[PATCH] ARM: dts: meson: align LED node names with dtschema

[Krzysztof Kozlowski]

The node names should be generic and DT schema expects certain pattern:

  meson8-minix-neo-x8.dtb: gpio-leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm/boot/dts/meson8-minix-neo-x8.dts | 2 +-
 arch/arm/boot/dts/meson8b-ec100.dts       | 2 +-
 arch/arm/boot/dts/meson8b-odroidc1.dts    | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
index 56ea875c418c..c6d1c5a8a3bf 100644
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
@@ -27,7 +27,7 @@ memory {
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			label = "x8:blue:power";
 			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index 77d4beeb8010..3da47349eaaf 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -73,7 +73,7 @@ gpio-poweroff {
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "ec100:red:power";
 			/*
 			 * Needs to go LOW (together with the poweroff GPIO)
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 04356bc639fa..73cdfe855689 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -34,7 +34,7 @@ emmc_pwrseq: emmc-pwrseq {
 
 	leds {
 		compatible = "gpio-leds";
-		blue {
+		led-blue {
 			label = "c1:blue:alive";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
-- 
2.34.1