	.probe = g12_ddr_pmu_probe,
> +	.remove = g12_ddr_pmu_remove,
> +
> +	.driver = {
> +		.name = "amlogic,g12-ddr-pmu",

The name should be something like "meson-g12-ddr-pmu", not the compatible string.

> +		.of_match_table = meson_ddr_pmu_dt_match,
> +	},
> +};
> +
> +module_platform_driver(g12_ddr_pmu_driver);
> +MODULE_AUTHOR("Jiucheng Xu");
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Amlogic G12 series SoC DDR PMU");
> diff --git a/include/soc/amlogic/meson_ddr_pmu.h b/include/soc/amlogic/meson_ddr_pmu.h
> new file mode 100644
> index 000000000000..4a33e4ab8ada
> --- /dev/null
> +++ b/include/soc/amlogic/meson_ddr_pmu.h
> @@ -0,0 +1,66 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022 Amlogic, Inc. All rights reserved.
> + */
> +
> +#ifndef __MESON_DDR_PMU_H__
> +#define __MESON_DDR_PMU_H__
> +
> +#define MAX_CHANNEL_NUM		8
> +
> +enum {
> +	ALL_CHAN_COUNTER_ID,
> +	CHAN1_COUNTER_ID,
> +	CHAN2_COUNTER_ID,
> +	CHAN3_COUNTER_ID,
> +	CHAN4_COUNTER_ID,
> +	CHAN5_COUNTER_ID,
> +	CHAN6_COUNTER_ID,
> +	CHAN7_COUNTER_ID,
> +	CHAN8_COUNTER_ID,
> +	COUNTER_MAX_ID,
> +};
> +
> +struct dmc_info;
> +
> +struct dmc_counter {
> +	u64 all_cnt;	/* The count of all requests come in/out ddr controller */
> +	union {
> +		u64 all_req;
> +		struct {
> +			u64 all_idle_cnt;
> +			u64 all_16bit_cnt;
> +		};
> +	};
> +	u64 channel_cnt[MAX_CHANNEL_NUM]; /* To save a DMC bandwidth-monitor channel counter */
> +};
> +
> +struct dmc_hw_info {
> +	void (*enable)(struct dmc_info *info);
> +	void (*disable)(struct dmc_info *info);
> +	/* Bind an axi line to a bandwidth-monitor channel */
> +	void (*set_axi_filter)(struct dmc_info *info, int axi_id, int chann);
> +	int (*irq_handler)(struct dmc_info *info,
> +			   struct dmc_counter *counter);
> +	void (*get_counters)(struct dmc_info *info,
> +			     struct dmc_counter *counter);
> +
> +	int dmc_nr;			/* The number of dmc controller */
> +	int chann_nr;			/* The number of dmc bandwidth monitor channels */
> +	struct attribute **fmt_attr;
> +	const u64 capability[2];
> +};
> +
> +struct dmc_info {
> +	const struct dmc_hw_info *hw_info;
> +
> +	void __iomem *ddr_reg[4];
> +	unsigned long timer_value;	/* Timer value in TIMER register */
> +	void __iomem *pll_reg;
> +	int irq_num;			/* irq vector number */
> +};
> +
> +int meson_ddr_pmu_create(struct platform_device *pdev);
> +int meson_ddr_pmu_remove(struct platform_device *pdev);
> +
> +#endif /* __MESON_DDR_PMU_H__ */
> 
> base-commit: 7e7a24c3c6c98abc4425abd1dbf2a71b42dfafcf

Thanks,
Neil



More information about the linux-amlogic mailing list