[PATCH] arm64: dts: meson: Enable active coling using gpio-fan on Odroid N2/N2+

[Alexander Stein]

Am Dienstag, 18. Oktober 2022, 21:51:19 CEST schrieb Anand Moon:
> Odroid N2/N2+ support active cooling via gpio-fan controller.
> Add fan controls and tip point for cpu and ddr thermal sensor
> on this boards.
> 
> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> ---
>  .../dts/amlogic/meson-g12b-odroid-n2.dtsi     | 42 +++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index
> fd3fa82e4c33..e61a4285a910 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> @@ -39,6 +39,14 @@ emmc_pwrseq: emmc-pwrseq {
>  		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
>  	};
> 
> +	fan: gpio-fan {
> +		compatible = "gpio-fan";
> +		gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>;
> +		/* Using Dummy Speed */
> +		gpio-fan,speed-map = <0 0>, <1 1>;
> +		#cooling-cells = <2>;
> +	};
> +
>  	leds {
>  		compatible = "gpio-leds";
> 
> @@ -410,6 +418,40 @@ &cpu103 {
>  	clock-latency = <50000>;
>  };
> 
> +&cpu_thermal {
> +	trips {
> +		cpu_active: cpu-active {
> +			temperature = <60000>; /* millicelsius */
> +			hysteresis = <2000>; /* millicelsius */
> +			type = "active";
> +		};
> +	};
> +
> +	cooling-maps {
> +		map {
> +			trip = <&cpu_active>;
> +			cooling-device = <&fan THERMAL_NO_LIMIT 
THERMAL_NO_LIMIT>;
> +		};
> +	};
> +};
> +
> +&ddr_thermal {
> +	trips {
> +		ddr_active: cpu-active {

I suspect this node name shall be 'ddr-active', not 'cpu-active'.

Best regards,
Alexander

> +			temperature = <60000>; /* millicelsius */
> +			hysteresis = <2000>; /* millicelsius */
> +			type = "active";
> +		};
> +	};
> +
> +	cooling-maps {
> +		map {
> +			trip = <&ddr_active>;
> +			cooling-device = <&fan THERMAL_NO_LIMIT 
THERMAL_NO_LIMIT>;
> +		};
> +	};
> +};
> +
>  &ext_mdio {
>  	external_phy: ethernet-phy at 0 {
>  		/* Realtek RTL8211F (0x001cc916) */
> 
> base-commit: aae703b02f92bde9264366c545e87cec451de471