[GIT PULL] amlogic ARM64 DT updates for v6.2
Neil Armstrong
neil.armstrong at linaro.org
Tue Nov 22 07:28:46 PST 2022
Hi,
Here's a set of Amlogic ARM64 DT changes for v6.2, with 1 new board:
- Support for SPI clk pullups on pre-G12A
- Active cooling on Odroid N2/N2+
- DDR PMU on G12A, G12B & SM1
- Update cache properties in Amlogic DTs
- remove clock-frequency from rtc in Amlogic DTs
- Initial support of the new Portable Game Console from Hardkernel: Odroid Go Ultra
Neil
The following changes since commit 9abf2313adc1ca1b6180c508c25f22f9395cc780:
Linux 6.1-rc1 (2022-10-16 15:36:24 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git tags/amlogic-arm64-dt-for-v6.2
for you to fetch changes up to 62e73f000696cc41cfd237a1ad90b001ad0f76c6:
arm64: dts: amlogic: add initial Odroid Go Ultra DTS (2022-11-21 11:51:56 +0100)
----------------------------------------------------------------
Amlogic ARM64 DT changes for v6.2:
- meson-gxl: add SPI pinctrl nodes for CLK
- meson-gxbb: add SPI pinctrl nodes for CLK
- Enable active coling using gpio-fan on Odroid N2/N2+
- remove clock-frequency from rtc
- Update cache properties for amlogic
- Add DDR PMU node for G12 series SoC
- document Odroid Go Ultra compatible
- add initial Odroid Go Ultra DTS
----------------------------------------------------------------
Amjad Ouled-Ameur (2):
arm64: dts: meson-gxl: add SPI pinctrl nodes for CLK
arm64: dts: meson-gxbb: add SPI pinctrl nodes for CLK
Anand Moon (1):
arm64: dts: meson: Enable active coling using gpio-fan on Odroid N2/N2+
Jiucheng Xu (1):
arm64: dts: meson: Add DDR PMU node
Neil Armstrong (2):
dt-bindings: amlogic: document Odroid Go Ultra compatible
arm64: dts: amlogic: add initial Odroid Go Ultra DTS
Pierre Gondois (1):
arm64: dts: Update cache properties for amlogic
Sebastian Reichel (1):
arm64: dts: meson: remove clock-frequency from rtc
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 +
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 5 +
.../dts/amlogic/meson-g12b-odroid-go-ultra.dts | 722 +++++++++++++++++++++
.../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 42 ++
arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 5 +
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 14 +
.../dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 1 -
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 14 +
.../boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 1 -
.../boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts | 1 -
arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 5 +
16 files changed, 818 insertions(+), 3 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
More information about the linux-amlogic
mailing list