[PATCH] arm64: dts: meson: Enable active coling using gpio-fan on Odroid N2/N2+

[Dan Johansen]

Den 18.10.2022 kl. 23.16 skrev Martin Blumenstingl:
> Hello Anand,
>
> On Tue, Oct 18, 2022 at 9:53 PM Anand Moon <linux.amoon at gmail.com> wrote:
>> Odroid N2/N2+ support active cooling via gpio-fan controller.
>> Add fan controls and tip point for cpu and ddr thermal sensor
>> on this boards.
> In the schematics for board rev 0.6 [0] I cannot find any information
> about a fan connector.
> The schematics for board rev 0.3 [1] on the other hand document a PWM
> based fan connector on page 16.
> So now I am not sure whether your patch only applies to certain board
> revisions, the schematics are incorrect, etc.
>
> Can you please provide some details about the fan connector on
> Odroid-N2/N2+ and which hardware revisions are supported (and which
> aren't) by your patch?
I can add that my N2+ rev 0.5 does have a fan connector.
>
>
> Thank you!
> Martin
>
>
> [0] https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
> [1] https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.3_20190117.pdf
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
-- 
Kind regards
*Dan Johansen*
Project lead of the *Manjaro ARM* project
Manjaro-ARM <https://manjaro.org>