[PATCH] drm/meson: add YUV422 output support
Neil Armstrong
narmstrong at baylibre.com
Wed May 18 00:10:01 PDT 2022
On 16/05/2022 09:22, Christian Hewitt wrote:
> From: Dongjin Kim <tobetter at gmail.com>
>
> Support YUV422 output from the Amlogic Meson SoC VPU to the HDMI
> controller. Without this YUV422 format out of the HDMI encoder
> leads to using the dw-hdmi YUV444 to YUV422 color conversion which
> gives wrong colors and a green line on the left edge of the screen.
>
> Signed-off-by: Dongjin Kim <tobetter at gmail.com>
> Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
> Tested-by: Furkan Kardame <f.kardame at manjaro.org>
> ---
> I've had this patch in my sources for some time now; originally picked
> from Dongjin's mainline branches for Hardkernel boards and tweaked for
> some minor renaming after DRM bridge changes were merged. Furkhan has
> reminded me this is still needed a couple of days ago and now the same
> issue is reported on the mailing list [0] so best to submit it. If a
> fixes tag is required? please advise the commit and i'll resend.
>
> drivers/gpu/drm/meson/meson_encoder_hdmi.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/meson/meson_encoder_hdmi.c b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
> index 5e306de6f485..08529efb4405 100644
> --- a/drivers/gpu/drm/meson/meson_encoder_hdmi.c
> +++ b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
> @@ -218,7 +218,8 @@ static void meson_encoder_hdmi_atomic_enable(struct drm_bridge *bridge,
> if (encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24) {
> ycrcb_map = VPU_HDMI_OUTPUT_CRYCB;
> yuv420_mode = true;
> - }
> + } else if (encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYVY8_1X16)
> + ycrcb_map = VPU_HDMI_OUTPUT_CRYCB;
>
> /* VENC + VENC-DVI Mode setup */
> meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, yuv420_mode, mode);
> @@ -230,6 +231,10 @@ static void meson_encoder_hdmi_atomic_enable(struct drm_bridge *bridge,
> /* Setup YUV420 to HDMI-TX, no 10bit diphering */
> writel_relaxed(2 | (2 << 2),
> priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
> + else if (encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYVY8_1X16)
> + /* Setup YUV422 to HDMI-TX, no 10bit diphering */
> + writel_relaxed(1 | (2 << 2),
> + priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
> else
> /* Setup YUV444 to HDMI-TX, no 10bit diphering */
> writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
> @@ -257,6 +262,7 @@ static void meson_encoder_hdmi_atomic_disable(struct drm_bridge *bridge,
>
> static const u32 meson_encoder_hdmi_out_bus_fmts[] = {
> MEDIA_BUS_FMT_YUV8_1X24,
> + MEDIA_BUS_FMT_UYVY8_1X16,
> MEDIA_BUS_FMT_UYYVYY8_0_5X24,
> };
>
Acked-by: Neil Armstrong <narmstrong at baylibre.com>
More information about the linux-amlogic
mailing list