[PATCH v4 1/4] gpu: drm: meson: Use devm_regulator_*get_enable*()

Neil Armstrong neil.armstrong at linaro.org
Fri Oct 21 08:29:16 PDT 2022


Hi,

On 21/10/2022 17:02, Laurent Pinchart wrote:
> Hi Matti,
> 
> On Fri, Oct 21, 2022 at 04:18:01PM +0300, Matti Vaittinen wrote:
>> Simplify using the devm_regulator_get_enable_optional(). Also drop the
>> seemingly unused struct member 'hdmi_supply'.
>>
>> Signed-off-by: Matti Vaittinen <mazziesaccount at gmail.com>
>>
>> ---
>> v3 => v4:
>> - split meson part to own patch
>>
>> RFCv1 => v2:
>> - Change also sii902x to use devm_regulator_bulk_get_enable()
>>
>> Please note - this is only compile-tested due to the lack of HW. Careful
>> review and testing is _highly_ appreciated.
>> ---
>>   drivers/gpu/drm/meson/meson_dw_hdmi.c | 23 +++--------------------
>>   1 file changed, 3 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
>> index 5cd2b2ebbbd3..7642f740272b 100644
>> --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
>> +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
>> @@ -140,7 +140,6 @@ struct meson_dw_hdmi {
>>   	struct reset_control *hdmitx_apb;
>>   	struct reset_control *hdmitx_ctrl;
>>   	struct reset_control *hdmitx_phy;
>> -	struct regulator *hdmi_supply;
>>   	u32 irq_stat;
>>   	struct dw_hdmi *hdmi;
>>   	struct drm_bridge *bridge;
>> @@ -665,11 +664,6 @@ static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi)
>>   
>>   }
>>   
>> -static void meson_disable_regulator(void *data)
>> -{
>> -	regulator_disable(data);
>> -}
>> -
>>   static void meson_disable_clk(void *data)
>>   {
>>   	clk_disable_unprepare(data);
>> @@ -723,20 +717,9 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
>>   	meson_dw_hdmi->data = match;
>>   	dw_plat_data = &meson_dw_hdmi->dw_plat_data;
>>   
>> -	meson_dw_hdmi->hdmi_supply = devm_regulator_get_optional(dev, "hdmi");
>> -	if (IS_ERR(meson_dw_hdmi->hdmi_supply)) {
>> -		if (PTR_ERR(meson_dw_hdmi->hdmi_supply) == -EPROBE_DEFER)
>> -			return -EPROBE_DEFER;
>> -		meson_dw_hdmi->hdmi_supply = NULL;
>> -	} else {
>> -		ret = regulator_enable(meson_dw_hdmi->hdmi_supply);
>> -		if (ret)
>> -			return ret;
>> -		ret = devm_add_action_or_reset(dev, meson_disable_regulator,
>> -					       meson_dw_hdmi->hdmi_supply);
>> -		if (ret)
>> -			return ret;
>> -	}
>> +	ret = devm_regulator_get_enable_optional(dev, "hdmi");
>> +	if (ret != -ENODEV)
>> +		return ret;
> 
> As noted in the review of the series that introduced
> devm_regulator_get_enable_optional(), the right thing to do is to
> implement runtime PM in this driver to avoid wasting power.

While I agree, it's not really the same level of effort as this patch
should be functionally equivalent.

> 
>>   
>>   	meson_dw_hdmi->hdmitx_apb = devm_reset_control_get_exclusive(dev,
>>   						"hdmitx_apb");
> 

Neil



More information about the linux-amlogic mailing list